Journal ArticleDOI
Wear resistance of nickel-fly ash composite coatings
Reads0
Chats0
TLDR
In this paper, the wear rates of nickel-fly ash composite coatings on mild steel have been measured for unlubricated rubbing against a rotating hardened steel disc, and wear losses of composite composites were lower than those of nickel coating.About:
This article is published in Wear.The article was published on 1991-04-30. It has received 22 citations till now. The article focuses on the topics: Fly ash & Hardened steel.read more
Citations
More filters
Journal ArticleDOI
Effect of Thermo-Mechanical Processing and Heat Treatment on the Tribological Characteristics of Al Based MMC's
TL;DR: In this paper, the effect of hot forging and heat treatment on the hardness and tribological properties of Alloy-Silicon nitride composites has been investigated under both primary and secondary processing conditions.
Journal ArticleDOI
A mini-review on coal fly ash properties, utilization and synthesis of zeolites
TL;DR: In this paper, a review article gives an overview of different classifications of coal fly ash as a byproduct of coal combustion power stations that may pertain unique properties and utilization fields.
Journal ArticleDOI
Novel electroless process for copper coating of flyash using titania/ultraviolet-radiation/metal catalyst-system
TL;DR: In this article, a novel electroless process has been demonstrated to coat the surface of flyash particles with a conducting metal such as copper, where the metal is either copper or silver as demonstrated here.
Journal ArticleDOI
Temperature-dependent surface topography analysis of Illinois class F fly ash using ESEM and AFM
TL;DR: In this paper, the evolution of surface morphology of Illinois Class F fly ash with calcination temperature was monitored using atomic force microscopy and environmental scanning electron microscopy (ESEM) and significant new information on particle chemical composition and morphology was obtained using ESEM and AFM.
Journal ArticleDOI
Effect of cenosphere on dielectric properties of low density polyethylene.
TL;DR: In this paper, the dielectric properties of flyash cenosphere filled low density polyethylene (LDPE) composites with inhomogeneous dispersions of Cenosphere were analyzed.
References
More filters
Journal ArticleDOI
Wear resistance of cast graphitic aluminium alloys
TL;DR: In this paper, wear rates of cast graphitic aluminium-silicon-nickel alloys were lower than those of pure Al, Al-Si and AlSi-Ni alloys especially above pressures of 0.02 kg/mm2.
Journal ArticleDOI
The effect of normal damping in the loading system on the wear of low carbon steel
TL;DR: In this article, it was shown that the transition from severe to mild wear and the wear rate of 0.45 wt.% C steel pairs in dry friction were sensitive functions of the normal damping coefficient of the loading system.