The Huisgen 1,3-dipolar cycloaddition reaction of organic azides and alkynes has gained considerable attention in recent years due to the introduction in 2001 of Cu(1) catalysis by Tornoe and Meldal, leading to a major improvement in both rate and regioselectivity of the reaction, as realized independently by the Meldal and the Sharpless laboratories. The great success of the Cu(1) catalyzed reaction is rooted in the fact that it is a virtually quantitative, very robust, insensitive, general, and orthogonal ligation reaction, suitable for even biomolecular ligation and in vivo tagging or as a polymerization reaction for synthesis of long linear polymers. The triazole formed is essentially chemically inert to reactive conditions, e.g. oxidation, reduction, and hydrolysis, and has an intermediate polarity with a dipolar moment of ∼5 D. The basis for the unique properties and rate enhancement for triazole formation under Cu(1) catalysis should be found in the high ∆G of the reaction in combination with the low character of polarity of the dipole of the noncatalyzed thermal reaction, which leads to a considerable activation barrier. In order to understand the reaction in detail, it therefore seems important to spend a moment to consider the structural and mechanistic aspects of the catalysis. The reaction is quite insensitive to reaction conditions as long as Cu(1) is present and may be performed in an aqueous or organic environment both in solution and on solid support.

Cu-catalyzed azide-alkyne cycloaddition.

Although fire is now rarely used in synthetic chemistry, it was not until Robert Bunsen invented the burner in 1855 that the energy from this heat source could be applied to a reaction vessel in a focused manner. The Bunsen burner was later superseded by the isomantle, oil bath, or hot plate as a source for applying heat to a chemical reaction. In the past few years, heating and driving chemical reactions by microwave energy has been an increasingly popular theme in the scientific community. This nonclassical heating technique is slowly moving from a laboratory curiosity to an established technique that is heavily used in both academia and industry. The efficiency of "microwave flash heating" in dramatically reducing reaction times (from days and hours to minutes and seconds) is just one of the many advantages. This Review highlights recent applications of controlled microwave heating in modern organic synthesis, and discusses some of the underlying phenomena and issues involved.

https://onlinelibrary.wiley.com/doi/pdf/10.1002/anie.200400655

Controlled microwave heating in modern organic synthesis.

The site-selective formation of carbon-carbon bonds through direct functionalizations of otherwise unreactive carbon-hydrogen bonds constitutes an economically attractive strategy for an overall streamlining of sustainable syntheses. In recent decades, intensive research efforts have led to the development of various reaction conditions for challenging C-H bond functionalizations, among which transition-metal-catalyzed transformations arguably constitute thus far the most valuable tool. For instance, the use of inter alia palladium, ruthenium, rhodium, copper, or iron complexes set the stage for chemo-, site-, diastereo-, and/or enantioselective C-H bond functionalizations. Key to success was generally a detailed mechanistic understanding of the elementary C-H bond metalation step, which depending on the nature of the metal fragment can proceed via several distinct reaction pathways. Traditionally, three different modes of action were primarily considered for CH bond metalations, namely, (i) oxidative addition with electronrich late transition metals, (ii) σ-bond metathesis with early transition metals, and (iii) electrophilic activation with electrondeficient late transition metals (Scheme 1). However, more recent mechanistic studies indicated the existence of a continuum of electrophilic, ambiphilic, and nucleophilic interactions. Within this continuum, detailed experimental and computational analysis provided strong evidence for novel C-H bond metalationmechanisms relying on the assistance of a bifunctional ligand bearing an additional Lewis-basic heteroatom, such as that found in (heteroatom-substituted) secondary phosphine oxides or most prominently carboxylates (Scheme 1, iv). This novel insight into the nature of stoichiometric metalations has served as stimulus for the development of novel transformations based on cocatalytic amounts of carboxylates, which significantly broadened the scope of C-H bond functionalizations in recent years, with most remarkable progress being made in palladiumor ruthenium-catalyzed direct arylations and direct alkylations. These carboxylate-assisted C-H bond transformations were mostly proposed to proceed via a mechanism in which metalation takes place via a concerted base-assisted deprotonation. To mechanistically differentiate these intramolecular metalations new acronyms have recently been introduced into the literature, such as CMD (concerted metalationdeprotonation), IES (internal electrophilic substitution), or AMLA (ambiphilic metal ligand activation), which describe related mechanisms and will be used below where appropriate. This review summarizes the development and scope of carboxylates as cocatalysts in transition-metal-catalyzed C-H functionalizations until autumn 2010. Moreover, experimental and computational studies on stoichiometric metalation reactions being of relevance to the mechanism of these catalytic processes are discussed as well. Mechanistically related C-H bond cleavage reactions with ruthenium or iridium complexes bearing monodentate ligands are, however, only covered with respect to their working mode, and transformations with stoichiometric amounts of simple acetate bases are solely included when their mechanism was suggested to proceed by acetate-assisted metalation.

Carboxylate-assisted transition-metal-catalyzed C-H bond functionalizations: mechanism and scope.

3.7. Palladium Nanoparticles as Catalysts 888 3.8. Other Transition-Metal Complexes 888 3.9. Transition-Metal-Free Reactions 889 4. Applications 889 4.1. Alkynylation of Arenes 889 4.2. Alkynylation of Heterocycles 891 4.3. Synthesis of Enynes and Enediynes 894 4.4. Synthesis of Ynones 896 4.5. Synthesis of Carbocyclic Systems 897 4.6. Synthesis of Heterocyclic Systems 898 4.7. Synthesis of Natural Products 903 4.8. Synthesis of Electronic and Electrooptical Molecules 906

https://www.chem.ccu.edu.tw/~joyce/referance/ericyang/Chem.%20Rev/Chem.%20Rev.%202007,%20107,%20874-922.pdf

The Sonogashira Reaction: A Booming Methodology in Synthetic Organic Chemistry†

4.2.8. Reductive Coupling 3109 5. Reaction of Aromatic Compounds 3110 5.1. Electrophilic Substitutions 3110 5.2. Radical Substitution 3111 5.3. Oxidative Coupling 3111 5.4. Photochemical Reactions 3111 6. Reaction of Carbonyl Compounds 3111 6.1. Nucleophilic Additions 3111 6.1.1. Allylation 3111 6.1.2. Propargylation 3120 6.1.3. Benzylation 3121 6.1.4. Arylation/Vinylation 3121 6.1.5. Alkynylation 3121 6.1.6. Alkylation 3121 6.1.7. Reformatsky-Type Reaction 3122 6.1.8. Direct Aldol Reaction 3122 6.1.9. Mukaiyama Aldol Reaction 3124 6.1.10. Hydrogen Cyanide Addition 3125 6.2. Pinacol Coupling 3126 6.3. Wittig Reactions 3126 7. Reaction of R,â-Unsaturated Carbonyl Compounds 3127

Organic Reactions in Aqueous Media with a Focus on Carbon−Carbon Bond Formations: A Decade Update

Nitrogen containing compounds are of great importance because of their interesting and diverse biological activities. The construction of the C–N bond is of significant importance as it opens avenues for the introduction of nitrogen in organic molecules. Despite significant advancements in this field, the construction of the C–N bond is still a major challenge for organic chemists, due to the involvement of harsh reaction conditions or the use of expensive catalysts in many cases. Thus, it is a challenge to develop alternative, milder and cheaper methodologies for the construction of C–N bonds. Herein, we have selected some prime literature reports that may serve this purpose.

C–N bond forming cross-coupling reactions: an overview

In recent years, the transition-metal catalyzed three-component coupling of an aldehyde, an alkyne and an amine, commonly called A3-coupling, has been established as a convenient and general approach towards propargylamines. Furthermore, the A3-coupling has found a broad application as a key step in the construction of various nitrogen-containing heterocycles, biologically active compounds and natural products. Several interesting modifications of the A3-coupling as well as different tandem reactions involving A3-coupling have been developed. This tutorial review aims to highlight the current achievements in the field of A3-couplings and related transformations.

A walk around the A3-coupling

A Microwave-Assisted Click Chemistry Synthesis of 1,4-Disubstituted 1,2,3-Triazoles via a Copper(I)-Catalyzed Three-Component Reaction

First described almost a decade ago, “click” reactions such as the Cu(I)-catalyzed azide–alkyne cycloaddition (CuAAC) are widely used today in organic and medicinal chemistry, in the polymer and material science field, and in chemical biology. While most click reactions can be performed at room temperature there are instances where some form of process intensification is required. In this tutorial review, aimed at the synthetic chemistry community, examples of click chemistry carried out under non-classical reaction conditions, such as for example applying microwave heating or continuous flow processing will be highlighted.

Click chemistry under non-classical reaction conditions

Transition metal-catalyzed C-C bond formations have been well studied over the last four decades. An improved mechanistic understanding of such reactions has helped chemists to develop further improvements, modifications and even new reactions. In the area of transition metal-catalyzed cross-coupling reactions the C-S bond cleaving reactions have attracted a lot of attention in the last decade as they provide a good alternative to the use of organo-halide reagents in traditional cross-coupling reactions. The availability of a wide range of organo-sulfur species provides the opportunity for developing different transformations for the synthesis of interesting organic compounds. This tutorial review focuses on recent examples of the transition metal-catalyzed C-C bond forming reactions using organo-sulfur species.

Erik V. Van der Eycken

Papers

C–N bond forming cross-coupling reactions: an overview

A walk around the A3-coupling

A Microwave-Assisted Click Chemistry Synthesis of 1,4-Disubstituted 1,2,3-Triazoles via a Copper(I)-Catalyzed Three-Component Reaction

Click chemistry under non-classical reaction conditions

Transition metal-catalyzed C-C bond formation via C-S bond cleavage: an overview.