How to measure release force of siliconized substrates?
Best insight from top research papers
The release force of siliconized substrates can be measured using various methods. One approach is to use micromachined devices, such as levers, diaphragms, valves, and gears, which are made from patterned silicon substrates . Another method involves studying Knudsen forces on silicon microcantilevers, where the force magnitude is quantified through device deflection using confocal microscopy . Additionally, a release film can be used to adjust the release force according to demand. This film consists of a PET substrate and a compound release layer, which can be coated onto the substrate to achieve different release forces . Furthermore, a radiation-curable silicone release composition can be used to produce silicone release-coated substrates, which exhibit a high and controlled release force when cured . Finally, a release film with a light release force can be created by adding a priming coat to improve the chemical crosslinking density of the release layer and increase the adhesive force between the release layer and the substrate .
Answers from top 5 papers
More filters
| Papers (5) | Insight |
|---|---|
| The paper does not provide information on how to measure the release force of siliconized substrates. The paper is about a release film with light release force. | |
| The paper does not provide information on how to measure the release force of siliconized substrates. | |
Patent 02 Dec 2015 5 Citations | The provided paper does not mention how to measure the release force of siliconized substrates. |
| The provided paper does not provide information on how to measure the release force of siliconized substrates. The paper focuses on experimental studies targeting Knudsen forces on silicon microcantilevers. | |
01 Jan 1998 1 Citations | The provided paper does not mention the measurement of release force of siliconized substrates. The paper discusses the application of micromachining in studying cell motility and a new micro-machined device for measuring sub-cellular traction forces. |
Related Questions
When was silicon first used in microneedles?5 answersSilicon was first utilized in microneedles for various biomedical applications in the past years, particularly excelling in in-plane configurations due to its inherent properties like mechanical strength, wear resistance, and biocompatibility. The fabrication of microneedles using silicon involved coherent porous silicon (CPS) etching technology, providing a unique approach for micro-capillaries and microneedles with different dimensions. Additionally, deep reactive ion etching (DRIE) techniques were employed to create in-plane silicon microneedles with open capillary microfluidic networks, enhancing access to dermal fluids and improving correlation with blood biomarkers. The analysis of failure mechanisms in silicon microneedles revealed that compressive failure predominantly occurs due to progressive fracture along the {111} crystal plane, showcasing the structural properties and reliability of these microneedles.
How to measure the adsorbate-induces surface stress?5 answersTo measure adsorbate-induced surface stress, various methods have been developed. One approach involves utilizing ultrasonic measurements to determine the dependence of the adsorbate's longitudinal modulus on the adsorption-induced normal pressure in nanoporous materials, enabling the calculation of changes in surface stress at the solid-liquid interface. Another method involves using a surface stress sensor based on a MEMS FabryPerot interferometer integrated with a photodiode, which enhances sensitivity through nonlinear optical transmittance changes. This sensor utilizes a deformable membrane with low Young's modulus for significant deformation upon molecular adsorption, allowing for precise measurement of surface stress changes. These techniques provide valuable insights into understanding and quantifying adsorbate-induced surface stress in various materials.
How to measure the force producing by insect?4 answersTo measure the force produced by insects, various specialized sensors have been developed. These sensors include micro-force plates for ground reaction force measurement, distributed force sensors made of transparent flexible sheets for analyzing insect motion, and micro force plates with 3D printed microsprings for evaluating tiny insect forces. Additionally, a centrifugal insect micro-force measuring system based on centrifugal principles has been designed to accurately measure forces with mN magnitude, suitable for studying insect attachment and friction forces. These innovative sensor technologies enable real-time, high-resolution force measurements in multiple directions, providing valuable insights into the biomechanics of insects during locomotion and other activities.
How to measure photoresist?5 answersPhotoresist can be measured using various methods. One method involves throwing a layer of thick and uniform photoresist on a blank substrate, drying it, and then measuring the transmittances of the blank substrate and the exposed or unexposed photoresist using a spectrophotometer. The refractive index of the photoresist after being exposed can be obtained by analyzing and calculating the measurement data using an extremum method through Macleod software. Another method involves determining the photoresist thickness by coating photoresist on test wafers, measuring the photoresist thickness of each wafer, exposing the photoresist, and obtaining the minimum exposure energy swing curve. Electron microscopy-based metrology can also be used to characterize photoresist features by depositing a protective coating on the photoresist, which allows for reliable and accurate profile information to be captured. Additionally, sensitive light scattering measurements can be used to quantify the amount of residues after photoresist stripping on different substrates, providing unique information regarding the efficiency of stripping procedures. Finally, an apparatus and method for analyzing photoresist involve selecting a proper irradiate light according to the sample and analyzing the properties of the photoresist in real time.
How to measure optical absorption silicon nitride waveguide ?5 answersOptical absorption in silicon nitride waveguides can be measured using different methods. One approach is to measure the transmission losses of the waveguide at specific wavelengths. Another method involves using a p-i-n structure within the waveguide to induce a TPA-generated current, which can be measured directly by probing metal contacts on the waveguide's surface. Additionally, the use of SiN waveguides in mid-infrared sensors has been demonstrated for detecting volatile organic compounds (VOCs) through characteristic absorption measurements. Furthermore, metamaterial waveguide structures have been investigated for improving the performance of silicon solar cells, with numerical simulations showing high absorption coefficients. Finally, stimulated emission from sensitized erbium ions in silicon-rich silicon nitride waveguides has been observed through pump-probe measurements.
How much load can silicone carry?5 answersSilicone has been found to have varying load-carrying capacities depending on the specific application and conditions. In the context of silicone breast explants, cyclic compression tests showed that the explants could endure a maximum load of 2.5 kN before failure occurred. In the context of a peristaltically actuated device for minimally invasive surgery, silicone rubber was chosen as the material due to its compliance. However, the mechanical behavior of silicone rubber changes with increasing number of load cycles, leading to stress softening. In the context of rocket fuels, the addition of elemental silicon to gel, hybrid, and ducted rocket fuels increased the specific impulse and density specific impulse. The concentration of silicon added ranged from 0.5% to 70% by weight, resulting in increased performance compared to carbon. In the context of radiation treatment, silicone-coated polyamide wound dressing caused an increase in skin dose when exposed to photon beams, but had no clinical relevance when exposed to electron beams. The load-carrying capacity of silicone in traditional actuators was not mentioned in the provided abstracts.