https://cyberleninka.org/article/n/638974.pdf

Characteristics and adsorption capacities of low-cost sorbents for wastewater treatment: A review

Adsorption of chromium (VI) by ethylenediamine-modified cross-linked magnetic chitosan resin: isotherms, kinetics and thermodynamics.

Applications of chitin- and chitosan-derivatives for the detoxification of water and wastewater--a short review.

Removal of heavy metal ions using chitosan and modified chitosan: A review

A facile thermodecomposition process to synthesize magnetic graphene nanocomposites (MGNCs) is reported. High-resolution transmission electron microscopy and energy filtered elemental mapping revealed a core@double-shell structure of the nanoparticles with crystalline iron as the core, iron oxide as the inner shell and amorphous Si–S–O compound as the outer shell. The MGNCs demonstrate an extremely fast Cr(VI) removal from the wastewater with a high removal efficiency and with an almost complete removal of Cr(VI) within 5 min. The adsorption kinetics follows the pseudo-second-order model and the novel MGNC adsorbent exhibits better Cr(VI) removal efficiency in solutions with low pH. The large saturation magnetization (96.3 emu/g) of the synthesized nanoparticles allows fast separation of the MGNCs from liquid suspension. By using a permanent magnet, the recycling process of both the MGNC adsorbents and the adsorbed Cr(VI) is more energetically and economically sustainable. The significantly reduced treatm...

One-pot synthesis of magnetic graphene nanocomposites decorated with core@double-shell nanoparticles for fast chromium removal

Adsorption of chromium on chitosan: Optimization, kinetics and thermodynamics

In this study, typical niches of acetic acid bacteria were screened for isolation of cellulose producer strains. Hestrin Schramm broth was used as enrichment and production media. Only nine out of 329 isolates formed thick biofilms on liquid surface and were identified as potential cellulose producers. Physiological and biochemical tests proved that all cellulose producers belonged to Gluconacetobacter genus. Most productive and mutation-resistant strain was subjected to 16S rRNA sequence analysis and identified as Gluconacetobacter hansenii P2A due to 99.8 % sequence similarity. X-ray diffraction analysis proved that the biofilm conformed to Cellulose I crystal structure, rich in Iα mass fraction. Static cultivation of G. hansenii P2A in HS medium resulted with 1.89 ± 0.08 g/l of bacterial cellulose production corresponding to 12.0 ± 0.3 % yield in terms of substrate consumption. Shaking and agitation at 120 rpm aided in enhancement of the amount and yield of produced cellulose. Productivity and yield reached up to 3.25 ± 0.11 g/l and 17.20 ± 0.14 % in agitated culture while a slight decrease from 78.7 % to 77.3 % was observed in the crystallinity index.

Isolation and characterization of an efficient bacterial cellulose producer strain in agitated culture: Gluconacetobacter hansenii P2A

Biocatalysis is a growing field in the production of fine chemicals and will most probably increase its share in the future. Enzymatic reactions are carried out under mild conditions, i.e., non-toxic solvents, low temperature and pressure, which eliminates most environmental drawbacks associated with conventional production methods. The superiority of chemo-, regio- and enantioselectivity of enzymes exhibit significant advantages over conventional catalysts for production of fine chemicals, flavors, fragrances, agrochemicals and pharmaceuticals. Enzymes can function both in aqueous and non-aqueous solvents. As a result of the growing scientific and industrial interest towards green chemistry, green solvent systems, which are mainly water, supercritical fluids, ionic liquids, fluorinated solvents, and solvent-free systems have become more popular in biocatalysis. However, the activity and selectivity of an enzyme is heavily dependent on solvent properties. In this review, various green solvents were classified and some of their influential features on enzyme activity were discussed.

/pdf/enzymatic-processes-in-alternative-reaction-media-a-mini-17y8jdlehg.pdf

Enzymatic processes in alternative reaction media: a mini review

This study presents the results of chromate adsorption upon organically modified clinoptilolite obtained by the treatment of Bigadic clinoptilolite with surfactants in primary amine structure, namely 1-dodecylamine, 1-hexadecylamine and oleylamine. Natural and organo-clinoptilolites were characterized by X-ray diffraction, thermal gravimetry and Fourier transform infrared spectrometry which proved the integration of amine groups followed by the order oleylamine > 1-hexadecylamine > 1-dodecylamine. Organo-clinoptilolites were tested for their efficacy in chromate removal under base case conditions which implied 100 ppm initial concentration, pH 4.0, 10 g l−1 adsorbent dose and at 298 K. Results showed that amine loading induced chromate removal reaching up to 90 % for oleylamine-modified clinoptilolite. Experimentation was continued to determine the effects of pH, adsorbent dosage and initial concentration on chromate adsorption. Accordingly, maximum removal of 94.0 % was attained with 14 g l−1 of oleylamine-modified clinoptilolite, from Cr(VI) solution of 100 ppm initially at pH 3.0. Langmuir isotherm described the adsorption of chromate on oleylamine-modified clinoptilolite with 96.4 % consistency. Maximum theoretical uptake capacity was calculated as 6.72 mg g−1. Kinetic data were consistent with pseudo-second-order model with the controlling steps being film and pore diffusions.

/pdf/removal-of-chromate-from-wastewater-using-amine-based-49q02h61v2.pdf

Yasar Andelib Aydin

Papers

Adsorption of chromium on chitosan: Optimization, kinetics and thermodynamics

Isolation and characterization of an efficient bacterial cellulose producer strain in agitated culture: Gluconacetobacter hansenii P2A

Enzymatic processes in alternative reaction media: a mini review

Removal of chromate from wastewater using amine-based-surfactant-modified clinoptilolite

Chitosan polyvinyl alcohol blend films for ibuprofen encapsulation: Fabrication, characterization and kinetics