scispace - formally typeset
Journal ArticleDOI

EIS and XPS studies on the self-healing properties of Ce-modified silica-alumina hybrid coatings: Evidence for Ce(III) migration

TLDR
In this paper, the self-healing property of the coating is investigated experimentally by electrochemical impedance spectroscopy and exfoliation test, and the results confirm that coatings containing 0.005 M cerium nitrate inhibitor offers superior protection to the surface.
Abstract
Cerium nitrate added silica-alumina hybrid sol-gel coatings have been explored for the corrosion protection of AA2024-T3. The self-healing property of the coating is investigated experimentally by electrochemical impedance spectroscopy and exfoliation test. The results confirm that coatings containing 0.005 M cerium nitrate inhibitor offers superior protection to the surface. Increase in the surface concentration of Ce species in the corrosion tested coating, as evaluated from X-ray photoelectron spectroscopy (XPS) studies, provides a strong evidence for the outward migration of cerium ions from the coating. Improved corrosion protection observed is attributed to the combined effect of the stable barrier nature of the coating and the corrosion inhibiting nature of Ce3 + ions.

read more

Citations
More filters
Journal ArticleDOI

A stearic Acid/CeO2 bilayer coating on AZ31B magnesium alloy with superhydrophobic and self-cleaning properties for corrosion inhibition

TL;DR: In this paper, a stearic acid/CeO2 bilayer coating was prepared on AZ31B Mg by a simple electrodeposition method combined with immersion in Stearic Acid solution.
Journal ArticleDOI

Effective corrosion protection by eco-friendly self-healing PMMA-cerium oxide coatings

TL;DR: In this paper, an organic-inorganic hybrid consisting of poly(methyl methacrylate) (PMMA) covalently bonded to CeO2/Ce2O3 nanoparticles have been synthetized by the sol-gel process.
Journal ArticleDOI

Carbon dots as effective corrosion inhibitor for 5052 aluminium alloy in 0.1 M HCl solution

TL;DR: In this paper, N and S co-doped carbon dots (N, S-CDs) were used as corrosion inhibitors for aluminium alloy and the inhibition performance reached 85% even at 5 mg/L−1.
Journal ArticleDOI

Self-healing performance and corrosion resistance of phytic acid/cerium composite coating on microarc-oxidized magnesium alloy

TL;DR: A facile and green approach to prepare phytic acid/cerium composite coating (PA/Ce) with self-healing ability on microarc-oxidized magnesium alloy by hydrothermal treatment was reported in this paper.
Journal ArticleDOI

Corrosion resistance of phytic acid / Ce (III) nanocomposite coating with superhydrophobicity on magnesium

TL;DR: By alternative immersion into the aqueous solutions of phytic acid (PA) and CeCl3 for n cycles, a nanocomposite coating coded as (PA/Ce)n was fabricated on the magnesium substrate as mentioned in this paper.
References
More filters
Journal ArticleDOI

Nanostructured sol-gel coatings doped with cerium nitrate as pre-treatments for AA2024-T3 Corrosion protection performance

TL;DR: In this paper, a nanostructured hybrid sol-gel coatings doped with cerium ions were investigated as pre-treatments for the AA2024-T3 alloy.
Journal ArticleDOI

Electrochemical assessment of the self-healing properties of Ce-doped silane solutions for the pre-treatment of galvanised steel substrates

TL;DR: In this article, the electrochemical behavior of galvanized steel (GS) substrates pre-treated with bis-triethoxysilylpropyl tetrasulfide silane (BTESPT) doped with cerium nitrate was evaluated by electrochemical impedance spectroscopy (EIS) and by the scanning vibrating electrode technique (SVET).
Journal ArticleDOI

Corrosion protection of AA 2024-T3 by bis-[3-(triethoxysilyl)propyl]tetrasulfide in neutral sodium chloride solution. Part 1: corrosion of AA 2024-T3

TL;DR: In this article, the corrosion of 2024-T3 aluminum alloy was studied using scanning electron microscopy and energy-dispersive X-ray spectroscopy, and the results showed that the anodic S phase (Al2CuMg) particles dealloyed Al and Mg during the 3.5 h of immersion in a neutral 0.6 M sodium chloride (NaCl) solution.
Journal ArticleDOI

A room temperature cured sol–gel anticorrosion pre-treatment for Al 2024-T3 alloys

TL;DR: In this article, a hybrid epoxy-silica-alumina coating with or without doped cerium nitrate has been prepared using a sol-gel method, which exhibited excellent anticorrosion properties providing an adherent protection film on the Al 2024-T3 substrate.
Journal ArticleDOI

The use of pre-treatments based on doped silane solutions for improved corrosion resistance of galvanised steel substrates

TL;DR: In this paper, the authors evaluated the corrosion resistance of galvanised steel substrates pre-treated with bis-triethoxysilylpropyl tetrasulfide silane doped with cerium nitrate or zirconium nitrates.
Related Papers (5)