Ways to Apply a conductive coating on a 5 mm diameter 20 mm lenght glass bulb?
Best insight from top research papers
To apply a conductive coating on a 5 mm diameter, 20 mm length glass bulb, there are several methods available. One approach is to use a local vacuum coating device, which consists of a coating cup connected to a vacuum system, a heating evaporation device, and a sealing ring . Another option is to use a UV-cured transparent conductive coating, which is prepared from a base resin, a composite solvent, a conductive filler, a dispersant, an inhibitor, and a photoinitiator . Additionally, a conductive glass lining composition can be used, which includes a frit and metal fibers of specific dimensions . Another method involves mixing a tin compound vapor with an antimon compound vapor and spraying it onto the inside surface of the glass bulb . Finally, the glass bulb can be detached from a powder spray means, and pressurized air can be sprayed from a through hole formed in an opposite electrode located outside the glass bulb to clean the nozzle .
Answers from top 5 papers
More filters
| Papers (5) | Insight |
|---|---|
| The provided paper does not mention specific ways to apply a conductive coating on a glass bulb. The paper discusses a method to clean a nozzle used for powder spray on a glass bulb, but it does not provide information on coating application techniques. | |
| The paper does not provide information on ways to apply a conductive coating on a specific size and length of a glass bulb. The paper discusses a method of forming a low resistance value part and a high resistance value part on the inside surface of a glass bulb using a mixture of tin and antimon compounds. | |
| The paper does not provide information on specific ways to apply a conductive coating on a glass bulb. The paper is about a UV-cured transparent conductive coating and its preparation method. | |
| The paper does not provide specific information on ways to apply a conductive coating on a glass bulb of a specific size. The paper is about a local vacuum coating device for the internal wall of a glass bulb. | |
| The paper does not provide information on ways to apply a conductive coating on a glass bulb. The paper is about a conductive glass lining composition. |
Related Questions
How to make conductive stretchable filament for 3d printing?5 answersTo create conductive stretchable filaments for 3D printing, various approaches can be employed based on the research findings. One method involves using an emulsion system with a conductive elastomer composite, immiscible solvent, and emulsifying solvent, allowing for omnidirectional printing of elastic conductors with high stretchability and small feature sizes. Another technique combines direct ink write (DIW) 3D printing of soft, stretchable conductive inks with DIW-based 4D printing of liquid crystal elastomers (LCEs), resulting in electrically responsive, shape programmable materials with high conductivity and deformability. Additionally, a 3D printing method integrates highly stretchable conductive fibers into textiles and ready-made garments using a sheath-core fiber with a liquid metal core for high conductivity and large deformation tolerance. These methods offer innovative ways to produce conductive stretchable filaments suitable for 3D printing applications.
How conductivity of a tread compound can be improved?4 answersThe conductivity of a tread compound can be improved by adding conductive carbon black or an electrically conductive additive to the rubber composition. Conductive carbon black, when added to raw rubber, improves thermal conductivity and reduces vulcanizing time, leading to improved productivity and prevention of heat aging during vulcanization. The addition of a conductive carbon black with a large surface area and small particle size increases the conductivity of the silica reinforced tire tread rubber composition without compromising rotation resistance and brake property. Similarly, the inclusion of an electrically conductive additive, such as a poly(alkylene oxide)-containing polymer with an alkali metal salt dissolved therein, in the tire tread composition enhances electrical conductivity properties. By incorporating multiple types of carbon black, silanized silica, and a carbon substrate reinforcing material, the electrical conductivity of the tire composition can be improved while maintaining the characteristics of a conventional tire.
Is higher conductivity of finer ash leachates expected?4 answersHigher conductivity of finer ash leachates is expected. The porosity and hydraulic conductivity of the ash play a significant role in leachate characteristics. Finer ash particles have higher porosity and hydraulic conductivity, which allows for easier flow of leachate through the material. This increased flow leads to higher conductivity in the leachates. Additionally, the presence of smaller particles can result in a larger surface area, which can enhance the leaching process and increase the concentration of ions in the leachate. Therefore, it can be expected that finer ash leachates will have higher conductivity compared to coarser ash leachates.
How to apply conductive layers on glass?5 answersTo apply conductive layers on glass, there are several methods available. One method involves pretreating the glass substrate with hydrofluoric acid, followed by coating a silicon-contained intermediate layer using tetraethoxysilane (TEOS) and a silane coupling agent as precursors. Another method includes laminating a first ink layer, a first shadow eliminating layer, and a conductive film layer on the upper surface of the glass substrate, along with a second shadow eliminating layer on the lower surface. Laser-induced chemical liquid phase deposition (LCLD) is another technique that has been studied, where high laser power is used to supply sufficient thermal energy for a stable chemical reduction, resulting in faster fabrication of conductive circuit patterns. Additionally, a substrate with a conductive layer can be created using a low-reflection layer containing titanium oxide or zirconium oxide, a conductive layer containing aluminum or an aluminum alloy, and a protective layer containing tin oxide. These methods offer different approaches to achieve conductive layers on glass, each with its own advantages and applications.
Can you please provide some related literature about Conductive Paint?5 answersConductive paint is a type of paint that contains materials with high electrical conductivity, allowing it to be used for various applications. One study by Shi Lei et al. developed a conductive paint using a thermoplastic acrylic resin as the matrix resin, which improved heat resistance, weatherability, and waterproofness. Another study by Oh Hyeon Cheol and Kim Jong-Il focused on conductive paint for electrodeposition painting, which included non-oxide ceramic particles with an oxide layer on their surface. Yin Shiyao et al. developed a conductive paint specifically for capacitors, which had good conductive properties, adhesion firmness, heat stability, and corrosion resistance. Zhang Weiwei's research resulted in an electrically conductive paint with silver-nickel powder as the conductivity medium, acrylic resin and alkyd resin as primary materials, and good smoothness, covering power, abrasion resistance, and corrosion resistance. Lastly, Seong Yun Jeon et al. developed a conductive paint composition using a dispersant made of a block copolymer, a surface-modified carbon compound as the conductive material, and a polymer binder, which could be used to create a conductive film with various functions.
How to make PTFE coating material for brush or spray coating on conductive sensing yarn?5 answersTo make PTFE coating material for brush or spray coating on conductive sensing yarn, there are several methods described in the provided abstracts. One method involves preparing a PTFE coating solution by mixing an organic solvent, carbon nanoparticles, and a nonaqueous PTFE solution. Another method suggests rubbing dry particles of PTFE across the surface of the substrate using a fabric or felt polishing wheel. Additionally, low temperature sintering of suspension PTFE followed by shaving or peeling can be used to produce PTFE yarn sealant packing material. However, none of the abstracts specifically mention the use of PTFE coating material for conductive sensing yarn.