Journal ArticleDOI
Effect of working parameters on the surface integrity in cryogenic diamond burnishing of 17-4 PH stainless steel with a novel diamond burnishing tool
Reads0
Chats0
TLDR
In this paper, the effect of cryogenic diamond burnishing on surface integrity characteristics such as surface roughness, surface hardness, surface morphology, surface topography, subsurface microhardness, and residual stress of 17-4 pH stainless steel have been investigated with a novel diamond burning tool and also it has been related to dry and minimum quantity lubrication (MQL) environments respectively.About:
This article is published in Journal of Manufacturing Processes.The article was published on 2019-02-01. It has received 17 citations till now. The article focuses on the topics: Burnishing (metal) & Surface integrity.read more
Citations
More filters
Journal ArticleDOI
Roller burnishing of Ti6Al4V under different cooling/lubrication conditions and tool design: effects on surface integrity
TL;DR: In this paper, a deep experimental study on surface modifications induced by roller burnishing process of Ti6Al4V titanium alloy has been performed based on a design of experiments at varying lubrication/cooling strategies, roller geometry, coating, and burnishing speed.
Journal ArticleDOI
Selection of optimal process parameters in sustainable diamond burnishing of 17-4 PH stainless steel
TL;DR: In this paper, a correlation model between the process parameters and the output responses while burnishing of 17-4 precipitation hardenable stainless steel using response surface methodology has been developed to analyze the influence of process parameters on output responses in the MQL environment.
Journal ArticleDOI
Minimum Quantity Lubrication through the micro-hole textured PCD and PCBN inserts in the machining of the Ti–6Al–4V alloy
TL;DR: In this article, a comparison study has been performed with the new cutting tool inserts with surface modification such as Polycrystalline Cubic Boron Nitride (PCBN) and PolyCrystalstalline Diamond (PCD) inserts for high-speed machining of Ti-6Al-4V alloy.
Journal ArticleDOI
Application of Desirability Approach to Optimize the Control Factors in Cryogenic Diamond Burnishing
TL;DR: In this article, an experimental study on the diamond burnishing of 17-4 precipitation hardenable stainless steel in a cryogenic cooling condition has been presented and modeled for the output responses explicitly surface hardness and surface roughness.
Journal ArticleDOI
Enhancement of surface integrity by cryogenic diamond burnishing toward the improved functional performance of the components
TL;DR: In this article, the impact of diamond burnishing control factors on subsurface microhardness, surface roughness and surface morphology has been analyzed for 17-4 precipitation-hardenable (PH) stainless steel.
References
More filters
Journal ArticleDOI
Cryogenic manufacturing processes
I.S. Jawahir,Helmi Attia,Dirk Biermann,Joost Duflou,Fritz Klocke,Daniel Meyer,Stephen T. Newman,Franci Pušavec,Matthias Putz,Joël Rech,Volker Schulze,Domenico Umbrello +11 more
TL;DR: An overview of major cryogenic manufacturing processes, summarizing the state-of-the-art and significant developments during the last few decades, is presented in this article, with a summary of historic perspectives, including definitions, scope, and analysis of process mechanics and material performance covering tribological and thermo-mechanical interactions.
Journal ArticleDOI
Grain refined and basal textured surface produced by burnishing for improved corrosion performance of AZ31B Mg alloy
Z. Pu,Guang-Ling Song,S. Yang,José Outeiro,José Outeiro,Oscar W. Dillon,David A. Puleo,I.S. Jawahir +7 more
TL;DR: Grain refinement and strong basal texture were produced on AZ31B Mg alloy surface concomitantly by a newly developed severe plastic deformation (SPD) process, severe plasticity burnishing (SPB), which was attributed mainly to dramatically reduced grain size and strongly basal-textured grain orientation.
Journal ArticleDOI
The effects of ball- and roller-burnishing on the surface roughness and hardness of some non-ferrous metals
TL;DR: In this article, simple ball-and roller-burnishing tools were used for the experimental work of the present study, these tools being quite similar in their design principles, and the performance of the tools, together with the effects of the burnishing force and the number of burnishing tool passes on the surface roughness and surface hardness of commercially available aluminum and brass, were studied.
Journal ArticleDOI
Influence of hardness on the wear resistance of 17-4 PH stainless steel evaluated by the pin-on-disc testing
TL;DR: In this article, the wear resistance of AISI 630 (UNS S17400) or 17-4 PH stainless steel hardened by precipitation hardening or aging at various hardness levels was investigated.
Journal ArticleDOI
Taguchi S/N based optimization of machining parameters for surface roughness, tool wear and material removal rate in hard turning under MQL cutting condition
Mozammel Mia,Prithbey Raj Dey,Mohammad Shawkat Hossain,T. Arafat,Asaduzzaman,Md. Shoriat Ullah,S.M. Tareq Zobaer +6 more
TL;DR: In this paper, the authors presented the study of roughness parameters (Ra, Rq, Rz), tool wear parameters (VB, VS) and material removal rate (MRR) in MQL-assisted hard turning by using coated cemented carbide tool.
Related Papers (5)
Machinability studies on 17-4 PH stainless steel under cryogenic cooling environment
P. Sivaiah,D. Chakradhar +1 more