Girish Kumar

Abstract: This article proposes printed dual-band monopole antenna structures for Wireless Local Area Network (WLAN) applications in IEEE 802.11 a/b/g. The proposed antennas are fabricated on a low cost easily available FR4 substrate, which effectively covers both 2.4 and 5 GHz bands. The antenna structures are derived from an E-shape dual-band monopole antenna, which generates two separate resonant frequencies for the desired dual-band operations. The one arm resonates at the 5 GHz band, whereas the other resonates at the 2.4 GHz band. The proposed antennas can easily be fed by using a 50-Ω probe feed. The measured VSWR is <2 over the 2.4–2.5 GHz and 5.15–5.875 GHz. The radiation patterns indicate the suitability of these antennas for WLAN applications. © 2008 Wiley Periodicals, Inc. Microwave Opt Technol Lett 50: 2483–2487, 2008; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.23728

TL;DR: In this article, a microstrip antenna array with ratrace comparator at X-band for monopulse tracking radar has been designed and simulated using IE3D software to achieve better side lobe level and low cross polar components, the radiating antenna consists of mixed feeding technique.

TL;DR: In this article, an improved linear transmission line (LTL) model was developed after incorporating several modifications in the reported LTL model for analyzing arbitrarily shaped microstrip antennas (MSAs), which should be symmetrical with respect to the feed axis.

TL;DR: In this article, the effect of microwave power level and exposure time on the quality of walnut kernels was evaluated and it was found that microwave power levels and exposure times significantly affected water activity, colour change, temperature rise, peroxide value and free fatty acid levels (FFA).

TL;DR: An energy harvesting system which extracts energy from radio frequency radiation for battery charging applications using a new differential center tapped Micro strip antenna, off-chip matching circuit, on-chip novel CMOS rectifier and control circuitry in 180nm CMOS technology is presented.