Journal ArticleDOI
Studies on the effect of blend ratio and crosslinking system on thermal, X-ray and dynamic mechanical properties of blends of natural rubber and ethylene-vinyl acetate copolymer
Reads0
Chats0
TLDR
In this paper, a series of blends of natural rubber (NR) and ethylene-vinyl acetate copolymer (EVA) in the crosslinked and uncrosslinked states were used for differential scanning calorimetry, X-ray, dynamic mechanical and microscopy studies.About:
This article is published in Polymer.The article was published on 1993-01-01. It has received 53 citations till now. The article focuses on the topics: Dynamic mechanical analysis & Differential scanning calorimetry.read more
Citations
More filters
Journal ArticleDOI
Nanocelluloses from jute fibers and their nanocomposites with natural rubber: Preparation and characterization.
Martin George Thomas,Eldho Abraham,P. Jyotishkumar,Hanna J. Maria,Laly A. Pothen,Sabu Thomas +5 more
TL;DR: Significant improvements in the Young's modulus and tensile strength of the nanocomposite were observed because of the reinforcing ability of the nanocellulose in the rubber matrix.
Journal ArticleDOI
Thermal and crystallisation behaviour of isotactic polypropylene/nitrile rubber blends
TL;DR: In this paper, the thermal stability of isotactic polypropylene (PP)/nitrile rubber (NBR) was studied using thermogravimetry and the effects of blend ratio, compatibilisation and dynamic vulcanisation on thermal stability were investigated.
Journal ArticleDOI
Dynamic mechanical properties and morphology of polyethylene/ethylene vinyl acetate copolymer blends
Hossein Ali Khonakdar,Udo Wagenknecht,Seyed Hassan Jafari,Seyed Hassan Jafari,R. Hässler,H. Eslami +5 more
TL;DR: In this article, the authors used dynamic mechanical analysis (DMA) to study the miscibility and various transitions (α, β, and γ) in binary blends of ethylene vinyl acetate copolymer (EVA) with low density polyethylene (LDPE) and high-density polyethylenes (HDPE).
Journal ArticleDOI
Dynamic mechanical behavior of high‐density polyethylene/ethylene vinyl acetate copolymer blends: The effects of the blend ratio, reactive compatibilization, and dynamic vulcanization
TL;DR: In this article, the effects of the blend ratio, reactive compatibilization, and dynamic vulcanization on the dynamic mechanical properties of high-density polyethylene (HDPE)/ethylene vinyl acetate (EVA) blends have been analyzed at different temperatures.
Journal ArticleDOI
Investigation of mechanical and physical properties of several industrial rubbers
TL;DR: In this paper, 12 different rubber compounds were prepared by using SMR-20 type of natural rubber and SBR-1502 type of styrene-butadiene rubber in different proportions, keeping fixed the total rubber quantity specified in the standard testing recipe.
References
More filters
Journal ArticleDOI
Influence of composition, crystallization conditions and melt phase structure on solid morphology, kinetics of crystallization and thermal behavior of binary polymer/polymer blends
TL;DR: In this paper, an investigation on the morphology, the crystallization and the thermal behavior of several binary crystallizable blends are reported, and it was found that the addition of a second non-crystallizable component causes drastic variations on some morphological and structural quantities of the semicrystalline matrix (isotactic polypropylene or nylon 6).
Journal ArticleDOI
Crystallization, morphology, structure and thermal behaviour of nylon-6/rubber blends
TL;DR: In this article, an experimental study was carried out in order to investigate the morphological, kinetic, structural and thermodynamic properties of nylon-6/rubber (namely, ethylene-propylene copolymer (EPM), functionalized by inserting along its backbone succinic anhydride groups (ePM-g-SA)) blends.
Journal ArticleDOI
Studies on the melt flow behavior of thermoplastic elastomers from polypropylene—Natural rubber blends
Baby Kuriakose,Sadhan K. De +1 more
TL;DR: In this article, the effect of crosslinking on viscosity of thermoplastic polypropylenenenatural rubber blends has been evaluated with specific reference to the effects of blend ratio, extent of dynamic cross-linking of the rubber phase and temperature, on viscoverage, flow behavior index, and deformation of the extrudate.
Journal ArticleDOI
Chlorinated polyethylene modification of blends derived from waste plastics. Part II: Mechanism of modification
C. E. Locke,Donald R Paul +1 more
TL;DR: In this paper, the authors investigated the relationship between CPE structure and its effectiveness as a blend modifier and concluded that the interaction of CPE with polyethylene derives from compatibility of rather long methylene sequences in CPE and the polyethylenes which results in good adhesive bonding.
Journal ArticleDOI
Studies on the effect of blend ratio and cure system on the degradation of natural rubber—ethylene-vinyl acetate rubber blends
TL;DR: In this paper, the effects of blend ratio and type of crosslink system on thermal ageing, γ-radiation and ozone resistance of blends of natural rubber and ethylene-vinyl acetate (EVA) rubber have been evaluated.
Related Papers (5)
Studies on the effect of blend ratio and cure system on the degradation of natural rubber—ethylene-vinyl acetate rubber blends
Dynamic mechanical properties of thermoplastic elastomers from blends of polypropylene with copolymers of ethylene with vinyl acetate
Sabu Thomas,Anne George +1 more