How does a DSC measurement for pure Iron look?
Best insight from top research papers
DSC measurements for pure iron can provide information about its thermophysical properties. The molar heat capacity of liquid iron at constant pressure was measured to be 45.4 ±3.2 Jmol-1K-1 in low dc magnetic fields, and the apparent thermal conductivity of liquid iron decreased with increasing dc magnetic field . Additionally, measurements of the enthalpy, electrical resistivity, and specific heat capacity as a function of temperature have been conducted for iron . These measurements were performed using an ohmic pulse-heating technique and a differential-scanning-calorimetry technique, which both yielded good agreement of the thermophysical data within the stated uncertainties . Therefore, DSC measurements can provide valuable information about the thermophysical properties of pure iron, including its heat capacity and thermal conductivity.
Answers from top 5 papers
More filters
| Papers (5) | Insight |
|---|---|
3 Citations | The provided paper does not provide information on how a DSC measurement for pure iron looks. The paper focuses on using DSC to measure the enthalpies of formation for various transition metal oxalates. |
| The provided paper does not mention anything about a DSC measurement for pure Iron. | |
14 Citations | The paper provides electrical resistivity versus temperature results for iron using DSC. The melting enthalpy of iron is also discussed. |
| The provided paper does not mention anything about DSC (differential scanning calorimetry) measurements for pure iron. | |
| The provided paper does not mention anything about DSC (Differential Scanning Calorimetry) measurements for pure iron. |
Related Questions
Why dsc peak of emulsion cream containing mix nonionic surfactants appear at about 100 c ?4 answersThe DSC peak of the emulsion cream containing a mix of nonionic surfactants appears at about 100°C. This peak represents a phase transition in the emulsion system. The study conducted by Eccleston investigated the phase transitions in stable and unstable fatty alcohol emulsions using Differential Scanning Calorimetry (DSC). The emulsion stability was found to be related to the type of continuous phase formed when excess mixed emulsifier interacted with water. The presence of the nonionic surfactants in the emulsion cream, such as cetyl stearyl alcohol-12EO/cetyl alcohol, influenced the rheology and microstructure of the cream. The semisolid control cream was structured by a swollen lamellar gel network phase formed from the interaction of cetyl alcohol and the POE surfactant, with endothermic transitions between 25 and 100 °C. Therefore, the appearance of the DSC peak at about 100°C in the emulsion cream containing a mix of nonionic surfactants can be attributed to the phase transitions occurring in the emulsion system.
Does DSC work as a method for identifying crystal impurity?5 answersDSC can be used as a method for identifying crystal impurity. It has been shown to be a valuable tool for establishing the identity and purity of oils and fats, allowing for the detection of adulterations in plant oils and fats caused by animal fats. DSC can also be used for the purity assessment of chemical reference substances, providing comparable results to the mass balance method. However, the effectiveness of DSC for quantifying pharmaceutical crystal forms depends on the characteristics of the crystal system. Polymorphic crystal systems with well-resolved endothermic or exothermic transitions are excellent candidates for crystal form quantitation by DSC, while systems with close or melting with decomposing endotherms may not be suitable. DSC purity analysis is based on thermodynamic phase diagrams and can determine impurities that have eutectic behavior with the analyte.
How to determine heat capacity by DSC?4 answersThe specific heat capacity (Cp) of materials for thermal energy storage (TES) can be determined using differential scanning calorimetry (DSC). Several methods can be used for Cp determination, including the areas method, dynamic method, and isostep method. The areas method, which is based on the integration of the heat flow curve, has been found to provide excellent results with errors lower than 3%. On the other hand, the dynamic method and isostep method have shown worse results with errors up to 6% and 16% respectively, due to sensitivity problems during the measurements. Another method, the modified stepwise method, has been found to provide better accuracy of Cp values compared to continuous and stepwise methods. Overall, DSC is a useful technique for determining heat capacity, and the choice of method depends on the specific material and measurement requirements.
How can the melting temperature of carboxymethyl cellulose be measured using DSC?5 answersThe melting temperature of carboxymethyl cellulose (CMC) can be measured using differential scanning calorimetry (DSC). DSC is a technique that measures the heat flow associated with thermal transitions in a sample. In the case of CMC, DSC can be used to measure the transition temperature at which the CMC undergoes a phase change from a solid to a liquid state. This transition temperature is known as the melting temperature. By subjecting the CMC sample to a controlled heating rate, the DSC instrument can detect the heat flow associated with the melting of the CMC and provide a measurement of the melting temperature. This information is valuable for understanding the thermal properties of CMC and its behavior under different conditions.
What are the properties of iron-chromium alloys?5 answersIron-chromium alloys have various properties depending on their composition and application. Chromium–iron (CrFe) binary alloys have been proposed as an "inert" anode for molten oxide electrolysis (MOE) and have been found to form an inner chromia–alumina solid-solution covered by an MgCr2O4 spinel layer, which functions as an efficient conductor of electricity at elevated temperatures. Iron-chromium alloys with high wear and corrosion resistance contain a double-phase matrix with a large amount of alloy chromium, molybdenum, and copper, which improve the material's resistance to corrosion and provide excellent wear resistance. High-strength crystalline/amorphous composites based on (Ti-Ni)-(Cu-Zr) system alloys have a dual-phase structure that combines strength and ductility, with additional alloying elements suppressing the martensitic transformation. Chromium-manganese alloys have been proven to have a lower manufacturing cost compared to traditional alloys and exhibit resistance to abrasive wear due to the presence of carbides and deformation-phase transformations. Iron-chromium soft magnetic alloys have high magnetic induction and low coercive force, making them suitable for manufacturing small-sized electromagnetic valves in corrosive environments and weak magnetic fields.
How does DXA measure body composition?5 answersDual-energy X-ray absorptiometry (DXA) measures body composition by analyzing soft tissue using X-ray technology. It provides information on fat mass, lean mass, and bone mineral content. DXA scans can be performed on the whole body or specific regions of interest. The traditional method involves scanning the entire body, including the head. However, novel methods have been developed to reduce scan time and radiation exposure. These include total body less head (TBLH), neck to knee (N-K), and lower extremity (LE) scans. Studies have shown that these novel methods produce comparable results to the traditional whole-body scan, with high correlations and minimal differences in body composition measurements. DXA technology has evolved over the years to accommodate larger patients and scan wider areas, allowing for accurate assessment of body composition. Additionally, new strategies have been developed to estimate subcutaneous and intra-abdominal visceral fat using DXA. Overall, DXA is a valuable tool for assessing body composition and has various clinical applications.