Journal ArticleDOI
A study on the wear resistance of electroless Ni–P/Diamond composite coatings
Reads0
Chats0
TLDR
In this article, the effect of heat treatment, particle size and phosphorus content on the wear characteristics of composite electroless coating containing diamond particles was investigated and the results indicated substantial increase in wear resistance after the coated sample containing 9-10 wt% P content having fine diamond particle size is annealed around 350°C.About:
This article is published in Wear.The article was published on 2000-04-01. It has received 103 citations till now. The article focuses on the topics: Diamond & Electroless nickel.read more
Citations
More filters
Book ChapterDOI
Tribological Measurement of Electroless Nickel Coatings
TL;DR: A comprehensive overview of the tribological measurements and evaluation methods related to surface roughness and friction/wear characteristics of electroless nickel coatings can be found in this paper, where different tribological measurement techniques employed to evaluate the coatings and their response to the same are summarized.
Journal ArticleDOI
Effects of Properties on S45C Carbon Steel by Electroless NiP Adding Al2O3 Powder of Composite Deposition and Various Heat Treatments
TL;DR: In this article, the effects on the surface microstructure and mechanical properties of S45C carbon steel via electroless Ni-P, by adding αAl2O3 powder via composite deposition and various heat treatments.
Journal ArticleDOI
Electrodepositon and Properties of Ni-Diamond Composite Coatings
TL;DR: In this article, the crystal structure and surface morphology of Ni-diamond composite coatings were examined with X-ray diffraction (XRD) and scanning electron microscopy (SEM).
References
More filters
Journal ArticleDOI
The measurement of wear resistance
TL;DR: In this article, a discussion of several important aspects of evaluating wear resistance is presented, focusing on abrasion, which is a large area of the complex field of wear, and the merit of these several qualities should be checked by statistical mathematics to avoid erroneous conclusions and misplaced confidence.
Journal Article
Investigation of electroless Ni-P-SiC composite coatings
TL;DR: In this article, the formation of the Ni 3 Si compound and wear mechanism of the composite coatings are discussed and structural analysis confirms that a new phase of Ni 3Si compound exists in the Ni-P-SiC deposits annealed at 650 °C for 1 hr.
Journal Article
Structural Transformations in electroless Ni-P-B deposits
P. Sampath Kumar,P. Kesavan Nair +1 more
TL;DR: In this paper, a mixture of microcrystalline nickel and amorphous phases was observed to be a mixture based on X-ray diffraction and transmission electron microscopy.
Related Papers (5)
Electroless nickel, alloy, composite and nano coatings – A critical review
J. Sudagar,Jianshe Lian,Wei Sha +2 more