By forming a highly stable Al2O3 gate oxide on a C-H bonded channel of diamond, high-temperature, and high-voltage metal-oxide-semiconductor field-effect transistor (MOSFET) has been realized. From room temperature to 400 °C (673 K), the variation of maximum drain-current is within 30% at a given gate bias. The maximum breakdown voltage (VB) of the MOSFET without a field plate is 600 V at a gate-drain distance (LGD) of 7 μm. We fabricated some MOSFETs for which VB/LGD > 100 V/μm. These values are comparable to those of lateral SiC or GaN FETs. The Al2O3 was deposited on the C-H surface by atomic layer deposition (ALD) at 450 °C using H2O as an oxidant. The ALD at relatively high temperature results in stable p-type conduction and FET operation at 400 °C in vacuum. The drain current density and transconductance normalized by the gate width are almost constant from room temperature to 400 °C in vacuum and are about 10 times higher than those of boron-doped diamond FETs.

C-H surface diamond field effect transistors for high temperature (400 °C) and high voltage (500 V) operation

A survey of Gallium Nitride HEMT for RF and high power applications

An AlN barrier high electron mobility transistor (HEMT) based on the AlN/Al0.85Ga0.15N heterostructure was grown, fabricated, and electrically characterized, thereby extending the range of Al composition and bandgap for AlGaN channel HEMTs. An etch and regrowth procedure was implemented for source and drain contact formation. A breakdown voltage of 810 V was achieved without a gate insulator or field plate. Excellent gate leakage characteristics enabled a high Ion/Ioff current ratio greater than 107 and an excellent subthreshold slope of 75 mV/decade. A large Schottky barrier height of 1.74 eV contributed to these results. The room temperature voltage-dependent 3-terminal off-state drain current was adequately modeled with Frenkel-Poole emission.

An AlN/Al0.85Ga0.15N high electron mobility transistor

This paper describes recent technological advances on III-nitride-based transistors for power switching applications. Focuses are placed on the progress toward enhancing the breakdown voltage, lowering the ON-resistance, suppressing current collapse, and reducing the leakage current in AlGaN/GaN high-electron mobility transistors (HEMTs). Recent publications revealed that the tradeoff relation between ON-resistance and breakdown voltage in AlGaN/GaN HEMTs exceeded the SiC limit and was getting close to the GaN limit; however, the breakdown voltage achieved was still lower than the theoretical impact ionization limit. A novel process featuring strain-controlled annealing with a metal stack, including Al gave rise to significant reduction in the sheet resistance in AlGaN/GaN heterostructures, suggesting the possibility of dramatic reduction in ON-resistance of GaN-based power devices. Some of the interesting approaches to suppress current collapse indicated that surface trapping effects must be controlled by the optimization of surface processing as well as by the reduction of bulk traps in the epitaxial layers. Close correlation between the local gate leakage current and point defects exposed on the free-standing GaN substrate demonstrated that further reduction of defects on bulk GaN substrates is truly required as future challenges.

Low-Loss and High-Voltage III-Nitride Transistors for Power Switching Applications

https://iopscience.iop.org/article/10.1149/2.0111702jss/pdf

Review—Ultra-Wide-Bandgap AlGaN Power Electronic Devices

Enhanced performance of RF power modules is required in a next-generation information society. To satisfy these requirements, we designed a novel high-electron mobility transistor (HEMT) structure employing wider bandgap AlGaN for a channel layer, which we called AlGaN channel HEMT, and investigated it. The wider bandgap is more effective for higher voltage operation of HEMTs and contributes to the increase of output power in RF power modules. As a result, fabricated AlGaN channel HEMTs had much higher breakdown voltages than those of conventional GaN channel HEMTs with good pinchoff operation and sufficiently high drain current density without noticeable current collapse. Furthermore, specific on-state resistances of fabricated AlGaN channel HEMTs were competitive with the best values of reported GaN- and SiC-based devices with similar breakdown voltages. These results indicate that the proposed AlGaN channel HEMTs are very promising not only for an information-communication society but also in the power electronics field.

Y. Suzuki

Papers

AlGaN Channel HEMT With Extremely High Breakdown Voltage