Xu Shiwei

TL;DR: In this paper, a quasi-in-situ electron backscatter diffraction (EBSD) method was used to study the texture evolution in cold-rolled Mg-0.3Zn- 0.1Ca alloys during static recrystallization.

TL;DR: In this paper, an exceptionally high strength Mg 3Al 1Zn-03Mn wt% (AZ31) was demonstrated, revealing a yield strength of 380 MPa in both tension and compression, for extrusions prepared at 175°C Extruded AZ31 was extruded at different temperatures to reveal an exceptionally high strength with ultrafine grains of 065μm in diameter.

TL;DR: In this article, the authors reported direct observations of atomic structures of both end and broad interfaces of a deformed and annealed Mg-Gd solid solution single phase alloy using atomic-resolution high-angle annular scanning transmission electron microscopy.

TL;DR: In this article, a family of alloys based on the Mg-Al-Zn-Ca-Mn system (Mg-3Al-1 Zn-1Ca-0.3Mn, wt-pct) was developed for extrusion and the microstructures of the extruded alloys were characterized in detail in order to reveal the effect of Ca on microstructural evolution and consequently the alloy strength.

TL;DR: In this paper, a set of complementary in-situ characterisation techniques over multiple-length scales were utilised to reveal the deformation modes enabling the ductility of extruded polycrystalline pure magnesium (Mg).