The sliding wear behaviour of CoCrFeMnNi and AlxCoCrFeNi high entropy alloys at elevated temperatures

Tribological behavior of an AlCoCrFeNi2.1 eutectic high entropy alloy sliding against different counterfaces

A review on laser cladding of high-entropy alloys, their recent trends and potential applications

Effects of Ti-to-Al ratios on the phases, microstructures, mechanical properties, and corrosion resistance of Al2-xCoCrFeNiTix high-entropy alloys

In-situ TiC reinforced CoCrCuFeNiSi0.2 high-entropy alloy coatings designed for enhanced wear performance by laser cladding

The tribological properties of Al0.6CoCrFeNi high-entropy alloy with the σ phase precipitation at elevated temperature

A systematic research on the tribological characteristics of Ti48Zr20Nb12Cu5Be15 metallic glass matrix composites was performed under different normal loads in dry condition and simulated seawater. The wear rate decreased with the increase in normal load under dry and simulated seawater conditions. The friction coefficient was lower in the dry condition than in the simulated seawater. The composite showed better wear resistance at lower loads (3, 5 and 10 N) but poor wear resistance at higher loads (15 and 17 N) in the simulated seawater. The analysis of the worn surface illustrated that the wear mechanism in dry condition was plastic deformation, adhesive wear and abrasive wear at 3 and 5 N, while it was abrasive wear and adhesive wear at 10, 15 and 17 N. The wear mechanism in simulated seawater was abrasive wear, plastic deformation and adhesive wear at 3 N, adhesive wear at 10 N, and abrasive wear at 5, 15 and 17 N. At the same time, the corrosion occurred during wear tests in the simulated seawater.

Xiao-hui Shi

Papers

The tribological properties of Al0.6CoCrFeNi high-entropy alloy with the σ phase precipitation at elevated temperature

Sliding tribological characteristics of Ti48Zr20Nb12Cu5Be15 metallic glass matrix composites under different conditions

Entropy versus enthalpy in hexagonal-close-packed high-entropy alloys