Patent
Electric arc welding
TLDR
In this article, the high-frequency inductor or transformer disposed in the welding circuit and necessary for the injection of the highfrequency current has a core of ferrite material or powdered iron and is arranged to saturate at normal welding currents so as to offer little impedance to the flow of welding current.Abstract:
722,494. Supply systems for welding arcs. AIR REDUCTION CO., Inc. Dec. 8, 1952 [Dec. 28, 1951], No. 31074/52. Drawings to Specification. Class 38 (4). To permit the employment of a relatively low high-frequency (say 50 to 500 kcs. per sec.) current for starting and stabilizing a D.C. or low-frequency A.C. welding arc, the highfrequency inductor or transformer disposed in the welding circuit and necessary for the injection of the high-frequency current has a core of ferrite material or powdered iron and is arranged to saturate at normal welding currents so as to offer little impedance to the flow of welding current, but to be unsaturated by the high-frequency currents alone, so as to offer high impedance to these-and thus provide good injection of high-frequency currentwhen the arc extinguishes. The high-frequency generator may comprise a push-pull valve oscillator normally cut off by external bias, but triggered into oscillation by a voltage pulse induced in a winding of the injection transformer upon interruption of the flow of welding current.read more
Citations
More filters
Patent
Method and system for rapidly welding rebar sections using gas metal arc welding
TL;DR: In this paper, a self-stabilizing fusion rebar welding process is proposed for rebar panel construction by using assembly systems on mobilized trailers or at stationary locations, and the welded panels allow positioning of large rebar configurations, insuring that the spacing of the individual bars exceeds all required tolerances.
Patent
Applicating assembly for weld material and method of applying weld material
TL;DR: In this article, a dispensing assembly dispenses a colloidal mixture onto a part at a weld position, including a supply reservoir for holding the mixture and an inline mixer in fluid communication with the supply reservoir.
References
More filters
Patent
Separation of the constituents of gaseous mixtures
TL;DR: In this article, a method for the liquefaction and separation of ternary gaseous mixtures for the purpose of recovering the constituents of air is described, particularly adapted for the separation of the principal constituents.
Patent
Arc welding apparatus
TL;DR: In this article, it was shown that it is desirable to avoid the inclusion of oxides and nitrides in the weld metal, since their inclusion causes hardness and brittleness and further degradation.