Showing papers in "International Journal of Adhesion and Adhesives in 2022"

TL;DR: In this article, the authors review the production processes of bio-based adhesives from different bio-resources, their necessary modification for improving properties and their utilization in the wood-based industries.

TL;DR: In this article , four different sequential laminates of Jute (J) and Hemp (H) fibers reinforced hybrid bio-epoxy composites were developed by using the hand lay-up method.

TL;DR: In this article, four different sequential laminates of Jute (J) and Hemp (H) fibers reinforced hybrid bio-epoxy composites were developed by using the hand lay-up method.

TL;DR: In this paper , the authors review the production processes of bio-based adhesives from different bio-resources, their necessary modification for improving properties and their utilization in the wood-based industries.

TL;DR: In this article, the thermal properties of chitosan adhesives were analyzed by differential scanning calorimetry (DSC) and thermomechanical analysis (TMA) using Fourier transform infrared (FTIR) and matrix assisted laser desorption ionization time-of-flight (MALDI-TOF) mass spectrometry.

TL;DR: In this article, a bio-sourced glycerol diglycidyl ether (GDE) was used in appropriate proportions as an enhancer to decrease the curing temperature, and improve the bonding performance, while reducing the emission of harmful substances, such as hexamethylenediamine, in the preparation process of tannin-based NIPU adhesives.

TL;DR: In this paper , a bio-sourced glycerol diglycidyl ether (GDE) was used in appropriate proportions as an enhancer to decrease the curing temperature, and improve the bonding performance, while reducing the emission of harmful substances, such as hexamethylenediamine, in the preparation process of tannin-based NIPU adhesives.

TL;DR: In this paper , the thermal properties of chitosan adhesives were analyzed by differential scanning calorimetry (DSC) and thermomechanical analysis (TMA) using Fourier transform infrared (FTIR) and matrix assisted laser desorption ionization time-of-flight (MALDI-TOF) mass spectrometry.

TL;DR: In this article , the benefits of bi-adhesive joints and their manufacturing challenges are reviewed and the effects of the aforementioned variables and their interactions on the mechanical properties of Bi-Adhesive joints are described.

TL;DR: In this paper , a polyurethane adhesive by using carbon nanotubes (CNT) to enhance the low-velocity impact behavior of aluminum honeycomb sandwich composite structures was investigated.

TL;DR: In this paper , the authors systematically analyzed the effect of temperature on the performance of composite single lap joints (SLJ) under various isothermal conditions from room temperature to 150 °C.

TL;DR: In this paper, a polyurethane adhesive by using carbon nanotubes (CNT) to enhance the low-velocity impact behavior of aluminum honeycomb sandwich composite structures was investigated.

TL;DR: In this paper , the effects of hexagonal boron nitride (h-BN) and h-B4C nanoparticles on the epoxy composites and single lap joints against hydrothermal ageing and resultant degradations of mechanical, thermal and structural properties were investigated.

TL;DR: In this paper , the effect of low-concentration (4 wt%) alkali and bleaching pre-treatments on the fibrillation of oil palm empty fruit bunch (OPEFB) fibers were evaluated.

TL;DR: In this article , the physicochemical properties of the synthesized resins (such as gel time, viscosity, solid content and density) and physical properties (flexural properties, internal bond strength) of the prepared particleboard panels bonded with LPF resins were measured.

TL;DR: In this article , a critical review of recent progress to improve the target properties of UF resins such as mechanical properties, thermal and curing behavior, and formaldehyde emission in the presence of nanoparticles is presented.

TL;DR: A review of bio-based adhesives and their application in wood-based composite products is presented in this article , where various modifications, additives, cross-linkers and crosslinkers can significantly improve various properties.

TL;DR: In this article , the performance of welding and adhesively bonded joints, when used in a real structural component, was compared, and it was concluded that adhesive bonding could be a suitable replacement for welding in structural applications.

TL;DR: In this paper , a novel renewable class of pressure sensitive adhesives (PSAs) is proposed wherein the low T g monomer of commercially available PSAs (2-EHA)) is replaced with bio-sourced acrylated epoxidized linseed oil (AELO).

TL;DR: In this article , the effects of nanoparticle hybridization on the shear and flexural performance of single lap joints (SLJs) of glass fiber reinforced polymer (GFRP) substrates were explored.

TL;DR: In this article, the performance of welding and adhesively bonded joints, when used in a real structural component, was compared, and it was concluded that adhesive bonding could be a suitable replacement for welding in structural applications.

TL;DR: In this paper , the effect of the interlayer on the fracture toughness of co-cured steel-carbon fiber reinforced plastic (CFRP) hybrid composites was investigated, and both experimental and numerical results confirm the improvement of interfacial fracture toughness.

TL;DR: In this paper, a novel renewable class of pressure sensitive adhesives (PSAs) is proposed wherein the low Tg monomer of commercially available PSAs (2-EHA)) is replaced with bio-sourced acrylated epoxidized linseed oil (AELO).

TL;DR: In this paper, the effect of the interlayer on the fracture toughness of co-cured steel-carbon fiber reinforced plastic (CFRP) hybrid composites was investigated, and both experimental and numerical results confirm the improvement of interfacial fracture toughness.

TL;DR: In this paper , Suberin is depolymerized to a higher extent and thus there is a higher amount of monomeric SA, monosaccharides and polyphenolic compounds in the resulting adhesive, which positively affects the physico-mechanical properties of the obtained particleboards.

TL;DR: In this article, a contact angle measurement technique was used to determine the total surface free energy and its dispersive and polar components of SBA-15 mesoporous materials and added boron did not have a significant impact on the characteristic structure.

TL;DR: In this paper , the influence of silane-hydrolysate coupling agents on various parameters of the interfacial adhesion between bitumen and mineral aggregate by applying molecular dynamics simulations was investigated.

TL;DR: In this article, the influence of silane-hydrolysate coupling agents on various parameters of the interfacial adhesion between bitumen and mineral aggregate by applying molecular dynamics simulations was investigated.

TL;DR: In this article , a contact angle measurement technique was used to determine the total surface free energy and its dispersive and polar components of pure and boron-containing, SBA-15 mesoporous materials.

TL;DR: In this paper , the scavenger addition (sodium sulphite and sodium metabisulphite) does not affect adhesives performance and was evaluated for applications and performance tests like peel strength and heat resistance.