We investigate the use of multiple transmitting and/or receiving antennas for single user communications over the additive Gaussian channel with and without fading. We derive formulas for the capacities and error exponents of such channels, and describe computational procedures to evaluate such formulas. We show that the potential gains of such multi-antenna systems over single-antenna systems is rather large under independenceassumptions for the fades and noises at different receiving antennas.

/pdf/capacity-of-multi-antenna-gaussian-channels-3axdfdd5ns.pdf

Capacity of Multi‐antenna Gaussian Channels

Cognitive radio is viewed as a novel approach for improving the utilization of a precious natural resource: the radio electromagnetic spectrum. The cognitive radio, built on a software-defined radio, is defined as an intelligent wireless communication system that is aware of its environment and uses the methodology of understanding-by-building to learn from the environment and adapt to statistical variations in the input stimuli, with two primary objectives in mind: /spl middot/ highly reliable communication whenever and wherever needed; /spl middot/ efficient utilization of the radio spectrum. Following the discussion of interference temperature as a new metric for the quantification and management of interference, the paper addresses three fundamental cognitive tasks. 1) Radio-scene analysis. 2) Channel-state estimation and predictive modeling. 3) Transmit-power control and dynamic spectrum management. This work also discusses the emergent behavior of cognitive radio.

/pdf/cognitive-radio-brain-empowered-wireless-communications-9m6gu0vz1z.pdf

Cognitive radio: brain-empowered wireless communications

Wireless Communications

What will 5G be? What it will not be is an incremental advance on 4G. The previous four generations of cellular technology have each been a major paradigm shift that has broken backward compatibility. Indeed, 5G will need to be a paradigm shift that includes very high carrier frequencies with massive bandwidths, extreme base station and device densities, and unprecedented numbers of antennas. However, unlike the previous four generations, it will also be highly integrative: tying any new 5G air interface and spectrum together with LTE and WiFi to provide universal high-rate coverage and a seamless user experience. To support this, the core network will also have to reach unprecedented levels of flexibility and intelligence, spectrum regulation will need to be rethought and improved, and energy and cost efficiencies will become even more critical considerations. This paper discusses all of these topics, identifying key challenges for future research and preliminary 5G standardization activities, while providing a comprehensive overview of the current literature, and in particular of the papers appearing in this special issue.

What Will 5G Be

The global bandwidth shortage facing wireless carriers has motivated the exploration of the underutilized millimeter wave (mm-wave) frequency spectrum for future broadband cellular communication networks. There is, however, little knowledge about cellular mm-wave propagation in densely populated indoor and outdoor environments. Obtaining this information is vital for the design and operation of future fifth generation cellular networks that use the mm-wave spectrum. In this paper, we present the motivation for new mm-wave cellular systems, methodology, and hardware for measurements and offer a variety of measurement results that show 28 and 38 GHz frequencies can be used when employing steerable directional antennas at base stations and mobile devices.

Millimeter Wave Mobile Communications for 5G Cellular: It Will Work!

Communications at mm-wave frequencies and above rely heavily on beamforming antenna arrays. Typically, hundreds, if not thousands, of independent antenna channels are used to achieve high SNR for throughput and increased capacity. Using a dedicated ADC per antenna receiver is preferable but it’s not practical for very large arrays due to unreasonable cost and complexity. Frequency division multiplexing (FDM) is a well-known technique for combining multiple signals into a single wideband channel. In a first of its kind measurements, this paper explores FDM for combining multiple antenna outputs at IF into a single wideband signal that can be sampled and digitized using a high-speed wideband ADC. The sampled signals are sub-band filtered and digitally down-converted to obtain individual antenna channels. A prototype receiver was realized with a uniform linear array consisting of 4 elements with 250 MHz bandwidth per channel at 28 GHz carrier frequency. Each of the receiver chains were frequency-multiplexed at an intermediate frequency of 1 GHz to avoid the requirement for multiple, precise local oscillators (LOs). Combined narrowband receiver outputs were sampled using a single ADC with digital front-end operating on a Xilinx ZCU-1285 RF SoC FPGA to synthesize 4 digital beams. The approach allows $M$ -fold increase in spatial degrees of freedom per ADC, for temporal oversampling by a factor of $M$ .

Frequency-Multiplexed Array Digitization for MIMO Receivers: 4-Antennas/ADC at 28 GHz on Xilinx ZCU-1285 RF SoC

A resonant electromagnetic cavity - effectively the interior of a copper box - constitutes a highly favorable propa-gation environment for MIMO communications. A fundamental limitation on wireless communication within the box is thermal noise. Under conditions of thermal equilibrium the Equipartition Theorem of classical statistical mechanics states that every orthogonal normal mode has an independent random amplitude such that the expected energies of the modes are equal and proportional to absolute temperature. Collectively the randomly excited modes constitute a space-time stochastic process, station-ary in time but non-stationary in space because of boundary conditions. As the linear dimensions of the box grow relative to a wavelength the process is asymptotically stationary. At each temporal frequency the wavenumber spectral density is identical to that of the Clarke model - a superposition of random plane waves having no preferred direction of propagation. At a single point in space the spectral density is proportional to the square of temporal frequency - the Rayleigh-Jeans spectrum. We call our space-time noise model Rayleigh-Jeans-Clarke (RJC).

Rayleigh-Jeans-Clarke Model for Wireless Noise in a Resonant Cavity: Scalar Case

Réseau d' antennes à sensibilité réduite pour des effets de décalage de fréquence

Parameter Estimation Problems with Singular

Information theory, starting with Shannon’s groundbreaking work, has fundamentally shaped the way communication systems are designed and operated. Information theoretic principles form the underpinnings of modern communication networks. This issue explores how new advances in information theory can impact future communication systems. Several papers address issues at the heart of next generation wireless and wired networks: Multiple access, including access by a massive number of devices, multi-hop, large antenna arrays, communication security, and timeliness of information. Others consider new applications such as joint communication and sensing, communication for learning and inference, wireless imaging, and new storage mediums such as DNA, thereby providing the information theoretic foundations of modalities beyond human-to-human communications. 

Thomas L. Marzetta

Papers

Frequency-Multiplexed Array Digitization for MIMO Receivers: 4-Antennas/ADC at 28 GHz on Xilinx ZCU-1285 RF SoC

Rayleigh-Jeans-Clarke Model for Wireless Noise in a Resonant Cavity: Scalar Case

Réseau d' antennes à sensibilité réduite pour des effets de décalage de fréquence

Parameter Estimation Problems with Singular

Editorial Issue on "Information Theoretic Foundations of Future Communication Systems"