Journal ArticleDOI
Polymer modified mortars
C. Perényi
- Vol. 1, Iss: 1, pp 13-21
TLDR
Aqueous polymer dispersions have been used to modify concrete and mortar properties as mentioned in this paper, and some research work has been made to find the optimum type and proportion of polymer dispersion admixture.Abstract:
Aqueous polymer dispersions admixed to cement concretes or mortars affect their properties. Some research work has been made to find the optimum type and proportion of polymer dispersion admixture, and to see how concrete and mortar properties are thereby modified.read more
Citations
More filters
Journal ArticleDOI
Fibre reinforcement of cement and concrete
TL;DR: The RILEM International Symposium on Fibre Cement Composites as mentioned in this paper was held in London from 17-17 September, 1975, with an emphasis on the development and practical use of fiber-reinforced cement composites.
Journal ArticleDOI
The influence of moisture on the deformability of cement–polymer adhesive mortar
TL;DR: In this article, the influence of moisture content on the flexibility of six adhesive mortars is investigated, based on standard EN 12002, and the results show that moisture content above 6% is sufficient to reduce 50% of the mortar deformability, but that the drying process allows it to recover to a value similar to that prior to saturation.
Journal ArticleDOI
Experimental investigations on polymer-modified concrete subjected to elevated temperatures
A. Muthadhi,S. Kothandaraman +1 more
TL;DR: In this article, the effect of elevated temperature and duration of exposures on polymer-modified concrete (PMC) was investigated and it was found that PMC and conventional concrete can be exposed to 400 °C for 3 h exposure without any adverse effect on strength properties.
Journal ArticleDOI
Review and discussion of polymer action on alkali–silica reaction
TL;DR: In this paper, the authors compared the factors known to influence the deleterious alkali-silica reaction in concrete with the properties that polymers tend to modify in cementitious materials.
Journal ArticleDOI
The Bond Strength Behavior of Polymer-modified Mortars During a Wetting and Drying Process
Flávio Leal Maranhão,Flávio Leal Maranhão,Maurício M. Resende,Vanderley Moacyr John,Mercia Maria Semensato Bottura de Barros +4 more
TL;DR: In this article, the influence of water saturation on polymer modified mortar is well documented and the influence that progressive water intake on bond strength by applying pull out tests on several different mortars was investigated.
References
More filters
Journal ArticleDOI
Improved Portland Cement Mortars with Polyvinyl Acetate Emulsions
Journal ArticleDOI
Polyvinyl Acetate and Portland Cement Mortars
TL;DR: In this article, the use of polyvinyl acetate and its use in concrete floor surfacing materials is discussed. But, it is not suitable for continuous exposure to water and it shows cracks when applied in thicknesses over 1/2 in.
Related Papers (5)
Properties of Polymer Modified Mortars Using Re-dispersible Polymer Powders
Sang-Chan Bae,Won-Gil Hyung +1 more