Showing papers in "Synthetic Metals in 2022"
••
TL;DR: In this article, a multifunctional composite that effectively combines the outstanding EMI shielding, electrical conductivity mechanical flexibility and magnetic properties of hybrid polymer nanocomposite systems for wearable electronics is presented.
21 citations
••
TL;DR: In this article , a multifunctional composite that effectively combines the outstanding EMI shielding, electrical conductivity mechanical flexibility and magnetic properties of hybrid polymer nanocomposite systems for wearable electronics is presented.
21 citations
••
TL;DR: In this article , bimetallic Ni,Zn-MOF is first synthesized onto Ni foam via a novel indirect cathodic electrodeposition method for the first time, where the fabricated Ni-Zn MOFs onto Ni foam was converted to corresponding bi-metal hydroxide@C/Ni foam through direct chemical treating with 6 M KOH solution.
18 citations
••
TL;DR: In this paper , a polypyrrole and aniline 2- sulfonic acid (CFt/PPy/ASA(0.03) composite was synthesized on carbon felt under acid conditions.
17 citations
••
TL;DR: In this article , a multifunctional Fe 3+ /Gd 3+ -CeO 2 @RGO (FGC@RGO) nanohybrid was synthesized via facile co-precipitation and ultra-sonication methods.
17 citations
••
TL;DR: In this article, the vanadium pentoxide-reduced graphene oxide (V2O5-rGO) nanocomposite was used as a photocatalyst for dye degradation under solar irradiation.
15 citations
••
TL;DR: In this article , the vanadium pentoxide-reduced graphene oxide (V2O5-rGO) nanocomposite was used as a photocatalyst for dye degradation under solar irradiation.
15 citations
••
TL;DR: In this paper , the stability, optical property and thermal conductivity of water-based mono, binary and ternary nanofluid using MWCNT, Al2O3 and ZnO nanoparticle were experimentally investigated.
15 citations
••
TL;DR: In this article , a novel type ternary GO/PANI/CuCo2O4 composite for electrode material was successfully synthesized and ensured by different characterizations such as XRD (X-ray diffraction), FTIR (Fourier transform infrared spectroscopy), FE-SEM (Field emission scanning electron microscopy), and EDS (Energy-dispersive X-ray spectroscope).
15 citations
••
TL;DR: In this paper , a new strategy for the fabrication of emerging MgCo2O4 @Ni3S2 heterostructure array for asymmetric supercapacitors through hydrothermal and subsequent calcination technique is reported.
13 citations
••
TL;DR: In this article , a graphite-like carbon nitride (GNT)/reduced graphene oxide (rGO) composite was synthesized using a hydrothermal approach and characterized it by powder X-ray diffraction, scanning electron microscopy, transmission electron microscope, energy-dispersive electron microscope and Xray photoelectron spectroscopy, which showed good selectivity, stability and excellent repeatability for H 2 O 2 detection.
••
TL;DR: In this paper , the authors explored co-precipitation and hydrothermal methods to synthesize Fe3O4/GO/g-C3N4 ternary composites and utilized them as photocatalyst materials for the degradation of naphthalene.
••
TL;DR: In this paper , facile hydrothermal synthesis of VO2 (D) and g-C3N4 composites by using vanadium pentoxide as a precursor and citric acid monohydrate as a reducing agent was reported.
••
TL;DR: In this paper , the effects of geometrical and physical properties of gyroidal graphene and porous silicon of the Cantor sequence terminated by a gyroid layer are studied for gas sensing applications.
••
TL;DR: In this article , a series of Z-shaped non-fullerene acceptors (NFAs) (SNAA1-SNAA6) were designed for the possible use of in efficient OSCs devices.
••
TL;DR: In this article , the nanofiber polyimine blend [1 H-Pyr+Ben] B thin films were fabricated from pyrrole-2,5-dicarbaldehyde and benzidine [Ben] by placing a glass substrate in front of the target of an electro spinner.
••
TL;DR: In this article, the PEDOT:PSS fiber was treated with different solvents to remove the insulative PSS chains and improve the conductivity of the fibers, achieving a power factor of 9.42μWm−1 K−2 with a slightly reduced Seebeck coefficient.
••
TL;DR: In this paper , the vibrational and electronic properties of tin selenide (SnSe) nanowires encapsulated in single walled carbon nanotubes (SWCNT) were investigated by combining experimental Raman spectroscopy and density functional theory calculations at the Heyd-Scuseria-Ernzerhof (HSE) level.
••
TL;DR: In this article , a modified polyethylene terephthalate (PET) fabric was applied to polypropylene terethylphthalate to achieve a higher antibacterial performance against S. aureus and E. coli.
••
TL;DR: In this paper , the PEDOT:PSS fiber was treated with different solvents to remove the insulative PSS chains and improve the conductivity of the fibers.
••
TL;DR: In this article , the additive effect of formamidinium iodine (FAI) and lanthanide compound into the perovskite layer for improving carrier diffusion and mobility in perovsite layer was investigated.
••
TL;DR: In this paper , a hybrid of Co9S8 and polypyrrole (PPy) was grown on carbon cloth (CC) for battery-type supercapacitor electrode.
••
TL;DR: In this paper , a review of the current knowledge on the performance of MoS2-based microwave absorption material (MAMs) is comprehensively concluded and analyzed, while the main issues and development difficulties are dissected.
••
TL;DR: In this paper , a simple, cost-effective, and environmentally friendly electrodeposition process has been employed for the deposition of graphene oxide/polypyrrole composite with nickel (Ni-GO-PPy) on mild steel.
••
TL;DR: In this article , the halloysite nanotubes/polypyrrole/Fe3O4 (HPF) nanocomposites were synthesized, and their microwave absorption properties were investigated.
••
TL;DR: In this paper , a dysprosium selenide (Dy2Se3) films were prepared using the simple successive ionic layer adsorption and reaction (SILAR) method and characterized using different physicochemical techniques.
••
TL;DR: In this article , triflic acid to PEDOT:PSS solution is employed displaying simultaneous increase in conductivity of 1686 S cm−1 and Seebeck coefficient of 23.6 µV K−1.
••
TL;DR: In this paper , a productive and straightforward strategy was developed to fabricate graphene based NiFe2O4 doped rare-earth (RE) ions nanocomposites for enhancing the magnetic and structural characteristics of ferrites.
••
TL;DR: In this paper , NiO nano-particles have been mixed with poly(3,4-ethylene-dioxythiophene):Poly(styrenesulphonate) (PEDOT:PSS) polymer have been extensively progressed, owing to its processability, flexibility and its low intrinsic thermal conductivity.
••
TL;DR: In this article , a Zinc metal-organic frameworks (Zn-MOF) and reduced graphene oxide (rGO) hybrid composites with attractive wrinkled nanosheet-like topographical electrodes are fabricated with various composites of rGO by hydrothermal technique.