비만아 부모의 돌봄 경험: q 방법론

By 27 February 2020, the outbreak of coronavirus disease 2019 (COVID-19) caused 82 623 confirmed cases and 2858 deaths globally, more than severe acute respiratory syndrome (SARS) (8273 cases, 775 deaths) and Middle East respiratory syndrome (MERS) (1139 cases, 431 deaths) caused in 2003 and 2013, respectively. COVID-19 has spread to 46 countries internationally. Total fatality rate of COVID-19 is estimated at 3.46% by far based on published data from the Chinese Center for Disease Control and Prevention (China CDC). Average incubation period of COVID-19 is around 6.4 days, ranges from 0 to 24 days. The basic reproductive number (R0 ) of COVID-19 ranges from 2 to 3.5 at the early phase regardless of different prediction models, which is higher than SARS and MERS. A study from China CDC showed majority of patients (80.9%) were considered asymptomatic or mild pneumonia but released large amounts of viruses at the early phase of infection, which posed enormous challenges for containing the spread of COVID-19. Nosocomial transmission was another severe problem. A total of 3019 health workers were infected by 12 February 2020, which accounted for 3.83% of total number of infections, and extremely burdened the health system, especially in Wuhan. Limited epidemiological and clinical data suggest that the disease spectrum of COVID-19 may differ from SARS or MERS. We summarize latest literatures on genetic, epidemiological, and clinical features of COVID-19 in comparison to SARS and MERS and emphasize special measures on diagnosis and potential interventions. This review will improve our understanding of the unique features of COVID-19 and enhance our control measures in the future.

https://onlinelibrary.wiley.com/doi/epdf/10.1002/jmv.25748

Unique epidemiological and clinical features of the emerging 2019 novel coronavirus pneumonia (COVID-19) implicate special control measures.

A review of techniques, advances and outstanding issues in numerical modelling for rock mechanics and rock engineering

The Mohr–Coulomb (M–C) fracture criterion is revisited with an objective of describing ductile fracture of isotropic crack-free solids. This criterion has been extensively used in rock and soil mechanics as it correctly accounts for the effects of hydrostatic pressure as well as the Lode angle parameter. It turns out that these two parameters, which are critical for characterizing fracture of geo-materials, also control fracture of ductile metals (Bai and Wierzbicki 2008; Xue 2007; Barsoum 2006; Wilkins et al. 1980). The local form of the M–C criterion is transformed/extended to the spherical coordinate system, where the axes are the equivalent strain to fracture $${\bar \varepsilon_f}$$
 , the stress triaxiality η, and the normalized Lode angle parameter $${\bar \theta}$$
 . For a proportional loading, the fracture surface is shown to be an asymmetric function of $${\bar \theta}$$
 . A detailed parametric study is performed to demonstrate the effect of model parameters on the fracture locus. It was found that the M–C fracture locus predicts almost exactly the exponential decay of the material ductility with stress triaxiality, which is in accord with theoretical analysis of Rice and Tracey (1969) and the empirical equation of Hancock and Mackenzie (1976), Johnson and Cook (1985). The M–C criterion also predicts a form of Lode angle dependence which is close to parabolic. Test results of two materials, 2024-T351 aluminum alloy and TRIP RA-K40/70 (TRIP690) high strength steel sheets, are used to calibrate and validate the proposed M–C fracture model. Another advantage of the M–C fracture model is that it predicts uniquely the orientation of the fracture surface. It is shown that the direction cosines of the unit normal vector to the fracture surface are functions of the “friction” coefficient in the M–C criterion. The phenomenological and physical sound M–C criterion has a great potential to be used as an engineering tool for predicting ductile fracture.

Application of extended Mohr–Coulomb criterion to ductile fracture

The purpose of this review is to discuss the development and the state of the art in dynamic testing techniques and dynamic mechanical behaviour of rock materials. The review begins by briefly introducing the history of rock dynamics and explaining the significance of studying these issues. Loading techniques commonly used for both intermediate and high strain rate tests and measurement techniques for dynamic stress and deformation are critically assessed in Sects. 2 and 3. In Sect. 4, methods of dynamic testing and estimation to obtain stress–strain curves at high strain rate are summarized, followed by an in-depth description of various dynamic mechanical properties (e.g. uniaxial and triaxial compressive strength, tensile strength, shear strength and fracture toughness) and corresponding fracture behaviour. Some influencing rock structural features (i.e. microstructure, size and shape) and testing conditions (i.e. confining pressure, temperature and water saturation) are considered, ending with some popular semi-empirical rate-dependent equations for the enhancement of dynamic mechanical properties. Section 5 discusses physical mechanisms of strain rate effects. Section 6 describes phenomenological and mechanically based rate-dependent constitutive models established from the knowledge of the stress–strain behaviour and physical mechanisms. Section 7 presents dynamic fracture criteria for quasi-brittle materials. Finally, a brief summary and some aspects of prospective research are presented.

/pdf/a-review-of-dynamic-experimental-techniques-and-mechanical-2kstp2wfg4.pdf

A Review of Dynamic Experimental Techniques and Mechanical Behaviour of Rock Materials

Availability and access to fresh and safe drinking water is a precondition for life. Freshwater resources are rainwater collected on the ground and groundwater collected at various depths below the ground surface. In open reservoirs the drinking water is exposed to the influence of sunlight and pollution from the air. In arid regions a great proportion of water evaporates from surface open reservoirs. Today, open reservoirs for the storage of drinking water are not normally acceptable to health authorities. They have to construct closed tanks of some kind. Various ways of recharging and storing water underground are discussed.

Jian Zhao

Papers

Underground Storage of Water

Different Analytical Models and Methods to Study Wave Propagation Across Rock Joints

An experimental study on mechanical behaviour of siltstone under brine saturation

Experimental and Numerical Investigations of Cerchar Scratching Rock Interaction

Evaluation of soil abrasivity for soft ground TBM tunnelling applications