Open Access
Gsm based gas leakage detection system
TLDR
The aim of this paper is to present a design that can automatically detect and stop gas leakage in vulnerable premises and provide the design approach on both software and hardware.Abstract:
Gas leakage is a major problem with industrial sector, residential premises and gas powered vehicles like CNG (compressed natural gas) buses, cars. One of the preventive methods to stop accident associated with the gas leakage is to install gas leakage detection kit at vulnerable places. The aim of this paper is to present such a design that can automatically detect and stop gas leakage in vulnerable premises. In particular gas sensor has been used which has high sensitivity for propane (C3H8) and butane (C4H10). Gas leakage system consists of GSM (Global System for mobile communications) module, which warns by sending SMS. However, the former gas leakage system cannot react in time. This paper provides the design approach on both software and hardware.read more
Citations
More filters
Journal ArticleDOI
A comprehensive system for detection of flammable and toxic gases using IoT
Bahaa Kareem Mohammed,Manar Bashar Mortatha,Ahmad Shaker Abdalrada,Haider Th. Salim ALRikabi +3 more
TL;DR: In this article, a system is proposed for detecting different kinds of flammable and toxic gases, such as smoke, ethanol, CNG gas, Methane, toluene, propane, Carbon Monoxide, acetone, Hydrogen Gas, and Formaldehyde.
Proceedings ArticleDOI
Sensor-Based Gas Leakage Detector System
TL;DR: The aim of this paper is to propose and discuss a design of a gas leakage detection system that can automatically detect, alert and control gas leakage, which also includes an alerting system for the users.
Journal Article
Hazardous Gas Detection using Arduino
TL;DR: The primary aim of the work is to design arduino based hazardous gas detecting system using gas sensors, where toxic gases like butane, methane and carbon monoxide are sensed and displayed on the LCD display.
Proceedings ArticleDOI
A Crowd Simulation Based UAV Control Architecture for Industrial Disaster Evacuation
TL;DR: A crowd simulation based UAV control system to direct crowd evacuation from the polluted area and shows that the proposed architecture can provide efficient way to help pedestrian in the environment to evacuate and avoid to be infected by the toxic gas.
Proceedings ArticleDOI
Gas Leakage and Fire Detection using Raspberry Pi
TL;DR: The growth in the industrial monitoring system’s design using Internet of Things (IoT) is presented, using MQ-2 which detects the leakage of gas at any atmos pheric condition and fire sensor as a simple and compact device for protection against fire.
References
More filters
Journal ArticleDOI
A New Type of Motor: Pneumatic Step Motor
TL;DR: The motor was designed to be compatible with magnetic resonance medical imaging equipment, for actuating an image-guided intervention robot, for medical applications, and is readily applicable to other pneumatic or hydraulic precision-motion applications.
Proceedings Article
Automatic power meter reading system using GSM network
H.G.R. Tan,C.H.R. Lee,V. H. Mok +2 more
TL;DR: The development of a GSM automatic power meter reading (GAPMR) system is presented in this paper to demonstrate the effectiveness and efficiency of automatic meter reading, billing and notification through the use of GSM network.
Journal ArticleDOI
High-speed parameter estimation of stepper motors
TL;DR: A batch least-squares algorithm is used to identify the parameters of a permanent magnet stepper motor and can be used to develop models of stepper motors for precise control and to automatically tune computer-controlled drives.
Journal ArticleDOI
Novel Modeling and Damping Technique for Hybrid Stepper Motor
TL;DR: A novel approach is proposed to model the behavior of a commercial 1.8deg hybrid stepper motor accurately and efficiently and model-based damping algorithms for both open-loop control and servo control are proposed.
Embedded system for Hazardous Gas detection and Alerting
TL;DR: The main objective of the work is designing microcontroller based toxic gas detecting and alerting system that offers quick response time and accurate detection of an emergency and in turn leading faster diffusion of the critical situation.