Showing papers by "Christian Sternemann published in 2019"
TL;DR: The targeted and precise anchoring of Cu-based alkylether-functionalised layered-pillared MOF crystallites onto substrates via stepwise liquid-phase epitaxy is reported, identifying a structural responsiveness that is distinct to that of the bulk.
Abstract: Flexible metal-organic frameworks (MOFs) are structurally flexible, porous, crystalline solids that show a structural transition in response to a stimulus. If MOF-based solid-state and microelectronic devices are to be capable of leveraging such structural flexibility, then the integration of MOF thin films into a device configuration is crucial. Here we report the targeted and precise anchoring of Cu-based alkylether-functionalised layered-pillared MOF crystallites onto substrates via stepwise liquid-phase epitaxy. The structural transformation during methanol sorption is monitored by in-situ grazing incidence X-ray diffraction. Interestingly, spatially-controlled anchoring of the flexible MOFs on the surface induces a distinct structural responsiveness which is different from the bulk powder and can be systematically controlled by varying the crystallite characteristics, for instance dimensions and orientation. This fundamental understanding of thin-film flexibility is of paramount importance for the rational design of MOF-based devices utilising the structural flexibility in specific applications such as selective sensors.
72 citations
01 Feb 2019
TL;DR: In this paper, the authors measured the O K-edge and the Si L-2,L-3-edge in silica up to 110 GPa using X-ray Raman scattering spectroscopy, and found a striking match to calculated spectra based on molecular dynamic simulations.
Abstract: SiO(2 )is the main component of silicate melts and thus controls their network structure and physical properties. The compressibility and viscosities of melts at depth are governed by their short range atomic and electronic structure. We measured the O K-edge and the Si L-2,L-3-edge in silica up to 110 GPa using X-ray Raman scattering spectroscopy, and found a striking match to calculated spectra based on structures from molecular dynamic simulations. Between 20 and 27 GPa, Si-[4] species are converted into a mixture of Si-[5] and Si-[6] species and between 60 and 70 GPa, Si-[6] becomes dominant at the expense of Si-[5] with no further increase up to at least 110 GPa. Coordination higher than 6 is only reached beyond 140 GPa, corroborating results from Brillouin scattering. Network modifying elements in silicate melts may shift this change in coordination to lower pressures and thus magmas could be denser than residual solids at the depth of the core-mantle boundary.
32 citations
TL;DR: X-ray emission spectra reveal that under pressure conditions of Earth's lower mantle, the compaction mechanism in amorphous germanium dioxide on the atomic scale is similar to that of its crystalline form as discussed by the authors.
Abstract: X-ray emission spectra reveal that under pressure conditions of Earth's lower mantle, the compaction mechanism in amorphous germanium dioxide on the atomic scale is similar to that of its crystalline form.
21 citations
TL;DR: In this article, a new application for nanostructuration control of electronic devices is proposed, which is a challenging task ahead of chemists and chemical engineers, and even more so when this new application is new.
Abstract: Searching for novel materials and controlling their nanostructuration into electronic devices is a challenging task ahead of chemists and chemical engineers. Even more so when this new application ...
18 citations
TL;DR: In this article, the effect of surface pretreatments on conventional WC-Co surfaces is examined for the first time, and the results show that the pretreatment does not affect the hardness nor Young's modulus of the CrAlN top layer.
Abstract: The deposition of coatings by means of Physical Vapor Deposition (PVD) is an established process to enhance the lifetime and performance of carbide bulk tools. Although the effect of surface pretreatments on conventional WC-Co surfaces is well known, this investigation examines for the first time, how different surface pretreatments affect the surface integrity of thermally sprayed WC-Co substrates prior a subsequent PVD layer deposition and its resulting properties. Therefore, a WC-12Co feedstock with an average WC particle size of 100 nm was thermally sprayed on AISI M3 steel substrates using High Velocity Oxy-Fuel (HVOF) technique. Hereinafter, the HVOF sprayed WC-Co coatings were grounded and polished, thus serving as substrates for further surface pretreatments and the deposition of a CrAlN PVD hard coating by means of magnetron sputtering. To evaluate the influence of various surface pretreatments on the HVOF sprayed WC-Co coatings, several sequences such as heating, inert gas ion etching, metal ion etching, and High Power Impulse Magnetron Sputtering (HIPIMS)-etching were carried out. With respect to the subsequent PVD layer deposition, the results show that the pretreatment does neither affect the hardness nor Young's modulus of the CrAlN top layer. Yet, different effects on the WC-Co surface and PVD coating adhesion are observed. Inert gas ion etching leads to a faster removal of the carbides than of the Co-binder matrix. In contrast, metal ion etching provides a “micro-blasting” effect and removes the binder matrix as verified by Atomic Force Microscope (AFM) measurements. As a result, a decrease of the compressive residual stress state and an increase of the surface free energy are observed. With respect to HIPIMS-etching, a Cr-nanolayer was applied onto the WC-Co surface, which enhances the adhesion of the CrAlN top layer. Nevertheless, HRC Rockwell adhesion and scratch tests reveal a superior adhesion for samples pretreated with the metal ion etching.
17 citations
TL;DR: In this article, the authors present a setup for combined X-ray emission and Raman scattering spectroscopy at high pressure and high temperature using resistively or laser-heated diamond anvil cells in order to achieve thermodynamic conditions which appear in the Earth's interior.
Abstract: X-ray emission and X-ray Raman scattering spectroscopy are powerful tools to investigate the local electronic and atomic structure of high and low Z elements in situ. Notably, these methods can be applied for in situ spectroscopy at high pressure and high temperature using resistively or laser-heated diamond anvil cells in order to achieve thermodynamic conditions which appear in the Earth's interior. We present a setup for combined X-ray emission and X-ray Raman scattering studies at beamline P01 of PETRA III using a portable wavelength-dispersive von Hamos spectrometer together with the permanently installed multiple-analyzer Johann-type spectrometer. The capabilities of this setup are exemplified by investigating the iron spin crossover of siderite FeCO3 up to 49.3 GPa by measuring the Fe M2,3-edge and the Fe Kβ1,3 emission line simultaneously. With this setup, the Fe valence-to-core emission can be detected together with the Kβ1,3 emission line providing complementary information on the sample's electronic structure. By implementing a laser-heating device, we demonstrate the strength of using a von Hamos type spectrometer for spin state mapping at extreme conditions. Finally, we give different examples of low Z elements' absorption edges relevant for application in geoscience that are accessible with the Johann-type XRS spectrometer. With this setup new insights into the spin transition and compression mechanisms of Earth's mantle materials can be obtained of importance for comprehension of the macroscopic physical and chemical properties of the Earth's interior.
15 citations
TL;DR: This study demonstrates that for the monomeric compound, the broadband conductivity and mechanical spectra reflect the same underlying distribution of activation barriers and that the Random Barrier Model describes fairly well both the ionic and structural relaxation processes in these materials.
Abstract: Combining experimental results obtained with X-ray scattering and field-gradient nuclear magnetic resonance (NMR) and an assessment of new and previous dielectric and rheology data, our study focuses on the molecular weight (Mw) evolution of local structure and dynamics in a homologous series of covalently bonded ionic liquids. Performed on a family of electrolytes with a tailored degree of ionic decoupling, this study reveals the differences between monomeric and oligomeric melts with respect to their structural organization, mass and charge transport, and molecular diffusion. Our study demonstrates that for the monomeric compound, the broadband conductivity and mechanical spectra reflect the same underlying distribution of activation barriers and that the Random Barrier Model describes fairly well both the ionic and structural relaxation processes in these materials. Moreover, the oligomers with chains comprising ten segments only exhibit both structural and dynamical fingerprints of a genuine polymer. A comparison of conductivity levels estimated using the self-diffusion coefficients probed via NMR and those probed directly with dielectric spectroscopy reveals the emerging of ion correlations which are affecting the macroscopic charge transport in these materials in a chain-length dependent manner.
14 citations
TL;DR: Measurements, molecular dynamics simulations, and predictions using Perturbed-Chain Statistical Associating Fluid Theory of the density of aqueous solutions in a pressure range from 1 bar to 5000’bar, a pressure regime that is highly relevant for both biochemical applications and the fundamental understanding of solvation are presented.
8 citations
TL;DR: It is shown that DMPC multilayers become highly pressure-responsive by the incorporation of low amounts of cholesterol, resulting in a strong pressure-induced expansion of the bilayer spacing, accompanied by a high tendency of the multilayer system to detach from the substrate.
3 citations