The Helioseismic and Magnetic Imager (HMI) instrument and investigation as a part of the NASA Solar Dynamics Observatory (SDO) is designed to study convection-zone dynamics and the solar dynamo, the origin and evolution of sunspots, active regions, and complexes of activity, the sources and drivers of solar magnetic activity and disturbances, links between the internal processes and dynamics of the corona and heliosphere, and precursors of solar disturbances for space-weather forecasts. A brief overview of the instrument, investigation objectives, and standard data products is presented.

/pdf/the-helioseismic-and-magnetic-imager-hmi-investigation-for-2omq27f3k3.pdf

The Helioseismic and Magnetic Imager (HMI) Investigation for the Solar Dynamics Observatory (SDO)

Monthly Notices is one of the three largest general primary astronomical research publications. It is an international journal, published by the Royal Astronomical Society. This article 1 describes its publication policy and practice.

Monthly Notices of the Royal Astronomical Society

We propose a new model for the initiation of a solar coronal mass ejection (CME). The model agrees with two properties of CMEs and eruptive flares that have proved to be very difficult to explain with previous models: (1) very low-lying magnetic field lines, down to the photospheric neutral line, can open toward infinity during an eruption; and (2) the eruption is driven solely by magnetic free energy stored in a closed, sheared arcade. Consequently, the magnetic energy of the closed state is well above that of the posteruption open state. The key new feature of our model is that CMEs occur in multipolar topologies in which reconnection between a sheared arcade and neighboring flux systems triggers the eruption. In this "magnetic breakout" model, reconnection removes the unsheared field above the low-lying, sheared core flux near the neutral line, thereby allowing this core flux to burst open. We present numerical simulations that demonstrate our model can account for the energy requirements for CMEs. We discuss the implication of the model for CME/flare prediction.

https://iopscience.iop.org/article/10.1086/306563/pdf

A Model for Solar Coronal Mass Ejections

The ideal helical kink instability of a force-free coronal magnetic flux rope, anchored in the photosphere, is studied as a model for solar eruptions. Using the flux rope model of Titov and D?moulin as the initial condition in MHD simulations, both the development of helical shape and the rise profile of a confined (or failed) filament eruption (on 2002 May 27) are reproduced in very good agreement with the observations. By modifying the model such that the magnetic field decreases more rapidly with height above the flux rope, a full (or ejective) eruption of the rope is obtained in very good agreement with the developing helical shape and the exponential-to-linear rise profile of a fast coronal mass ejection (CME) on 2001 May 15. This confirms that the helical kink instability of a twisted magnetic flux rope can be the mechanism of the initiation and the initial driver of solar eruptions. The agreement of the simulations with properties that are characteristic of many eruptions suggests that they are often triggered by the kink instability. The decrease of the overlying field with height is a main factor in deciding whether the instability leads to a confined event or to a CME.

https://iopscience.iop.org/article/10.1086/462412/pdf

Confined and Ejective Eruptions of Kink-unstable Flux Ropes

Solar Probe Plus (SPP) will be the first spacecraft to fly into the low solar corona. SPP’s main science goal is to determine the structure and dynamics of the Sun’s coronal magnetic field, understand how the solar corona and wind are heated and accelerated, and determine what processes accelerate energetic particles. Understanding these fundamental phenomena has been a top-priority science goal for over five decades, dating back to the 1958 Simpson Committee Report. The scale and concept of such a mission has been revised at intervals since that time, yet the core has always been a close encounter with the Sun. The mission design and the technology and engineering developments enable SPP to meet its science objectives to: (1) Trace the flow of energy that heats and accelerates the solar corona and solar wind; (2) Determine the structure and dynamics of the plasma and magnetic fields at the sources of the solar wind; and (3) Explore mechanisms that accelerate and transport energetic particles. The SPP mission was confirmed in March 2014 and is under development as a part of NASA’s Living with a Star (LWS) Program. SPP is scheduled for launch in mid-2018, and will perform 24 orbits over a 7-year nominal mission duration. Seven Venus gravity assists gradually reduce SPP’s perihelion from 35 solar radii (
 $R_{S}$
 ) for the first orbit to ${<}10~R_{S}$
 for the final three orbits. In this paper we present the science, mission concept and the baseline vehicle for SPP, and examine how the mission will address the key science questions

/pdf/the-solar-probe-plus-mission-humanity-s-first-visit-to-our-e2fb5pur3z.pdf

The Solar Probe Plus Mission: Humanity’s First Visit to Our Star

[1] Ensemble modeling is a method of prediction based on the use of a representative sample of possible future states. Global models of the solar corona and inner heliosphere are now maturing to the point of becoming predictive tools; thus, it is both meaningful and necessary to quantitatively assess their uncertainty and limitations. In this study, we apply simple ensemble modeling techniques as a first step towards these goals. We focus on one relatively quiescent time period, Carrington rotation 2062, which occurred during the late declining phase of solar cycle 23. To illustrate and assess the sensitivity of the model results to variations in boundary conditions, we compute solutions using synoptic magnetograms from seven solar observatories. Model sensitivity is explored using (1) different combinations of models, (2) perturbations in the base coronal temperature (a free parameter in one of the model approximations), and (3) the spatial resolution of the numerical grid. We present variance maps, “whisker” plots, and “Taylor” diagrams to summarize the accuracy of the solutions and compute skill scores, which demonstrate that the ensemble mean solution outperforms any of the individual realizations. Our results provide a baseline against which future model improvements can be compared.

https://agupubs.onlinelibrary.wiley.com/doi/pdf/10.1002/jgra.50156

On the application of ensemble modeling techniques to improve ambient solar wind models

A general method for describing magnetic reconnection in arbitrary three-dimensional magnetic configurations is proposed. The method is based on the field-line mapping technique previously used only for the analysis of a magnetic structure at a given time. This technique is extended here so as to analyze the evolution of a magnetic structure. Such a generalization is made with the help of new dimensionless quantities called “slipsquashing factors.” Their large values define the surfaces that border the reconnected or to-be-reconnected magnetic flux tubes for a given period of time during the magnetic evolution. The proposed method is universal, since it assumes only that the time sequence of evolving magnetic field and the tangential boundary flows are known. The application of the method is illustrated for simple examples, one of which was considered previously by Hesse and coworkers in the framework of the general magnetic reconnection theory. The examples help us to compare these two approaches; it reveals also that, just as for magnetic null points, hyperbolic and cusp minimum points of a magnetic field serve as favorable sites for magnetic reconnection. The new method admits a straightforward numerical implementation and provides a powerful tool for the diagnostics of magnetic reconnection in numerical models of solar-flare-like phenomena in space and laboratory plasmas.

Slip-Squashing Factors as a Measure of Three-Dimensional Magnetic Reconnection

Two-site observations of interplanetary scintillation using the EISCAT facility can provide measurements of solar wind velocity at any point in the heliosphere between 15 and 120 solar radii (R). In this paper we discuss a series of observations made as part of the Whole Sun Month campaign (August 10 to September 8, 1996) and compare the results with coronal data and in-situ measurements made during the campaign. The results of the comparison revealed extremely good agreement between solar wind speeds measured by IPS at 16-73 R and in situ measurements at 213 R and beyond, both in the general morphology of the solar wind and in the absolute velocities observed. These results confirm that structures in the solar wind, originating in the corona, preserve their form out to 910 R or more. Observations of fast solar wind were always associated with coronal holes and slow wind with the bright corona. Velocities intermediate between normal fast and slow flow speeds are associated with interaction regions between fast and slow flow and are also found above the boundaries of coronal holes.

https://agupubs.onlinelibrary.wiley.com/doi/pdf/10.1029/1998JA900091

Interplanetary scintillation measurements of the solar wind during Whole Sun Month: Comparisons with coronal and in situ observations

The helmet streamers that are observed to dominate the structure of the inner corona are formed by the interaction of the solar wind with coronal magnetic fields. We have simulated this interaction in three dimensions using the magnetohydrodynamic (MHD) equations. In order to create a realistic model, we use the magnetic field that is observed at the Sun’s surface (deduced from daily Wilcox Solar Observatory magnetic field synoptic maps) as input, in combination with specified density and temperature profiles at the surface. A self-consistent 3D solar-wind solution is developed by integrating the MHD equations in time to steady state. Such solutions can reproduce the observed structures that are seen in coronagraph images and eclipse photographs of the corona. We compare the results obtained from our model with with an eclipse photograph of the corona on November 3, 1994. We also compare the position of the heliospheric current sheet with Ulysses observations during the period May–June 1993.

The large-scale structure of the solar corona and inner heliosphere

NASA's Parker Solar Probe (Parker) spacecraft reached its first perihelion of 35.7 solar radii on November 5th, 2018. To aid in mission planning, and in anticipation of the unprecedented measurements to be returned, in late October, we developed a three-dimensional magnetohydrodynamic (MHD) solution for the solar corona and inner heliosphere, driven by the then available observations of the Sun's photospheric magnetic field. Our model incorporates a wave-turbulence-driven (WTD) model to heat the corona. Here, we present our predictions for the structure of the solar corona and the likely {\it in situ} measurements that Parker will be returning over the next few months. We infer that, in the days prior to 1st Encounter, Parker was immersed in wind emanating from a positive-polarity equatorial coronal hole. During the encounter, however, field lines from the spacecraft mapped to another, negative-polarity equatorial coronal hole. Following the encounter, Parker was magnetically connected to the large, positive-polarity northern polar coronal hole. When the Parker data become available, these model results can be used to assist in their calibration and interpretation, and, additionally, provide a global context for interpreting the localized {\it in situ} measurements. In particular, we can identify what types of solar wind Parker encountered, what the underlying magnetic structure was, and how complexities in the orbital trajectory can be interpreted within a global, inertial frame. Ultimately, the measurements returned by Parker can be used to constrain current theories for heating the solar corona and accelerating the solar wind.

Zoran Mikic

Papers

On the application of ensemble modeling techniques to improve ambient solar wind models

Slip-Squashing Factors as a Measure of Three-Dimensional Magnetic Reconnection

Interplanetary scintillation measurements of the solar wind during Whole Sun Month: Comparisons with coronal and in situ observations

The large-scale structure of the solar corona and inner heliosphere

Predicting the Structure of the Solar Corona and Inner Heliosphere during Parker Solar Probe's First Perihelion Pass