Patent
Electric arc welding
TLDR
In this article, the high-frequency inductor or transformer disposed in the welding circuit and necessary for the injection of the highfrequency current has a core of ferrite material or powdered iron and is arranged to saturate at normal welding currents so as to offer little impedance to the flow of welding current.Abstract:
722,494. Supply systems for welding arcs. AIR REDUCTION CO., Inc. Dec. 8, 1952 [Dec. 28, 1951], No. 31074/52. Drawings to Specification. Class 38 (4). To permit the employment of a relatively low high-frequency (say 50 to 500 kcs. per sec.) current for starting and stabilizing a D.C. or low-frequency A.C. welding arc, the highfrequency inductor or transformer disposed in the welding circuit and necessary for the injection of the high-frequency current has a core of ferrite material or powdered iron and is arranged to saturate at normal welding currents so as to offer little impedance to the flow of welding current, but to be unsaturated by the high-frequency currents alone, so as to offer high impedance to these-and thus provide good injection of high-frequency currentwhen the arc extinguishes. The high-frequency generator may comprise a push-pull valve oscillator normally cut off by external bias, but triggered into oscillation by a voltage pulse induced in a winding of the injection transformer upon interruption of the flow of welding current.read more
Citations
More filters
Patent
Arc welding capable of multi-mode welding
TL;DR: An electric welding control circuit incorporates a mode selection switch to enable the welder to be used in a selected one of several operational modes, such as a rod welder, a MIG, a TIG or a spot/stitch welder as discussed by the authors.
Patent
TIG welding system and method
TL;DR: In this article, a welding arrangement designed to respond the need of an improved welding system that aids in supplying filler material to a weld location is presented, where a welding system including a welding gun (18) and a welding wire feed (94) directly coupled to the welding gun.
References
More filters
Patent
Separation of the constituents of gaseous mixtures
TL;DR: In this article, a method for the liquefaction and separation of ternary gaseous mixtures for the purpose of recovering the constituents of air is described, particularly adapted for the separation of the principal constituents.
Patent
Arc welding apparatus
TL;DR: In this article, it was shown that it is desirable to avoid the inclusion of oxides and nitrides in the weld metal, since their inclusion causes hardness and brittleness and further degradation.