Journal ArticleDOI
The electrochemical behaviour of the Al8Mg5 intermetallic compound
TLDR
In this paper, the performance of the intermetallic compound Al 8 Mg 5, of importance in the selective corrosion of Al-Mg alloys, was investigated electrochemically.About:
This article is published in Corrosion Science.The article was published on 1983-01-01. It has received 33 citations till now. The article focuses on the topics: Intermetallic & Magnesium.read more
Citations
More filters
Journal ArticleDOI
Pitting corrosion of aluminum
TL;DR: In this paper, a review describes the experiments performed during the last few decades which enhance knowledge of the pitting of aluminum, specifically, metastable and stable pits, pit chemistry and the effect of intermetallics on pitting.
Journal ArticleDOI
A study on the corrosion behavior of aluminum alloys in seawater
TL;DR: In this paper, the aluminum alloys AA5083 and AA1100 were tested in seawater at 23 and 60 °C and the results showed that the type of intermetallic particles in the aluminum alloy played a major role in passivity breakdown and pit morphology.
Journal ArticleDOI
The role of precipitates enriched with copper on the susceptibility to pitting corrosion of the 2024 aluminium alloy
TL;DR: In this paper, the susceptibility to pitting corrosion of pure aluminium and 2024 T351 alloy in 0.1 mol l−1 Na2SO4 solutions containing chloride ions was investigated by a statistical approach.
Journal ArticleDOI
Corrosion protection of AA 2024-T3 by bis-[3-(triethoxysilyl)propyl]tetrasulfide in neutral sodium chloride solution. Part 1: corrosion of AA 2024-T3
Danqing Zhu,Wim J. van Ooij +1 more
TL;DR: In this article, the corrosion of 2024-T3 aluminum alloy was studied using scanning electron microscopy and energy-dispersive X-ray spectroscopy, and the results showed that the anodic S phase (Al2CuMg) particles dealloyed Al and Mg during the 3.5 h of immersion in a neutral 0.6 M sodium chloride (NaCl) solution.
Journal ArticleDOI
Heat treatment of cold spray coatings to form protective intermetallic layers
Kevin Spencer,Ming-Xing Zhang +1 more
TL;DR: In this paper, a technique for generating thick Mg/Al intermetallic coatings on Mg-Al-Zn alloys through post-spray annealing of aluminium cold spray coatings is discussed.
References
More filters
Journal ArticleDOI
Effects of Alloying Elements on the Pitting Corrosion of Aluminum
TL;DR: It is well known that high-purity aluminum or aluminum alloys containing Mg or Mn as a principal alloying element have excellent corrosion resistance, while low purity aluminum and aluminum alloy containing Cu or Fe exhibit extremely poor corrosion resistance when they are immersed in an aqueous halide solution.
Journal ArticleDOI
Das Korrosions- und Spannungsrißkorrosionsverhalten von Aluminium-Konstruktionswerkstoffen
W. Gruhl,F. E. Faller +1 more
TL;DR: In this paper, the authors discuss the corrosion behavior of structural Aluminium alloys in different environments and make reference to the important influence of naturally formed surface oxide films on corrosion resistance of Aluminium.