Journal ArticleDOI
Influence of micro scale textured tools on tribological properties at tool-chip interface in turning AISI 316 austenitic stainless steel
D. Vasumathy,Anil Meena +1 more
Reads0
Chats0
TLDR
In this paper, the effect of different lay directions of the texture with respect to the chip flow was studied, and the cutting performance of the textured carbide tools while turning AISI 316 austenitic stainless steel.About:
This article is published in Wear.The article was published on 2017-04-15. It has received 57 citations till now. The article focuses on the topics: Tool wear & Machining.read more
Citations
More filters
Journal ArticleDOI
Role of textured tool in improving machining performance: A review
TL;DR: An extensive literature survey on textured cutting tools in machining processes is presented in this paper, which includes different techniques used in creating these textures on cutting tool, experimental setups, the mechanism how textured tool is performing better than conventional tool, different modelling and simulation techniques used and the effect of these texture on improvement in surface finish, reducing cutting forces, tool wear, friction and cutting temperature.
Journal ArticleDOI
Cutting performance of textured polycrystalline diamond tools with composite lyophilic/lyophobic wettabilities
TL;DR: In this paper, a new technology was developed to improve the anti-friction performance of cutting tools by constructing textured surface with composite lyophilic/lyophobic wettabilities and applied to polycrystalline diamond (PCD) tools.
Journal ArticleDOI
Study on the surface quality of CFRP machined by micro-textured milling tools
TL;DR: In this article, two kinds of surface structures were fabricated on the rake face of the carbide double-edge milling tool: (1) linear grooves parallel to the main cutting edge (named PAM); (2) linear girders perpendicular to the machined edge (called PEM), and the results showed that the surface quality of machined by the micro-textured milling tools is improved over that by the conventional one.
Journal ArticleDOI
The coupling effect of micro-groove textures and nanofluids on cutting performance of uncoated cemented carbide tools in milling Ti-6Al-4V
TL;DR: In this article, the rake face of uncoated cutting tool was textured with micro-groove parallel to the main cutting edge by YAG laser (named TP), and cutting tools without laser surface texturing (named NT) were also employed for comparison.
Journal ArticleDOI
Effect of WEDM surface texturing on Al2O3/TiCN composite ceramic tools in dry cutting of hardened steel
TL;DR: In this paper, micro scale textures were fabricated on the rake surface of Al2O3/TiCN composite ceramic cutting tools using WEDM process and the performance of cutting tools was evaluated by chip-tool contact length, tool wear, machining forces, cutting temperature, frictional coefficient and chip morphology.
References
More filters
Journal ArticleDOI
Performance of carbide tools with textured rake-face filled with solid lubricants in dry cutting processes
TL;DR: In this paper, surface texturing with different geometrical characteristics was made on the rake face of the WC/Co carbide tools, molybdenum disulfide (MoS 2 ) solid lubricants were filled into the textured rake-face.
Journal ArticleDOI
Study on micro texturing of uncoated cemented carbide cutting tools for wear improvement and built-up edge stabilisation
Johannes Kümmel,Daniel Braun,Jens Gibmeier,Johannes Schneider,Christian Greiner,Volker Schulze,Alexander Wanner +6 more
TL;DR: In this paper, laser surface texturing was applied to texture the rake face of the cutting tool with different textures (dimples and channels) to allow for changing the adhesion tendency of built-up edge (BUE) structures.
Journal ArticleDOI
Effect of laser surface texturing on Si3N4/TiC ceramic sliding against steel under dry friction
TL;DR: In this article, the effect of surface texturing on the stress distribution was studied by finite element method (FEM), and the results showed that the textured surfaces exhibited lower friction coefficient and excellent anti-wear properties compared with smooth surfaces.
Journal ArticleDOI
Cutting performance and wear mechanism of nanoscale and microscale textured Al2O3/TiC ceramic tools in dry cutting of hardened steel
TL;DR: In this paper, the effect of the textures on the cutting performance was investigated using the textured self-lubricated tools and conventional tools in dry cutting tests, and the tool wear, cutting force, cutting temperature, friction coefficient, surface roughness and chip topography were measured.
Journal ArticleDOI
Effect of micro-textured tools on machining of Ti–6Al–4V alloy: An experimental and numerical approach
TL;DR: In this article, an attempt is made to reduce the detrimental effects that occurred during machining of Ti-6Al-4V by employing surface textures on the rake faces of the cutting tools.