As a fascinating conjugated polymer, graphitic carbon nitride (g-C3N4) has become a new research hotspot and drawn broad interdisciplinary attention as a metal-free and visible-light-responsive photocatalyst in the arena of solar energy conversion and environmental remediation. This is due to its appealing electronic band structure, high physicochemical stability, and “earth-abundant” nature. This critical review summarizes a panorama of the latest progress related to the design and construction of pristine g-C3N4 and g-C3N4-based nanocomposites, including (1) nanoarchitecture design of bare g-C3N4, such as hard and soft templating approaches, supramolecular preorganization assembly, exfoliation, and template-free synthesis routes, (2) functionalization of g-C3N4 at an atomic level (elemental doping) and molecular level (copolymerization), and (3) modification of g-C3N4 with well-matched energy levels of another semiconductor or a metal as a cocatalyst to form heterojunction nanostructures. The constructi...

Graphitic Carbon Nitride (g-C3N4)-Based Photocatalysts for Artificial Photosynthesis and Environmental Remediation: Are We a Step Closer To Achieving Sustainability?

Sustainable hydrogen production is an essential prerequisite of a future hydrogen economy. Water electrolysis driven by renewable resource-derived electricity and direct solar-to-hydrogen conversion based on photochemical and photoelectrochemical water splitting are promising pathways for sustainable hydrogen production. All these techniques require, among many things, highly active noble metal-free hydrogen evolution catalysts to make the water splitting process more energy-efficient and economical. In this review, we highlight the recent research efforts toward the synthesis of noble metal-free electrocatalysts, especially at the nanoscale, and their catalytic properties for the hydrogen evolution reaction (HER). We review several important kinds of heterogeneous non-precious metal electrocatalysts, including metal sulfides, metal selenides, metal carbides, metal nitrides, metal phosphides, and heteroatom-doped nanocarbons. In the discussion, emphasis is given to the synthetic methods of these HER electrocatalysts, the strategies of performance improvement, and the structure/composition-catalytic activity relationship. We also summarize some important examples showing that non-Pt HER electrocatalysts could serve as efficient cocatalysts for promoting direct solar-to-hydrogen conversion in both photochemical and photoelectrochemical water splitting systems, when combined with suitable semiconductor photocatalysts.

Noble metal-free hydrogen evolution catalysts for water splitting

Semiconductor-mediated photocatalysis has received tremendous attention as it holds great promise to address the worldwide energy and environmental issues. To overcome the serious drawbacks of fast charge recombination and the limited visible-light absorption of semiconductor photocatalysts, many strategies have been developed in the past few decades and the most widely used one is to develop photocatalytic heterojunctions. This review attempts to summarize the recent progress in the rational design and fabrication of heterojunction photocatalysts, such as the semiconductor–semiconductor heterojunction, the semiconductor–metal heterojunction, the semiconductor–carbon heterojunction and the multicomponent heterojunction. The photocatalytic properties of the four junction systems are also discussed in relation to the environmental and energy applications, such as degradation of pollutants, hydrogen generation and photocatalytic disinfection. This tutorial review ends with a summary and some perspectives on the challenges and new directions in this exciting and still emerging area of research.

Semiconductor heterojunction photocatalysts: design, construction, and photocatalytic performances

Semiconductor-based photocatalysis is considered to be an attractive way for solving the worldwide energy shortage and environmental pollution issues. Since the pioneering work in 2009 on graphitic carbon nitride (g-C3N4) for visible-light photocatalytic water splitting, g-C3N4 -based photocatalysis has become a very hot research topic. This review summarizes the recent progress regarding the design and preparation of g-C3N4 -based photocatalysts, including the fabrication and nanostructure design of pristine g-C3N4 , bandgap engineering through atomic-level doping and molecular-level modification, and the preparation of g-C3N4 -based semiconductor composites. Also, the photo-catalytic applications of g-C3N4 -based photocatalysts in the fields of water splitting, CO2 reduction, pollutant degradation, organic syntheses, and bacterial disinfection are reviewed, with emphasis on photocatalysis promoted by carbon materials, non-noble-metal cocatalysts, and Z-scheme heterojunctions. Finally, the concluding remarks are presented and some perspectives regarding the future development of g-C3N4 -based photocatalysts are highlighted.

Polymeric Photocatalysts Based on Graphitic Carbon Nitride

Defect-rich MoS2 ultrathin nanosheets are synthesized on a gram scale for electrocatalytic hydrogen evolution. The novel defect-rich structure introduces additional active edge sites into the MoS2 ultrathin nanosheets, which significantly improves their electrocatalytic performance. Low onset overpotential and small Tafel slope, along with large cathodic current density and excellent durability, are all achieved for the novel hydrogen-evolution-reaction electrocatalyst.

Defect-rich MoS2 ultrathin nanosheets with additional active edge sites for enhanced electrocatalytic hydrogen evolution

The production of chemical fuels by using sunlight is an attractive and sustainable solution to the global energy and environmental problems. Photocatalytic water splitting is a promising route to capture, convert, and store solar energy in the simplest chemical compound (H2). [1] Since the initial report of a photoelectrochemical cell using Pt-TiO2 electrodes for hydrogen evolution by Fujishima and Honda in 1972, considerable studies have been focused on the development of highly efficient and stable photocatalyst powder systems, and especially on using earth-abundant semiconductors and co-factors for water splitting. In practice, the achievement of the conversion of solar energy into hydrogen necessitates the spatial integration of semiconductors and co-catalysts to form surface junctions, so as to optimize the capture of light and to promote charge separation and surface catalytic kinetics. The construction of effective surface junctions is therefore of vital importance, and not only strongly depends on the properties, such as crystal structure, band structure, and electron affinity, of both semiconductors and catalysts but also on the interface between the two materials. In photocatalysis, an ohmic contact between photocatalysts and cocatalysts can allow the prompt migration of light-induced charge, thus resulting in an efficient photocatalytic reaction. Recently, we found that graphitic carbon nitride (g-CN), a polymeric melon semiconductor with a layered structure analogous to graphite, meets the essential requirements as a sustainable solar energy transducer for water redox catalysis; these requirements include being abundant, highly-stable, and responsive to visible light. g-CN is indeed a new type of visible-light photocatalyst that contains no metals, and has a suitable electronic structure (Eg = 2.7 eV, conduction band at 0.8 V and valence band at 1.9 V vs. RHE) covering the water-splitting potentials. An improvement in the efficiency of H2 production has been demonstrated by the introduction of nanohierarchical structures into g-CN. It is noted that, like many other photocatalysts, g-CN alone shows very poor electrocatalytic activities for water splitting and relies on surface co-catalysts to activate its photocatalytic functions. The co-catalyst cooperates with the light harvester to facilitate the charge separation and increases the lifetime of the photogenerated electron/hole pair, while lowering activation barriers for H2 or O2 evolution. Thus, the use of a co-catalyst leads to an increase in overall photocatalytic performance, including activity, selectivity, and stability. Generally, the efficiency of a given photocatalytic system is dependent on the ability of the co-catalysts to support reductive and/or oxidative catalysis. In particular, the structural characteristics and intrinsic catalytic properties of a co-catalyst are important. However, the study of the structural and electronic compatibility between g-CN and co-catalysts has been limited so far. The co-catalysts used are mainly platinum group metals or their oxides, which are scarce and expensive. Photocatalytic/catalytic systems based on abundantly available materials are certainly desirable for large-scale hydrogen production for future energy production based on water and sunlight. Among various hydrogen-evolution reaction (HER) catalysts, molybdenum sulfur complexes have received a lot of attention. MoS2 was found to be a good electrocatalyst for H2 evolution, and the HER activity stemmed from the sulfur edges of the MoS2 crystal layers. [10] When grown on graphene sheets, nanostructured MoS2 exhibited excellent HER activity owing to the high exposure of the edges and the strong electronic coupling to the underlying planar support. Incomplete cubane [Mo3S4] + clusters and amorphous MoS2 are also proven HER catalysts. Some of these HER catalysts have been used in photocatalytic H2 production and they exhibited a remarkable promoting effect. MoS2 has a similar structure to graphite; it has a layered crystal structure consisting of S Mo S “sandwiches” held together by van der Waals force. The fact that g-CN and MoS2 have analogous layered structures should minimize the lattice mismatch and facilitate the planar growth of MoS2 slabs over the g-CN surface, thus constructing an organic–inorganic hybrid with graphene-like thin layered heterojunctions (Scheme 1a). Such a distinct nanoscale structure has some advantages. It can increase the accessible area around the planar interface of the MoS2 and g-CN layers and diminish the barriers for electron transport through the co-catalyst, thus facilitating fast electron transfer across the interface by the electron tunneling effect. Also, thin layers can lessen the light blocking effect of the co-catalyst, thus improving the light utilization by g-CN. Importantly, the intrinsic band structures [*] Y. Hou, J. Zhang, G. Zhang, Y. Zhu, Prof. X. Wang Research Institute of Photocatalysis, College of Chemistry and Chemical Engineering, Fuzhou University Fuzhou 350002 (China) E-mail: xcwang@fzu.edu.cn

Layered Nanojunctions for Hydrogen-Evolution Catalysis†

Mesoporous graphitic$ carbon nitride (mpg-CN) was loaded with WS 2 via an impregnation–sulfidation approach. The resultant surface heterojunctions between WS 2 and mpg-CN were evidently confirmed with transmission electron microscopy (TEM) and X-ray photoelectron spectroscopy (XPS). Photocatalytic H 2 production on WS 2 /mpg-CN under visible light ( λ  > 420 nm) shows that WS 2 plays an important role in catalyzing H 2 production. The rate of hydrogen evolution reaches an optimum when the loading amount of WS 2 is about 0.3 at.%. Combined with the physicochemical and electrocatalytic properties of WS 2 /mpg-CN, it can be concluded that the enhanced photocatalytic H 2 production activity on WS 2 /mpg-CN is mainly attributed to the thin layered junctions formed between WS 2 and mpg-CN and the great performance of WS 2 as a cocatalyst in H 2 evolution reaction.

Yongsheng Zhu

Papers

Layered Nanojunctions for Hydrogen-Evolution Catalysis†

Photocatalytic hydrogen production over carbon nitride loaded with WS2 as cocatalyst under visible light

Cobalt sulfide modified graphitic carbon nitride semiconductor for solar hydrogen production