Francois Clemens

Abstract: Urban flood incidents induced by heavy rainfall in many cases entail flooding of combined sewer systems. These flood waters are likely to be contaminated and may pose potential health risks to citizens exposed to pathogens in these waters. The purpose of this study was to evaluate the microbial risk associated with sewer flooding incidents. Concentrations of Escherichia coli, intestinal enterococci and Campylobacter were measured in samples from 3 sewer flooding incidents. The results indicate faecal contamination: faecal indicator organism concentrations were similar to those found in crude sewage under high-flow conditions and Campylobacter was detected in all samples. Due to infrequent occurrence of such incidents only a small number of samples could be collected; additional data were collected from controlled flooding experiments and analyses of samples from combined sewers. The results were used for a screening-level quantitative microbial risk assessment (QMRA). Calculated annual risks values vary from 5 x 10(-6) for Cryptosporidium assuming a low exposure scenario to 0.03 for Giardia assuming a high exposure scenario. The results of this screening-level risk assessment justify further research and data collection to allow more reliable quantitative assessment of health risks related to contaminated urban flood waters.

Abstract: In common with most infrastructure systems, sewers are often inspected visually. Currently, the results from these inspections inform decisions for significant investments regarding sewer rehabilitation or replacement. In practice, the quality of the data and its analysis are not questioned although psychological research indicates that, as a consequence of the use of subjective analysis of the collected images, errors are inevitable. This article assesses the quality of the analysis of visual sewer inspection data by analysing data reproducibility; three types of capabilities to subjectively assess data are distinguished: the recognition of defects, the description of defects according to a prescribed coding system and the interpretation of sewer inspection reports. The introduced uncertainty is studied using three types of data: inspector examination results of sewer inspection courses, data gathered in day-to-day practice, and the results of repetitive interpretation of the inspection results. After a thorough analysis of the data it can be concluded that for all cases visual sewer inspection data proved poorly reproducible. For the recognition of defects, it was found that the probability of a false positive is in the order of a few percent, the probability of a false negative is in the order of 25%.

Abstract: A thorough review has been performed on interpolation methods to fill gaps in time-series, efficiency criteria, and uncertainty quantifications. On one hand, there are numerous available methods: interpolation, regression, autoregressive, machine learning methods, etc. On the other hand, there are many methods and criteria to estimate efficiencies of these methods, but uncertainties on the interpolated values are rarely calculated. Furthermore, while they are estimated according to standard methods, the prediction uncertainty is not taken into account: a discussion is thus presented on the uncertainty estimation of interpolated/extrapolated data. Finally, some suggestions for further research and a new method are proposed.

Abstract: A newly developed technique using distributed temperature sensing (DTS) has been developed to find illicit household sewage connections to storm water systems in the Netherlands. DTS allows for the accurate measurement of temperature along a fiber-optic cable, with high spatial (2 m) and temporal (30 s) resolution. We inserted a fiber-optic cable of 1300 m in two storm water drains. At certain locations, significant temperature differences with an intermittent character were measured, indicating inflow of water that was not storm water. In all cases, we found that foul water from households or companies entered the storm water system through an illicit sewage connection. The method of using temperature differences for illicit connection detection in storm water networks is discussed. The technique of using fiber-optic cables for distributed temperature sensing is explained in detail. The DTS method is a reliable, inexpensive and practically feasible method to detect illicit connections to storm water systems, which does not require access to private property.

Abstract: Cities are increasingly vulnerable to floods generated by intense rainfall, because of their high degree of imperviousness, implementation of infrastructures, and changes in precipitation patterns due to climate change. Accurate information of convective storm characteristics at high spatial and temporal resolution is a crucial input for urban hydrological models to be able to simulate fast runoff processes and enhance flood prediction. In this paper, a detailed study of the sensitivity of urban hydrological response to high resolution radar rainfall was conducted. Rainfall rates derived from X-band dual polarimetric weather radar for four rainstorms were used as input into a detailed hydrodynamic sewer model for an urban catchment in Rotterdam, the Netherlands. Dimensionless parameters were derived to compare results between different storm conditions and to describe the effect of rainfall spatial resolution in relation to storm and hydrodynamic model properties: rainfall sampling number (rainfall resolution vs. storm size), catchment sampling number (rainfall resolution vs. catchment size), runoff and sewer sampling number (rainfall resolution vs. runoff and sewer model resolution respectively). Results show catchment smearing effect for rainfall resolution approaching half the catchment size, i.e. for catchments sampling numbers greater than 0.5 averaged rainfall volumes decrease about 20%. Moreover, deviations in maximum water depths, form 10 to 30% depending on the storm, occur for rainfall resolution close to storm size, describing storm smearing effect due to rainfall coarsening. Model results also show the sensitivity of modelled runoff peaks and maximum water depths to the resolution of the runoff areas and sewer density respectively. Sensitivity to temporal resolution of rainfall input seems low compared to spatial resolution, for the storms analysed in this study. Findings are in agreement with previous studies on natural catchments, thus the sampling numbers seem to be promising as an approach to describe sensitivity of hydrological response to rainfall variability for intra-urban catchments and local convective storms. More storms and different urban catchments of varying characteristics need to be analysed in order to validate these findings.

Abstract: Cause, conseguenze e strategie di mitigazione Proponiamo il primo di una serie di articoli in cui affronteremo l’attuale problema dei mutamenti climatici. Presentiamo il documento redatto, votato e pubblicato dall’Ipcc - Comitato intergovernativo sui cambiamenti climatici - che illustra la sintesi delle ricerche svolte su questo tema rilevante.

Abstract: The boundary layer equations for plane, incompressible, and steady flow are $$\matrix{ {u{{\partial u} \over {\partial x}} + v{{\partial u} \over {\partial y}} = - {1 \over \varrho }{{\partial p} \over {\partial x}} + v{{{\partial ^2}u} \over {\partial {y^2}}},} \cr {0 = {{\partial p} \over {\partial y}},} \cr {{{\partial u} \over {\partial x}} + {{\partial v} \over {\partial y}} = 0.} \cr }$$