scispace - formally typeset
Open AccessJournal ArticleDOI

Stress corrosion cracking of gas pipeline steels of different strength

TLDR
In this article, the degradation of low-carbon pipeline steels with different strength levels from the point of view of their susceptibility to stress corrosion cracking in the as-received state and after in-laboratory accelerated degradation under environmental conditions similar to those of an acidic soil were investigated.
Abstract
With the development of the natural gas industry, gas transmission pipelines have been developed rapidly in terms of safety, economy and efficiency. Our recent studies have shown that an important factor of main pipelines serviceability loss under their long-term service is the in-bulk metal degradation of the pipe wall. This leads to the loss of the initial mechanical properties, primarily, resistance to brittle fracture, which were set in engineering calculations at the pipeline design stage. At the same time stress corrosion cracking has been identified as one of the predominant failures in pipeline steels in humid environments, which causes rupture of high-pressure gas transmission pipes as well as serious economic losses and disasters. In the present work the low-carbon pipeline steels with different strength levels from the point of view of their susceptibility to stress corrosion cracking in the as-received state and after in-laboratory accelerated degradation under environmental conditions similar to those of an acidic soil were investigated. The main objectives of this study were to determine whether the development of higher strength materials led to greater susceptibility to stress corrosion cracking and whether degraded pipeline steels became more susceptible to stress corrosion cracking than in the as-received state. The procedure of accelerated degradation of pipeline steels was developed and introduced in laboratory under the combined action of axial loading and hydrogen charging. It proved to be reliable and useful to performed laboratory simulation of in-service degradation of pipeline steels with different strength. The in-laboratory degraded 17H1S and X60 pipeline steels tested in the NS4 solution saturated with CO 2 under open circuit potential revealed the susceptibility to stress corrosion cracking, reflected in the degradation of mechanical properties, and at the same time the degraded X60 steel showed higher resistance to stress corrosion cracking than the degraded 17H1S steel. Fractographic observation confirmed the pipeline steels hydrogen embrittlement caused by the permeated hydrogen.

read more

Citations
More filters
Journal ArticleDOI

External corrosion of oil and gas pipelines: A review of failure mechanisms and predictive preventions

TL;DR: In this paper , the authors present an updated review of the external corrosion and failure mechanisms of buried natural gas and oil pipelines, including hydrogen-induced cracking (HIC), hydrogen embrittlement (HE), corrosion fatigue (CF), stress corrosion cracking (SCC), and microbiologically influenced corrosion (MIC) for oil and gas pipelines.
Journal ArticleDOI

Effect of sulfate-reducing bacteria and cathodic potential on stress corrosion cracking of X70 steel in sea-mud simulated solution

TL;DR: In this paper, the single and combined effect of sulfate-reducing bacteria (SRB) and cathodic potential on stress corrosion cracking (SCC) behavior of X70 pipeline steel in sea-mud simulated solution was investigated by slow strain rate tests and fractographic observation.
Journal ArticleDOI

Field experiment of stress corrosion cracking behavior of high strength pipeline steels in typical soil environments

TL;DR: In this article, the authors investigated the corrosion behaviors of four pipeline steels, i.e., X70, X80, X100, and X120, in acidic soil, alkaline soil, and dry sandy soil (Lhasa) in China by exposure testing.
Journal ArticleDOI

Mechanical analysis at different scales of gas pipelines

TL;DR: The actual safety margins of exercised gas pipelines depend on a number of factors that include the initial material properties and their evolution with time as discussed by the authors, which can be evaluated by mechanical tests of different complexity that can be performed on the pipeline steel at different scales.
Journal ArticleDOI

Assessment of in-service degradation of gas pipeline steel taking into account susceptibility to stress corrosion cracking

TL;DR: In this paper, a new method to evaluate in-service degradation of pipeline steels, taking into account increasing susceptibility of operated metal to SCC, was developed, which is based on modification of regulated limit values of impact toughness for as-received and serviced metal conditions separately.
References
More filters
Journal ArticleDOI

Environmentally assisted “in-bulk” steel degradation of long term service gas trunkline

TL;DR: In this paper, an analysis of a change of the mentioned characteristics together with the results of hydrogen permeation and vacuum hydrogen extraction measurements indicate considerable material degradation of trunk pipeline steel after long term service and essential role of hydrogen in these processes.
Journal ArticleDOI

In-service degradation of gas trunk pipeline X52 steel

TL;DR: In this article, the authors studied the mechanical and corrosion-mechanical properties and the behavior of hydrogen in X52 steel in the intact state and after operation for 30 years and showed that the long-term operation of gas mains made of this steel is accompanied by the degradation of the metal in the bulk of the pipe wall.
Journal ArticleDOI

Relationship between Yield Strength and Near-Neutral pH Stress Corrosion Cracking Resistance of Pipeline Steels—An Effect of Microstructure

TL;DR: In this article, the relationship between pH stress corrosion cracking (SCC) resistance and yield strength of pipeline steels was investigated and an attempt was made to make an attempt to...
Journal ArticleDOI

Abnormal manifestation of the high-temperature degradation of the weld metal of a low-alloy steel welded joint

TL;DR: In this paper, it was shown that hardness, impact toughness, mechanical properties in tension, and local parameters of fracture mechanics (static and cyclic crack resistance) are sensitive to the operating degradation of weld metal of steam pipelines of thermal power plants made of 15Kh1M1F steel.
Related Papers (5)