Materials with good flexibility and high conductivity that can provide electromagnetic interference (EMI) shielding with minimal thickness are highly desirable, especially if they can be easily processed into films. Two-dimensional metal carbides and nitrides, known as MXenes, combine metallic conductivity and hydrophilic surfaces. Here, we demonstrate the potential of several MXenes and their polymer composites for EMI shielding. A 45-micrometer-thick Ti3C2Tx film exhibited EMI shielding effectiveness of 92 decibels (>50 decibels for a 2.5-micrometer film), which is the highest among synthetic materials of comparable thickness produced to date. This performance originates from the excellent electrical conductivity of Ti3C2Tx films (4600 Siemens per centimeter) and multiple internal reflections from Ti3C2Tx flakes in free-standing films. The mechanical flexibility and easy coating capability offered by MXenes and their composites enable them to shield surfaces of any shape while providing high EMI shielding efficiency.

Electromagnetic interference shielding with 2D transition metal carbides (MXenes)

Carbon nanotube–polymer composites: Chemistry, processing, mechanical and electrical properties

IO N The rapid development of modern electronics packed with highly integrated circuits generates severe electromagnetic radiation, which leads to harmful effects on highly sensitive precision electronic equipment as well as the living environment for human beings. Great effort has been made for the development of high-performance electromagnetic interference (EMI) shielding materials. In addition to high EMI shielding performance, being lightweight and fl exible are two other important technical requirements for effective and practical EMI shielding applications especially in areas of aircraft, aerospace, automobiles, and fast-growing next-generation fl exible electronics such as portable electronics and wearable devices. [ 1 ] Recently, electrically conductive polymer composites have received much attention for EMI shielding applications, [ 1–12 ] because of their light weight, resistance to corrosion, fl exibility, good processability, and low cost compared to the conventional metal-based materials. The EMI shielding effectiveness of the polymer composites depends critically on the intrinsic electrical conductivity, dielectric constant, magnetic permeability, aspect ratio, and content of conductive fi llers. [ 1–12 ] It is believed that high electrical conductivity and connectivity of the conductive fi llers can improve EMI shielding performance. [ 1 , 2 , 4 , 7 , 8 ]

Lightweight and Flexible Graphene Foam Composites for High‐Performance Electromagnetic Interference Shielding

Polymer nanocomposites based on functionalized carbon nanotubes

Electromagnetic interference shielding mechanisms of CNT/polymer composites

Thin and flexible composite films of raw or purified multiwalled carbon nanotube (MWCNT) with various mass fractions and poly(methylmethacrylate) (PMMA) were synthesized for electromagnetic interference (EMI) shielding material. From scanning electron microscopy and high-resolution transmission electron microscopy photographs, we observed the formation of a conducting network through MWCNTs in an insulating PMMA matrix and the existence of an Fe catalyst in MWCNTs. The dc conductivity (σdc) of the systems increased with increasing MWCNT mass fraction, showing typical percolation behavior. The measured EMI shielding efficiency (SE) of MWCNT–PMMA composites by using the extended ASTM D4935-99 method (50 MHz–13.5 GHz) increased with increasing MWCNT mass fraction as σdc. The highest EMI SE for raw MWCNT–PMMA composites was ∼27 dB, indicating commercial use for far-field EMI shielding. The contribution of absorption to total EMI SE of the systems is larger than that of reflection. Based on magnetic permeabili...

/pdf/electrical-conductivity-and-electromagnetic-interference-n8sxorurle.pdf

Electrical conductivity and electromagnetic interference shielding of multiwalled carbon nanotube composites containing Fe catalyst

Flexible and transparent gas-diffusion barriers have played an important role in recent years. The present study describes a flexible barrier film with a tailored architecture of cationic polyelectrolytes and clay/polymer nanoassemblies. Highly oriented and well-aligned barrier films were achieved by the consecutive absorption of flexible cationic polymer and anionic montmorillonite platelets. The experimental results showed that the layer-by-layer deposition of oppositely charged thin films containing self-assembled poly(vinyl alcohol) and montmorillonites improved their gas barrier characteristics based on the Ca degradation test, enhancing their optical transparency. This nanostructure, fabricated using a solution process, is useful in many applications, for example, flexible and moisture-free organic electronics. This simple and fast method is suitable for the mass coating of large surface areas, as required in industry.

Fuzzy nanoassembly of polyelectrolyte and layered clay multicomposite toward a reliable gas barrier.

Negative mold transfer patterned conductive polymer electrode for flexible organic light-emitting diodes

We investigate the enhancement mechanism of the electroluminescence (EL) of alkali metal based n-doped organic light-emitting diodes (OLEDs). The dual role of the n-dopant (carrier transport and lowering of the injection barrier) induces a trade-off. When the electron transport layer (ETL) is optimally doped by the n-dopant for the highest conductivity, the amount of n-dopant at the ETL/cathode interface is insufficient to form enough chemical bonds with the cathode for efficient carrier injection. This insufficient amount of n-dopant limits the carrier injection properties. To solve this problem, we demonstrated that the addition of an electron injection layer (EIL) comprised of the n-dopant could increase its presence at the interface and, thereby, improve the carrier injection properties and, consequently, the EL efficiency. Moreover, simply using an alkali-metal alloy (rather than co-deposition) on the n-doped ETL as a cathode, instead of using the additional EIL, greatly improves the EL efficiency of...

Hakkoo Kim

Papers

Electrical conductivity and electromagnetic interference shielding of multiwalled carbon nanotube composites containing Fe catalyst

Fuzzy nanoassembly of polyelectrolyte and layered clay multicomposite toward a reliable gas barrier.

Negative mold transfer patterned conductive polymer electrode for flexible organic light-emitting diodes

Role of n-dopant based electron injection layer in n-doped organic light-emitting diodes and its simple alternative

Improvement of light out-coupling in organic light-emitting diodes by printed nanosized random texture layer