Degradation of antibiotics by advanced oxidation processes: An overview.

Fluorescent carbon dots (CDs) are a new class of carbon nanomaterials and have demonstrated excellent optical properties, good biocompatibility, great aqueous solubility, low cost, simple synthesis, etc. Since their discovery, various synthesis methods using different precursors have been developed, and are mainly classified as top-down and bottom-up approaches. For the mechanistic origin of CDs photoluminescence, three mechanisms have been proposed such as quantum confinement effect, surface state and molecule state. CDs have presented many applications, and this review article mainly focuses on the development of CDs based fluorescent sensors in recent 5 years. The sensing mechanisms, senor design and sensing properties to various targets are summarized. A broad range of analytes including cations, anions, small molecules, macromolecules, cells and bacteria have been discussed. In addition, the challenges and future directions for CDs as sensing materials are also presented.

Fluorescent carbon dots and their sensing applications

Hydrogen peroxide (H2 O2 ) has received increasing attention because it is not only a mild and environmentally friendly oxidant for organic synthesis and environmental remediation but also a promising new liquid fuel. The production of H2 O2 by photocatalysis is a sustainable process, since it uses water and oxygen as the source materials and solar light as the energy. Encouraging processes have been developed in the last decade for the photocatalytic production of H2 O2 . In this Review we summarize research progress in the development of processes for the photocatalytic production of H2 O2 . After a brief introduction emphasizing the superiorities of the photocatalytic generation of H2 O2 , the basic principles of establishing an efficient photocatalytic system for generating H2 O2 are discussed, highlighting the advanced photocatalysts used. This Review is concluded by a brief summary and outlook for future advances in this emerging research field.

Production of Hydrogen Peroxide by Photocatalytic Processes

Valorization of biomass waste to engineered activated biochar by microwave pyrolysis: Progress, challenges, and future directions

Nanoscale Bi-based photocatalysts are promising candidates for visible-light-driven photocatalytic environmental remediation and energy conversion. However, the performance of bulk bismuthal semiconductors is unsatisfactory. Increasing efforts have been focused on enhancing the performance of this photocatalyst family. Many studies have reported on component adjustment, morphology control, heterojunction construction, and surface modification. Herein, recent topics in these fields, including doping, changing stoichiometry, solid solutions, ultrathin nanosheets, hierarchical and hollow architectures, conventional heterojunctions, direct Z-scheme junctions, and surface modification of conductive materials and semiconductors, are reviewed. The progress in the enhancement mechanism involving light absorption, band structure tailoring, and separation and utilization of excited carriers, is also introduced. The challenges and tendencies in the studies of nanoscale Bi-based photocatalysts are discussed and summarized.

Review on nanoscale Bi-based photocatalysts

Recently, hexavalent chromium (Cr(VI)) in wastewater has become a threat to the ecosystem and human health. The synthesis of high-performance and recyclable photocatalysts still remains a challenge. The photoreduction efficiency of Cr(VI) is inhibited by the high rate of recombination of electron-hole pairs and the low adsorption capacity of Cr(VI). In this study, three-dimensional (3D) MoO3/ZIF-8 core-shell nanorod composite photocatalysts were prepared via a facile two-step method and applied to the reduction of Cr(VI). The chemical state of the elements, microstructure, surface elements, and optical properties of the MoO3/ZIF-8 core-shell nanorods were characterized by X-ray diffraction (XRD), Fourier transform infrared (FT-IR), scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), and UV–vis diffuse reflectance spectroscopy. The as-prepared MoO3@ZIF-8 catalysts displayed superior photocatalytic activity for Cr(VI) reduction under visible light, compared to the pure ZIF-8 and MoO3 nanowires. Further, MoO3@ZIF-8 (with 15% of ZIF-8) exhibited the best photocatalytic activity, and promoted 100% reduction of Cr(VI) (15 mg L−1) within 45 min. The 3-D core-shell structure not only provided a large surface area, but also separated the electron-hole pairs effectively. The photocatalytic activity of the composite remained almost unchanged after four cycles. The mechanism of Cr(VI) reduction is also discussed in detail.

Facile construction of MoO3@ZIF-8 core-shell nanorods for efficient photoreduction of aqueous Cr (VI)

Incorporation of RuO 2 into charcoal-derived carbon with controllable microporosity by CO 2 activation for high-performance supercapacitor

Serious water pollution and the exhausting of fossil resources have become worldwide urgent issues yet to be solved. Solar energy driving photocatalysis processes based on semiconductor catalysts is considered to be the most promising technique for the remediation of wastewater. However, the relatively low photocatalytic efficiency remains a critical limitation for the practical use of the photocatalysts. To solve this problem, numerous strategies have been developed for the preparation of advanced photocatalysts. Particularly, incorporating a semiconductor with various functional components from atoms to individual semiconductors or metals to form a composite catalyst have become a facile approach for the design of high-efficiency catalysts. Herein, the recent progress in the development of novel photocatalysts for wastewater treatment via various methods in the sight of composite techniques are systematically discussed. Moreover, a brief summary of the current challenges and an outlook for the development of composite photocatalysts in the area of wastewater treatment are provided.

Advanced Design and Synthesis of Composite Photocatalysts for the Remediation of Wastewater: A Review

Robust and highly fluorescent N-doped carbon dots (CDs) are obtained from a hybrid source, alginic acid and ethanediamine. During a hydrothermal process, the raw materials are propelled to form nano-sized particles; these resultant CDs possess desirable functional groups on the particle surface. We have further investigated their optical performance under various pH conditions as well as their capacity for sensing metal ions. The N-doped CDs especially exhibit remarkable acid-evoked fluorescence enhancement under acidic conditions. Finally, the as-prepared CDs are tested for their ability to detect Fe3+ in acidic pure water and urban river water media, and the fluorescence-quenching mechanism and recovery properties of the CD/Fe3+ mixture are also investigated.

Yifan Zhang

Papers

Facile construction of MoO3@ZIF-8 core-shell nanorods for efficient photoreduction of aqueous Cr (VI)

Incorporation of RuO 2 into charcoal-derived carbon with controllable microporosity by CO 2 activation for high-performance supercapacitor

Advanced Design and Synthesis of Composite Photocatalysts for the Remediation of Wastewater: A Review

One-step synthesis of robust nitrogen-doped carbon dots: acid-evoked fluorescence enhancement and their application in Fe3+ detection

Au–pd bimetallic alloy nanoparticle-decorated BiPO4 nanorods for enhanced photocatalytic oxidation of trichloroethylene