Ammonia is a widely produced chemical that is the basis of most fertilisers. However, it is currently derived from fossil fuels and there is an urgent need to develop sustainable approaches to its production. Ammonia is also being considered as a renewable energy carrier, allowing efficient storage and transportation of renewables. For these reasons, the electrochemical nitrogen reduction reaction (NRR) is currently being intensely investigated as the basis for future mass production of ammonia from renewables. This Perspective critiques current steps and miss-steps towards this important goal in terms of experimental methodology and catalyst selection, proposing a protocol for rigorous experimentation. We discuss the issue of catalyst selectivity and the approaches to promoting the NRR over H2 production. Finally, we translate these mechanistic discussions, and the key metrics being pursued in the field, into the bigger picture of ammonia production by other sustainable processes, discussing benchmarks by which NRR progress can be assessed. The electrochemical reduction of nitrogen is being intensely investigated as the basis for future ammonia production. This Perspective critiques current steps and missteps towards this goal in terms of experimental methodology and catalyst selection, proposing a protocol for rigorous experimentation.

/pdf/challenges-and-prospects-in-the-catalysis-of-pmh1w5frkb.pdf

Challenges and prospects in the catalysis of electroreduction of nitrogen to ammonia

The low efficiency of the electrocatalytic oxidation of water to O2 (oxygen evolution reaction-OER) is considered as one of the major roadblocks for the storage of electricity from renewable sources in form of molecular fuels like H2 or hydrocarbons Especially in acidic environments, compatible with the powerful proton exchange membrane (PEM), an earth-abundant OER catalyst that combines high activity and high stability is still unknown Current PEM-compatible OER catalysts still rely mostly on Ir and/or Ru as active components, which are both very scarce elements of the platinum group Hence, the Ir and/or Ru amount in OER catalysts has to be strictly minimized Unfortunately, the OER mechanism, which is the most powerful tool for OER catalyst optimization, still remains unclear In this review, we first summarize the current state of our understanding of the OER mechanism on PEM-compatible heterogeneous electrocatalysts, before we compare and contrast that to the OER mechanism on homogenous catalysts Thereafter, an overview over monometallic OER catalysts is provided to obtain insights into structure-function relations followed by a review of current material optimization concepts and support materials Moreover, missing links required to complete the mechanistic picture as well as the most promising material optimization concepts are pointed out

/pdf/electrocatalytic-oxygen-evolution-reaction-in-acidic-1iee2zzq8k.pdf

Electrocatalytic Oxygen Evolution Reaction in Acidic Environments – Reaction Mechanisms and Catalysts

This Review addresses the technical challenges, scientific basis, recent progress, and outlook with respect to the stability and degradation of catalysts for the oxygen evolution reaction (OER) operating at electrolyzer anodes in acidic environments with an emphasis on ion exchange membrane applications. First, the term “catalyst stability” is clarified, as well as current performance targets, major catalyst degradation mechanisms, and their mitigation strategies. Suitable in situ experimental methods are then evaluated to give insight into catalyst degradation and possible pathways to tune OER catalyst stability. Finally, the importance of identifying universal figures of merit for stability is highlighted, leading to a comprehensive accelerated lifetime test that could yield comparable performance data across different laboratories and catalyst types. The aim of this Review is to help disseminate and stress the important relationships between structure, composition, and stability of OER catalysts under different operating conditions.

/pdf/the-stability-challenges-of-oxygen-evolving-catalysts-5bxg0qwy04.pdf

The Stability Challenges of Oxygen Evolving Catalysts: Towards a Common Fundamental Understanding and Mitigation of Catalyst Degradation.

Reducing the noble metal loading and increasing the specific activity of the oxygen evolution catalysts are omnipresent challenges in proton-exchange-membrane water electrolysis, which have recently been tackled by utilizing mixed oxides of noble and non-noble elements. However, proper verification of the stability of these materials is still pending. Here we introduce a metric to explore the dissolution processes of various iridium-based oxides, defined as the ratio between the amounts of evolved oxygen and dissolved iridium. The so-called stability number is independent of loading, surface area or involved active sites and provides a reasonable comparison of diverse materials with respect to stability. The case study on iridium-based perovskites shows that leaching of the non-noble elements in mixed oxides leads to the formation of highly active amorphous iridium oxide, the instability of which is explained by the generation of short-lived vacancies that favour dissolution. These insights are meant to guide further research, which should be devoted to increasing the utilization of highly durable pure crystalline iridium oxide and finding solutions to stabilize amorphous iridium oxides.

/pdf/the-stability-number-as-a-metric-for-electrocatalyst-4iyqdov35f.pdf

The stability number as a metric for electrocatalyst stability benchmarking

The establishment of electrocatalysts with bifunctionality for efficient oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) in acidic environments is necessary for the development of proton exchange membrane (PEM) water electrolyzers for the production of clean hydrogen fuel. RuIr alloy is considered to be a promising electrocatalyst because of its favorable OER performance and potential for HER. Here, the design of a bifunctional electrocatalyst with greatly boosted water-splitting performance from doping RuIr alloy nanocrystals with transition metals that modify electronic structure and binding strength of reaction intermediates is reported. Significantly, Co-RuIr results in small overpotentials of 235 mV for OER and 14 mV for HER (@ 10 mA cm-2 current density) in 0.1 m HClO4 media. Therefore a cell voltage of just 1.52 V is needed for overall water splitting to produce hydrogen and oxygen. More importantly, for a series of M-RuIr (M = Co, Ni, Fe), the catalytic activity dependence at fundamental level on the chemical/valence states is used to establish a novel composition-activity relationship. This permits new design principles for bifunctional electrocatalysts.

Transition-Metal-Doped RuIr Bifunctional Nanocrystals for Overall Water Splitting in Acidic Environments.

Iridium-based materials are among the most active and stable electrocatalysts for the oxygen evolution reaction. Amorphous iridium oxide structures are found to be more active than their crystalline counterparts. Herein, we combine synchrotron-based X-ray photoemission and absorption spectroscopies with theoretical calculations to investigate the electronic structure of Ir metal, rutile-type IrO2, and an amorphous IrOx. Theory and experiment show that while the Ir 4f line shape of Ir metal is well described by a simple Doniach–Sunjic function, the peculiar line shape of rutile-type IrO2 requires the addition of a shake-up satellite 1 eV above the main line. In the catalytically more active amorphous IrOx, we find that additional intensity appears in the Ir 4f spectrum at higher binding energy when compared with rutile-type IrO2 along with a pre-edge feature in the O K-edge. We identify these additional features as electronic defects in the anionic and cationic frameworks, namely, formally OI− and IrIII, which may explain the increased activity of amorphous IrOx electrocatalysts. We corroborate our findings by in situ X-ray diffraction as well as in situ X-ray photoemission and absorption spectroscopies. Copyright © 2015 John Wiley & Sons, Ltd.

/pdf/the-electronic-structure-of-iridium-and-its-oxides-51c6a754fk.pdf

The electronic structure of iridium and its oxides

Iridium oxide based electrodes are among the most promising candidates for electrocatalyzing the oxygen evolution reaction, making it imperative to understand their chemical/electronic structure. However, the complexity of iridium oxide's electronic structure makes it particularly difficult to experimentally determine the chemical state of the active surface species. To achieve an accurate understanding of the electronic structure of iridium oxide surfaces, we have combined synchrotron-based X-ray photoemission and absorption spectroscopies with ab initio calculations. Our investigation reveals a pre-edge feature in the O K-edge of highly catalytically active X-ray amorphous iridium oxides that we have identified as O 2p hole states forming in conjunction with IrIII. These electronic defects in the near-surface region of the anionic and cationic framework are likely critical for the enhanced activity of amorphous iridium oxides relative to their crystalline counterparts.

/pdf/the-electronic-structure-of-iridium-oxide-electrodes-active-1rxbds20de.pdf

The electronic structure of iridium oxide electrodes active in water splitting.

The role of trivalent (La, Sm, Gd, and Y) and tetravalent (Hf, Zr, and Ti) dopants in the catalytic, structural, and electronic properties of ceria was investigated. Promoted ceria catalysts were synthesized by coprecipitation with ammonia and tested in HCl and CO oxidation. Ceria catalysts exhibit a medium high reactivity and excellent stability in HCl oxidation. The intrinsic reactivity of ceria in HCl oxidation can be improved by a factor of 2 when doping with Hf and Zr in appropriate quantities, whereas trivalent dopants are detrimental. Although both oxidation reactions rely on the existence of oxygen vacancies, the order of reactivity in HCl and CO oxidation is not completely parallel. The effects of promoters on the electronic conductivity and the vacancy formation energy were studied by contactless conductivity experiments using the microwave cavity perturbation technique and by density functional theory calculations. Furthermore, transport properties were also assessed on the basis of theoretical...

Jasmin Allan

Papers

The electronic structure of iridium and its oxides

The electronic structure of iridium oxide electrodes active in water splitting.

Promoted Ceria: A Structural, Catalytic, and Computational Study