It is shown that, particularly for terrestrial cellular telephony, the interference-suppression feature of CDMA (code division multiple access) can result in a many-fold increase in capacity over analog and even over competing digital techniques. A single-cell system, such as a hubbed satellite network, is addressed, and the basic expression for capacity is developed. The corresponding expressions for a multiple-cell system are derived. and the distribution on the number of users supportable per cell is determined. It is concluded that properly augmented and power-controlled multiple-cell CDMA promises a quantum increase in current cellular capacity. >

On the capacity of a cellular CDMA system

Millimeter wave (mmWave) cellular systems will enable gigabit-per-second data rates thanks to the large bandwidth available at mmWave frequencies. To realize sufficient link margin, mmWave systems will employ directional beamforming with large antenna arrays at both the transmitter and receiver. Due to the high cost and power consumption of gigasample mixed-signal devices, mmWave precoding will likely be divided among the analog and digital domains. The large number of antennas and the presence of analog beamforming requires the development of mmWave-specific channel estimation and precoding algorithms. This paper develops an adaptive algorithm to estimate the mmWave channel parameters that exploits the poor scattering nature of the channel. To enable the efficient operation of this algorithm, a novel hierarchical multi-resolution codebook is designed to construct training beamforming vectors with different beamwidths. For single-path channels, an upper bound on the estimation error probability using the proposed algorithm is derived, and some insights into the efficient allocation of the training power among the adaptive stages of the algorithm are obtained. The adaptive channel estimation algorithm is then extended to the multi-path case relying on the sparse nature of the channel. Using the estimated channel, this paper proposes a new hybrid analog/digital precoding algorithm that overcomes the hardware constraints on the analog-only beamforming, and approaches the performance of digital solutions. Simulation results show that the proposed low-complexity channel estimation algorithm achieves comparable precoding gains compared to exhaustive channel training algorithms. The results illustrate that the proposed channel estimation and precoding algorithms can approach the coverage probability achieved by perfect channel knowledge even in the presence of interference.

Channel Estimation and Hybrid Precoding for Millimeter Wave Cellular Systems

Array processing involves manipulation of signals induced on various antenna elements. Its capabilities of steering nulls to reduce cochannel interferences and pointing independent beams toward various mobiles, as well as its ability to provide estimates of directions of radiating sources, make it attractive to a mobile communications system designer. Array processing is expected to play an important role in fulfilling the increased demands of various mobile communications services. Part I of this paper showed how an array could be utilized in different configurations to improve the performance of mobile communications systems, with references to various studies where feasibility of apt array system for mobile communications is considered. This paper provides a comprehensive and detailed treatment of different beam-forming schemes, adaptive algorithms to adjust the required weighting on antennas, direction-of-arrival estimation methods-including their performance comparison-and effects of errors on the performance of an array system, as well as schemes to alleviate them. This paper brings together almost all aspects of array signal processing.

/pdf/application-of-antenna-arrays-to-mobile-communications-ii-52fds1c81j.pdf

Application of antenna arrays to mobile communications. II. Beam-forming and direction-of-arrival considerations

We have provided a review of some recent results on the emerging technology of MIMO radar with colocated antennas. We have shown that the waveform diversity offered by such a MIMO radar system enables significant superiority over its phased-array counterpart, including much improved parameter identifiability, direct applicability of adaptive techniques for parameter estimation, as well as superior flexibility of transmit beampattern designs. We hope that this overview of our recent results on the MIMO radar, along with the related results obtained by our colleagues, will stimulate the interest deserved by this topic in both academia and government agencies as well as industry.

MIMO Radar with Colocated Antennas

High peak-to-average power ratio of the transmit signal is a major drawback of multicarrier transmission such as OFDM or DMT. This article describes some of the important PAPR reduction techniques for multicarrier transmission including amplitude clipping and filtering, coding, partial transmit sequence, selected mapping, interleaving, tone reservation, tone injection, and active constellation extension. Also, we make some remarks on the criteria for PAPR reduction technique selection and briefly address the problem of PAPR reduction in OFDMA and MIMO-OFDM.

An overview of peak-to-average power ratio reduction techniques for multicarrier transmission

MIMO (multiple-input multiple-output) radar refers to an architecture that employs multiple, spatially distributed transmitters and receivers. While, in a general sense, MIMO radar can be viewed as a type of multistatic radar, the separate nomenclature suggests unique features that set MIMO radar apart from the multistatic radar literature and that have a close relation to MIMO communications. This article reviews some recent work on MIMO radar with widely separated antennas. Widely separated transmit/receive antennas capture the spatial diversity of the target's radar cross section (RCS). Unique features of MIMO radar are explained and illustrated by examples. It is shown that with noncoherent processing, a target's RCS spatial variations can be exploited to obtain a diversity gain for target detection and for estimation of various parameters, such as angle of arrival and Doppler. For target location, it is shown that coherent processing can provide a resolution far exceeding that supported by the radar's waveform.

MIMO Radar with Widely Separated Antennas

It has recently been shown that multiple-input multiple-output (MIMO) antenna systems have the potential to improve dramatically the performance of communication systems over single antenna systems. Unlike beamforming, which presumes a high correlation between signals either transmitted or received by an array, the MIMO concept exploits the independence between signals at the array elements. In conventional radar, target scintillations are regarded as a nuisance parameter that degrades radar performance. The novelty of MIMO radar is that it takes the opposite view; namely, it capitalizes on target scintillations to improve the radar's performance. We introduce the MIMO concept for radar. The MIMO radar system under consideration consists of a transmit array with widely-spaced elements such that each views a different aspect of the target. The array at the receiver is a conventional array used for direction finding (DF). The system performance analysis is carried out in terms of the Cramer-Rao bound of the mean-square error in estimating the target direction. It is shown that MIMO radar leads to significant performance improvement in DF accuracy.

MIMO radar: an idea whose time has come

Inspired by recent advances in multiple-input multiple-output (MIMO) communications, this proposal introduces the statistical MIMO radar concept To the authors' knowledge, this is the first time that the statistical MIMO is being proposed for radar The fundamental difference between statistical MIMO and other radar array systems is that the latter seek to maximize the coherent processing gain, while statistical MIMO radar capitalizes on the diversity of target scattering to improve radar performance Coherent processing is made possible by highly correlated signals at the receiver array, whereas in statistical MIMO radar, the signals received by the array elements are uncorrelated Radar targets generally consist of many small elemental scatterers that are fused by the radar waveform and the processing at the receiver, to result in echoes with fluctuating amplitude and phase It is well known that in conventional radar, slow fluctuations of the target radar cross section (RCS) result in target fades that degrade radar performance By spacing the antenna elements at the transmitter and at the receiver such that the target angular spread is manifested, the MIMO radar can exploit the spatial diversity of target scatterers opening the way to a variety of new techniques that can improve radar performance This paper focuses on the application of the target spatial diversity to improve detection performance The optimal detector in the Neyman–Pearson sense is developed and analyzed for the statistical MIMO radar It is shown that the optimal detector consists of noncoherent processing of the receiver sensors' outputs and that for cases of practical interest, detection performance is superior to that obtained through coherent processing An optimal detector invariant to the signal and noise levels is also developed and analyzed In this case as well, statistical MIMO radar provides great improvements over other types of array radars

Spatial Diversity in Radars&#8212;Models and Detection Performance

This paper presents an analysis of target localization accuracy, attainable by the use of multiple-input multiple-output (MIMO) radar systems, configured with multiple transmit and receive sensors, widely distributed over an area. The Cramer-Rao lower bound (CRLB) for target localization accuracy is developed for both coherent and noncoherent processing. Coherent processing requires a common phase reference for all transmit and receive sensors. The CRLB is shown to be inversely proportional to the signal effective bandwidth in the noncoherent case, but is approximately inversely proportional to the carrier frequency in the coherent case. We further prove that optimization over the sensors' positions lowers the CRLB by a factor equal to the product of the number of transmitting and receiving sensors. The best linear unbiased estimator (BLUE) is derived for the MIMO target localization problem. The BLUE's utility is in providing a closed-form localization estimate that facilitates the analysis of the relations between sensors locations, target location, and localization accuracy. Geometric dilution of precision (GDOP) contours are used to map the relative performance accuracy for a given layout of radars over a given geographic area.

Target Localization Accuracy Gain in MIMO Radar-Based Systems

UWB systems based on impulse radio have the potential to provide very high data rates over short distances. In this paper, a new pulse shape is presented that satisfies the FCC spectral mask. Using this pulse, the link budget is calculated to quantify the relationship between data rate and distance. It is shown that UWB can be a good candidate for reliably transmitting 100 Mbps over distances at about 10 meters.

Alexander M. Haimovich

Papers

MIMO Radar with Widely Separated Antennas

MIMO radar: an idea whose time has come

Spatial Diversity in Radars—Models and Detection Performance

Target Localization Accuracy Gain in MIMO Radar-Based Systems

On the spectral and power requirements for ultra-wideband transmission

Alexander M. Haimovich

Papers

MIMO Radar with Widely Separated Antennas

MIMO radar: an idea whose time has come

Spatial Diversity in Radars&#8212;Models and Detection Performance

Target Localization Accuracy Gain in MIMO Radar-Based Systems

On the spectral and power requirements for ultra-wideband transmission

Spatial Diversity in Radars—Models and Detection Performance