Indoor localization has recently witnessed an increase in interest, due to the potential wide range of services it can provide by leveraging Internet of Things (IoT), and ubiquitous connectivity. Different techniques, wireless technologies and mechanisms have been proposed in the literature to provide indoor localization services in order to improve the services provided to the users. However, there is a lack of an up-to-date survey paper that incorporates some of the recently proposed accurate and reliable localization systems. In this paper, we aim to provide a detailed survey of different indoor localization techniques, such as angle of arrival (AoA), time of flight (ToF), return time of flight (RTOF), and received signal strength (RSS); based on technologies, such as WiFi, radio frequency identification device (RFID), ultra wideband (UWB), Bluetooth, and systems that have been proposed in the literature. This paper primarily discusses localization and positioning of human users and their devices. We highlight the strengths of the existing systems proposed in the literature. In contrast with the existing surveys, we also evaluate different systems from the perspective of energy efficiency, availability, cost, reception range, latency, scalability, and tracking accuracy. Rather than comparing the technologies or techniques, we compare the localization systems and summarize their working principle. We also discuss remaining challenges to accurate indoor localization.

A Survey of Indoor Localization Systems and Technologies

Low power wide area (LPWA) networks are attracting a lot of attention primarily because of their ability to offer affordable connectivity to the low-power devices distributed over very large geographical areas. In realizing the vision of the Internet of Things, LPWA technologies complement and sometimes supersede the conventional cellular and short range wireless technologies in performance for various emerging smart city and machine-to-machine applications. This review paper presents the design goals and the techniques, which different LPWA technologies exploit to offer wide-area coverage to low-power devices at the expense of low data rates. We survey several emerging LPWA technologies and the standardization activities carried out by different standards development organizations (e.g., IEEE, IETF, 3GPP, ETSI) as well as the industrial consortia built around individual LPWA technologies (e.g., LoRa Alliance, Weightless-SIG, and Dash7 alliance). We further note that LPWA technologies adopt similar approaches, thus sharing similar limitations and challenges. This paper expands on these research challenges and identifies potential directions to address them. While the proprietary LPWA technologies are already hitting the market with large nationwide roll-outs, this paper encourages an active engagement of the research community in solving problems that will shape the connectivity of tens of billions of devices in the next decade.

Low Power Wide Area Networks: An Overview

A comparative study of LPWAN technologies for large-scale IoT deployment

Recently, wireless technologies have been growing actively all around the world. In the context of wireless technology, fifth-generation (5G) technology has become a most challenging and interesting topic in wireless research. This article provides an overview of the Internet of Things (IoT) in 5G wireless systems. IoT in the 5G system will be a game changer in the future generation. It will open a door for new wireless architecture and smart services. Recent cellular network LTE (4G) will not be sufficient and efficient to meet the demands of multiple device connectivity and high data rate, more bandwidth, low-latency quality of service (QoS), and low interference. To address these challenges, we consider 5G as the most promising technology. We provide a detailed overview of challenges and vision of various communication industries in 5G IoT systems. The different layers in 5G IoT systems are discussed in detail. This article provides a comprehensive review on emerging and enabling technologies related to the 5G system that enables IoT. We consider the technology drivers for 5G wireless technology, such as 5G new radio (NR), multiple-input–multiple-output antenna with the beamformation technology, mm-wave commutation technology, heterogeneous networks (HetNets), the role of augmented reality (AR) in IoT, which are discussed in detail. We also provide a review on low-power wide-area networks (LPWANs), security challenges, and its control measure in the 5G IoT scenario. This article introduces the role of AR in the 5G IoT scenario. This article also discusses the research gaps and future directions. The focus is also on application areas of IoT in 5G systems. We, therefore, outline some of the important research directions in 5G IoT.

A Comprehensive Survey on Internet of Things (IoT) Toward 5G Wireless Systems

Satellite communications (SatComs) have recently entered a period of renewed interest motivated by technological advances and nurtured through private investment and ventures. The present survey aims at capturing the state of the art in SatComs, while highlighting the most promising open research topics. Firstly, the main innovation drivers are motivated, such as new constellation types, on-board processing capabilities, non-terrestrial networks and space-based data collection/processing. Secondly, the most promising applications are described, i.e., 5G integration, space communications, Earth observation, aeronautical and maritime tracking and communication. Subsequently, an in-depth literature review is provided across five axes: i) system aspects, ii) air interface, iii) medium access, iv) networking, v) testbeds & prototyping. Finally, a number of future challenges and the respective open research topics are described.

/pdf/satellite-communications-in-the-new-space-era-a-survey-and-13ge69opzh.pdf

Satellite Communications in the New Space Era: A Survey and Future Challenges

Narrowband Internet of Things (NB-IoT) is a new cellular technology introduced in 3GPP Release 13 for providing wide-area coverage for the Internet of Things (IoT). This article provides an overview of the air interface of NB-IoT. We describe how NB-IoT addresses key IoT requirements such as deployment flexibility, low device complexity, long battery life time, support of massive number of devices in a cell, and significant coverage extension beyond existing cellular technologies. We also share the various design rationales during the standardization of NB-IoT in Release 13 and point out several open areas for future evolution of NB-IoT.

A Primer on 3GPP Narrowband Internet of Things (NB-IoT)

Narrowband Internet of Things (NB-IoT) is a new cellular technology introduced in 3GPP Release 13 for providing wide-area coverage for IoT. This article provides an overview of the air interface of NB-IoT. We describe how NB-IoT addresses key IoT requirements such as deployment flexibility, low device complexity, long battery lifetime, support of massive numbers of devices in a cell, and significant coverage extension beyond existing cellular technologies. We also share the various design rationales during the standardization of NB-IoT in Release 13 and point out several open areas for future evolution of NB-IoT.

A Primer on 3GPP Narrowband Internet of Things

Many use cases in the Internet of Things (IoT) will require or benefit from location information, making positioning a vital dimension of the IoT. The 3GPP has dedicated a significant effort during its Release 14 to enhance positioning support for its IoT technologies to further improve the 3GPPbased IoT eco-system. In this article, we identify the design challenges of positioning support in LTE-M and NB-IoT, and overview the 3GPP's work in enhancing the positioning support for LTE-M and NB-IoT. We focus on OTDOA, which is a downlink based positioning method. We provide an overview of the OTDOA architecture and protocols, summarize the designs of OTDOA positioning reference signals, and present simulation results to illustrate the positioning performance.

Positioning for the Internet of Things: A 3GPP Perspective

Many use cases in the Internet of Things (IoT) will require or benefit from location information, making positioning a vital dimension of the IoT. The 3rd Generation Partnership Project (3GPP) has dedicated a significant effort during its Release 14 to enhance positioning support for its IoT technologies to further improve the 3GPP-based IoT eco-system. In this article, we identify the design challenges of positioning support in Long-Term Evolution Machine Type Communication (LTE-M) and Narrowband IoT (NB-IoT), and overview the 3GPP's work in enhancing the positioning support for LTE-M and NB-IoT. We focus on Observed Time Difference of Arrival (OTDOA), which is a downlink based positioning method. We provide an overview of the OTDOA architecture and protocols, summarize the designs of OTDOA positioning reference signals, and present simulation results to illustrate the positioning performance.

A major step was taken in 3GPP Release 13 to support the Internet of Things (IoT) and machinetype communications (MTC) for LTE by the introduction of the LTE-M device Category M1. In Release 14, LTE-M has been further enhanced by features in important areas. In this article these features are described and explained. The range of possible use cases that can be addressed by LTE-M devices is greatly improved through the introduction of data rate improvements for device Category M1 and the new device Category M2, which increases the maximum supported data rates, the support for location services with significantly improved accuracy, and support for multicast to enable, for example, simultaneous firmware downloads to a multitude of devices. Release 14 also improves the ability of LTE-M to support voice services by means of a set of specific optimizations. Furthermore, the higher bit rates are beneficial for the LTE-M fulfillment of 5G requirements.

Hazhir Shokri Razaghi

Papers

A Primer on 3GPP Narrowband Internet of Things (NB-IoT)

A Primer on 3GPP Narrowband Internet of Things

Positioning for the Internet of Things: A 3GPP Perspective

Positioning for the Internet of Things: A 3GPP Perspective

Overview of 3GPP Release 14 Further Enhanced MTC