In the past several years, research in each of the wide‐band‐gap semiconductors, SiC, GaN, and ZnSe, has led to major advances which now make them viable for device applications. The merits of each contender for high‐temperature electronics and short‐wavelength optical applications are compared. The outstanding thermal and chemical stability of SiC and GaN should enable them to operate at high temperatures and in hostile environments, and also make them attractive for high‐power operation. The present advanced stage of development of SiC substrates and metal‐oxide‐semiconductor technology makes SiC the leading contender for high‐temperature and high‐power applications if ohmic contacts and interface‐state densities can be further improved. GaN, despite fundamentally superior electronic properties and better ohmic contact resistances, must overcome the lack of an ideal substrate material and a relatively advanced SiC infrastructure in order to compete in electronics applications. Prototype transistors have been fabricated from both SiC and GaN, and the microwave characteristics and high‐temperature performance of SiC transistors have been studied. For optical emitters and detectors, ZnSe, SiC, and GaN all have demonstrated operation in the green, blue, or ultraviolet (UV) spectra. Blue SiC light‐emitting diodes (LEDs) have been on the market for several years, joined recently by UV and blue GaN‐based LEDs. These products should find wide use in full color display and other technologies. Promising prototype UV photodetectors have been fabricated from both SiC and GaN. In laser development, ZnSe leads the way with more sophisticated designs having further improved performance being rapidly demonstrated. If the low damage threshold of ZnSe continues to limit practical laser applications, GaN appears poised to become the semiconductor of choice for short‐wavelength lasers in optical memory and other applications. For further development of these materials to be realized, doping densities (especially p type) and ohmic contact technologies have to be improved. Economies of scale need to be realized through the development of larger SiC substrates. Improved substrate materials, ideally GaN itself, need to be aggressively pursued to further develop the GaN‐based material system and enable the fabrication of lasers. ZnSe material quality is already outstanding and now researchers must focus their attention on addressing the short lifetimes of ZnSe‐based lasers to determine whether the material is sufficiently durable for practical laser applications. The problems related to these three wide‐band‐gap semiconductor systems have moved away from materials science toward the device arena, where their technological development can rapidly be brought to maturity.

Large‐band‐gap SiC, III‐V nitride, and II‐VI ZnSe‐based semiconductor device technologies

Silicon carbide (SiC), a material long known with potential for high-temperature, high-power, high-frequency, and radiation hardened applications, has emerged as the most mature of the wide-bandgap (2.0 eV ≲ Eg ≲ 7.0 eV) semiconductors since the release of commercial 6HSiC bulk substrates in 1991 and 4HSiC substrates in 1994. Following a brief introduction to SiC material properties, the status of SiC in terms of bulk crystal growth, unit device fabrication processes, device performance, circuits and sensors is discussed. Emphasis is placed upon demonstrated high-temperature applications, such as power transistors and rectifiers, turbine engine combustion monitoring, temperature sensors, analog and digital circuitry, flame detectors, and accelerometers. While individual device performances have been impressive (e.g. 4HSiC MESFETs with fmax of 42 GHz and over 2.8 W mm−1 power density; 4HSiC static induction transistors with 225 W power output at 600 MHz, 47% power added efficiency (PAE), and 200 V forward blocking voltage), material defects in SiC, in particular micropipe defects, remain the primary impediment to wide-spread application in commercial markets. Micropipe defect densities have been reduced from near the 1000 cm−2 order of magnitude in 1992 to 3.5 cm−2 at the research level in 1995.

Status of silicon carbide (SiC) as a wide-bandgap semiconductor for high-temperature applications: A review

In this review, the structural, mechanical, thermal, and chemical properties of substrates used for gallium nitride (GaN) epitaxy are compiled, and the properties of GaN films deposited on these substrates are reviewed. Among semiconductors, GaN is unique; most of its applications uses thin GaN films deposited on foreign substrates (materials other than GaN); that is, heteroepitaxial thin films. As a consequence of heteroepitaxy, the quality of the GaN films is very dependent on the properties of the substrate—both the inherent properties such as lattice constants and thermal expansion coefficients, and process induced properties such as surface roughness, step height and terrace width, and wetting behavior. The consequences of heteroepitaxy are discussed, including the crystallographic orientation and polarity, surface morphology, and inherent and thermally induced stress in the GaN films. Defects such as threading dislocations, inversion domains, and the unintentional incorporation of impurities into the epitaxial GaN layer resulting from heteroepitaxy are presented along with their effect on device processing and performance. A summary of the structure and lattice constants for many semiconductors, metals, metal nitrides, and oxides used or considered for GaN epitaxy is presented. The properties, synthesis, advantages and disadvantages of the six most commonly employed substrates (sapphire, 6H-SiC, Si, GaAs, LiGaO 2 , and AlN) are presented. Useful substrate properties such as lattice constants, defect densities, elastic moduli, thermal expansion coefficients, thermal conductivities, etching characteristics, and reactivities under deposition conditions are presented. Efforts to reduce the defect densities and to optimize the electrical and optical properties of the GaN epitaxial film by substrate etching, nitridation, and slight misorientation from the (0 0 0 1) crystal plane are reviewed. The requirements, the obstacles, and the results to date to produce zincblende GaN on 3C-SiC/Si(0 0 1) and GaAs are discussed. Tables summarizing measures of the GaN quality such as XRD rocking curve FWHM, photoluminescence peak position and FWHM, and electron mobilities for GaN epitaxial layers produced by MOCVD, MBE, and HVPE for each substrate are given. The initial results using GaN substrates, prepared as bulk crystals and as free-standing epitaxial films, are reviewed. Finally, the promise and the directions of research on new potential substrates, such as compliant and porous substrates are described.

Substrates for gallium nitride epitaxy

Power semiconductor devices are key components in power conversion systems. Silicon carbide (SiC) has received increasing attention as a wide-bandgap semiconductor suitable for high-voltage and low-loss power devices. Through recent progress in the crystal growth and process technology of SiC, the production of medium-voltage (600?1700 V) SiC Schottky barrier diodes (SBDs) and power metal?oxide?semiconductor field-effect transistors (MOSFETs) has started. However, basic understanding of the material properties, defect electronics, and the reliability of SiC devices is still poor. In this review paper, the features and present status of SiC power devices are briefly described. Then, several important aspects of the material science and device physics of SiC, such as impurity doping, extended and point defects, and the impact of such defects on device performance and reliability, are reviewed. Fundamental issues regarding SiC SBDs and power MOSFETs are also discussed.

https://iopscience.iop.org/article/10.7567/JJAP.54.040103/pdf

Material science and device physics in SiC technology for high-voltage power devices

The wet etching of GaN, AlN, and SiC is reviewed including conventional etching in aqueous solutions, electrochemical etching in electrolytes and defect-selective chemical etching in molten salts. The mechanism of each etching process is discussed. Etching parameters leading to highly anisotropic etching, dopant-type/bandgap selective etching, defect-selective etching, as well as isotropic etching are discussed. The etch pit shapes and their origins are discussed. The applications of wet etching techniques to characterize crystal polarity and defect density/distribution are reviewed. Additional applications of wet etching for device fabrication, such as producing crystallographic etch profiles, are also reviewed.

Wet etching of GaN, AlN, and SiC : a review

Investigation of growth processes of ingots of silicon carbide single crystals

General principles of growing large-size single crystals of various silicon carbide polytypes

Studies of growth kinetics and polytypism of silicon carbide epitaxial layers grown from the vapour phase

Doping processes of silicon carbide crystals with scandium are investigated. It is shown that the scandium solubility in SiC is limited within the 1800 to 2600°C temperature range and amounts to (2 to 3) × 1017 cm−3. On doping silicon carbide crystals with scandium the VLS growth mechanism is possible. The luminescence spectra of the crystals are studied. It is found that nitrogen actively affects the luminescence intensity of silicon carbide doped with scandium. The depth of the radiative recombination centre in SiC (Sc) which is acceptor like is found to be 0.24 eV.



[Russian Text Ignored].

Investigation of silicon carbide single crystals doped with scandium

A qualitative dependence of polytype structures 6H, 15R, and 3C on the partial pressure of nitrogen in the interval 4 to 760 Torr is obtained by optical and X-ray studies of SiC epitaxial layers, grown by recrystallization in the gaseous phase at 1900 to 2300°C. The morphological peculiarities of β-SiC epitaxial layers, grown on the (0001) and (0001) faces of the α-SiC substrate are determined. The strained regions of the α-SiC monocrystals, due to inhomogeneous nitrogen-doping, are established by optical and X-ray methods. The effect of nitrogen on the polytype stability of SiC is the basis of the discussion of the experimental data.



[Russian Text Ignored]

V. F. Tsvetkov

Papers

Investigation of growth processes of ingots of silicon carbide single crystals

General principles of growing large-size single crystals of various silicon carbide polytypes

Studies of growth kinetics and polytypism of silicon carbide epitaxial layers grown from the vapour phase

Investigation of silicon carbide single crystals doped with scandium

Structural and morphological peculiarities of the epitaxial layers and monocrystals of silicon carbide highly doped by nitrogen