Is there are any research of TPD on MoS2?
Best insight from top research papers
There is research on the synthesis of MoS2 using chemical vapor deposition (CVD) and solution-based methods. CVD is used to prepare MoS2 thin layers in large scale, but it requires vacuum and expensive precursors . On the other hand, solution-based methods offer a promising approach for large-area formation of MoS2 films at low cost. One study developed a drop-on-demand printing method for MoS2 atomic layers based on sol-gel synthesis, which resulted in large-size and uniform MoS2 atomic layers without the need for CVD . Additionally, there is research on the electrical modulation behavior of exfoliated MoS2 and the effects of organic dopants on its electrical properties. The band state of dopants influences the threshold voltages of MoS2 field-effect transistors, while the defect density affects the on/off current ratio and mobility .
Answers from top 5 papers
More filters
| Papers (5) | Insight |
|---|---|
| No, the paper does not mention any research on TPD (Temperature Programmed Desorption) of MoS2. | |
3 Citations | The paper does not mention any research specifically on TPD (Thermal Programmed Desorption) on MoS2. |
8 Citations | The paper does not mention any research on TPD (Thermal Programmed Desorption) on MoS2. The paper is about the effects of organic dopants on the electrical properties of MoS2 thin-film transistors. |
| No, the paper does not mention any research on TPD (Temperature Programmed Desorption) on MoS2. The paper focuses on the development of a drop-on-demand printing method for MoS2 atomic layers using sol-gel synthesis. | |
| The paper does not mention any research on TPD (Temperature Programmed Desorption) of MoS2. |
Related Questions
How does the hydrogen adsorption capacity of MoS2 compare to that of WS2?5 answersThe hydrogen adsorption capacity of MoS2 compared to WS2 shows that MoS2 exhibits a notably low change in hydrogen adsorption free energy, making it competitive for hydrogen evolution catalysts. On the other hand, WS2 demonstrates a higher hydrogen storage capacity for MgH2, absorbing approximately 3.72 wt% of hydrogen within 1.3 minutes at 300°C under 13 atm pressure. This difference in hydrogen adsorption behavior between MoS2 and WS2 can be attributed to their distinct electronic and catalytic properties, with MoS2 having a lower change in hydrogen adsorption free energy, while WS2 shows enhanced hydrogen storage capacity and desorption kinetics for MgH2.
What is MoS2?5 answersMoS2, or molybdenum disulfide, is a material that has gained attention for its unique physicochemical properties and potential applications in various fields. It is a transition metal dichalcogenide consisting of a layer of molybdenum atoms sandwiched between layers of sulfur atoms. In its 2D form, MoS2 exhibits a direct electronic band gap and moderate electron mobility, making it suitable for electronic devices. MoS2 also possesses excellent nonlinear properties, making it a promising candidate for optical deep networks and image classification. Additionally, MoS2 has high carrier mobility, stability, and a reasonable band gap, making it a potential material for advanced integrated circuits and photodetectors. Furthermore, hierarchical nanostructures composed of MoS2 nanosheets have shown excellent performance in catalysis, such as the oxygen evolution reaction, due to their unique structural and morphological properties.
When is the MoS2 shape distorted?4 answersThe shape of MoS2 is distorted when it is in intercalation compounds freshly prepared from single-layer dispersions.
What is the effect of surface engineering of MoS2 on thei properties?5 answersSurface engineering of MoS2 has a significant effect on its properties. One study found that the growth of vertically standing MoS2 on pyramid Si was facilitated by tailoring the surface hydrophilicity with a thin TiO2 layer, resulting in improved light trapping and catalytic kinetics. Another study showed that the creation of sulfur vacancies on the MoS2 surface improved the surface coverage for atomic layer deposition (ALD) of TiO2 films, while treatment with mercaptoethanol (ME) removed gap states and improved the electronic properties of the stack. Additionally, the hydrothermal growth of MoS2 conductive wrapping on carbon nanotube/polyaniline composites enhanced their electrochemical properties, including specific capacitance and cycling stability. Furthermore, surface and phase engineering methods such as ethylene glycol intercalation, oxygen plasma treatment, and elements substitution have been used to increase the number of MoS2 active sites and enhance its sensing capabilities for wearable sensor devices.
How MoS2 is acting as catalyst for iron air batteries?5 answersMoS2 acts as a catalyst for iron-air batteries by enhancing their electrocatalytic performance and stability. The combination of MoS2 with other materials, such as N-doped carbon and Fe atoms, creates core/shell nanospheres that exhibit superior bifunctional electrocatalytic activity for both the oxygen reduction reaction (ORR) and the oxygen evolution reaction (OER). The core/shell structure of Co9S8@MoS2 heterostructures promotes the synergistic effect between Co9S8 and MoS2, resulting in excellent hydrogen evolution reaction (HER) performance. The vertically aligned MoS2 nanosheet encapsulated Mo-N/C framework with interfacial Mo-N coupling centers exhibits robust electrocatalytic activity and stability for the hydrogen evolution reaction, oxygen evolution reaction, and oxygen reduction reaction. Fe-embedded monolayer MoS2 (Fe-MoS2) shows high catalytic activity for the CO catalytic oxidation, attributed to charge transfer and orbital hybridization between the adsorbates and the Fe atom. Additionally, the incorporation of MoS2 additives in Fe anodes improves the corrosion inhibition efficiency and capacity retention of Fe-air batteries.
Why MoS2 is a good material for FETs?3 answersMoS2 is a good material for FETs because it is a transition metal dichalcogenide (TMD) with only a few atoms thickness, making it suitable for scaling down current semiconductor devices. It has been demonstrated that MoS2 is promising as a channel material for FETs. Additionally, MoS2 has unique electrical properties, such as its atomically thin nature and ultra-thin-body (UTB) semiconductor characteristics, which reduce current leakage and enable gate-to-channel control. Furthermore, MoS2 exhibits resilience to short-channel effects, making it suitable for device scaling and achieving higher device density. The use of MoS2 in FETs also allows for better carrier collection efficiency, leading to enhanced electronic and optoelectronic performance. Overall, MoS2's properties and performance make it a promising material for FETs in future electronics applications.