Multiple-input multiple-output (MIMO) technology is maturing and is being incorporated into emerging wireless broadband standards like long-term evolution (LTE) [1]. For example, the LTE standard allows for up to eight antenna ports at the base station. Basically, the more antennas the transmitter/receiver is equipped with, and the more degrees of freedom that the propagation channel can provide, the better the performance in terms of data rate or link reliability. More precisely, on a quasi static channel where a code word spans across only one time and frequency coherence interval, the reliability of a point-to-point MIMO link scales according to Prob(link outage) ` SNR-ntnr where nt and nr are the numbers of transmit and receive antennas, respectively, and signal-to-noise ratio is denoted by SNR. On a channel that varies rapidly as a function of time and frequency, and where circumstances permit coding across many channel coherence intervals, the achievable rate scales as min(nt, nr) log(1 + SNR). The gains in multiuser systems are even more impressive, because such systems offer the possibility to transmit simultaneously to several users and the flexibility to select what users to schedule for reception at any given point in time [2].

/pdf/scaling-up-mimo-opportunities-and-challenges-with-very-large-puqp9v7gzk.pdf

Scaling Up MIMO: Opportunities and Challenges with Very Large Arrays

Thank you very much for downloading table of integrals series and products. Maybe you have knowledge that, people have look hundreds times for their chosen books like this table of integrals series and products, but end up in harmful downloads. Rather than reading a good book with a cup of coffee in the afternoon, instead they cope with some harmful virus inside their laptop. table of integrals series and products is available in our book collection an online access to it is set as public so you can get it instantly. Our book servers saves in multiple locations, allowing you to get the most less latency time to download any of our books like this one. Merely said, the table of integrals series and products is universally compatible with any devices to read.

Table Of Integrals Series And Products

Information Theory and Reliable Communication

The objective of this paper is to give a comprehensive introduction to applied cryptography with an engineer or computer scientist in mind. The emphasis is on the knowledge needed to create practical systems which supports integrity, confidentiality, or authenticity. Topics covered includes an introduction to the concepts in cryptography, attacks against cryptographic systems, key use and handling, random bit generation, encryption modes, and message authentication codes. Recommendations on algorithms and further reading is given in the end of the paper. This paper should make the reader able to build, understand and evaluate system descriptions and designs based on the cryptographic components described in the paper.

[서평]「Applied Cryptography」

The presence of both multiple-access interference (MAI) and intersymbol interference (ISI) constitutes a major impediment to reliable communications in multipath code-division multiple-access (CDMA) channels. In this paper, an iterative receiver structure is proposed for decoding multiuser information data in a convolutionally coded asynchronous multipath DS-CDMA system. The receiver performs two successive soft-output decisions, achieved by a soft-input soft-output (SISO) multiuser detector and a bank of single-user SISO channel decoders, through an iterative process. At each iteration, extrinsic information is extracted from detection and decoding stages and is then used as a priori information in the next iteration, just as in turbo decoding. Given the multipath CDMA channel model, a direct implementation of a sliding-window SISO multiuser detector has a prohibitive computational complexity. A low-complexity SISO multiuser detector is developed based on a novel nonlinear interference suppression technique, which makes use of both soft interference cancellation and instantaneous linear minimum mean-square error filtering. The properties of such a nonlinear interference suppressor are examined, and an efficient recursive implementation is derived. Simulation results demonstrate that the proposed low complexity iterative receiver structure for interference suppression and decoding offers significant performance gain over the traditional noniterative receiver structure. Moreover, at high signal-to-noise ratio, the detrimental effects of MAI and ISI in the channel can almost be completely overcome by iterative processing, and single-user performance can be approached.

/pdf/iterative-turbo-soft-interference-cancellation-and-decoding-4ha12irymu.pdf

Iterative (turbo) soft interference cancellation and decoding for coded CDMA

The authors propose a method for the reduction of peak-to-average transmit power ratio of multicarrier modulation systems, called selected mapping, is presented, which is appropriate for a wide range of applications. Significant gains can be achieved by selected mapping whereas complexity remains quite moderate.

Reducing the peak-to-average power ratio of multicarrier modulation by selected mapping

The authors propose a very effective and flexible peak power reduction scheme for orthogonal frequency division multiplexing (OFDM) with almost vanishing redundancy. This new method works with arbitrary numbers of subcarriers and unconstrained signal sets. The core of the proposal is to combine partial transmit sequences (PTS) to minimise the peak-to-average power ratio distortion.

OFDM with reduced peak-to-average power ratio by optimum combination of partial transmit sequences

This paper deals with 2/sup l/-ary transmission using multilevel coding (MLC) and multistage decoding (MSD). The known result that MLC and MSD suffice to approach capacity if the rates at each level are appropriately chosen is reviewed. Using multiuser information theory, it is shown that there is a large space of rate combinations such that MLC and full maximum-likelihood decoding (MLD) can approach capacity. It is noted that multilevel codes designed according to the traditional balanced distance rule tend to fall in the latter category and, therefore, require the huge complexity of MLD. The capacity rule, the balanced distances rules, and two other rules based on the random coding exponent and cutoff rate are compared and contrasted for practical design. Simulation results using multilevel binary turbo codes show that capacity can in fact be closely approached at high bandwidth efficiencies. Moreover, topics relevant in practical applications such as signal set labeling, dimensionality of the constituent constellation, and hard-decision decoding are emphasized. Bit interleaved coded modulation, proposed by Caire et al. (see ibid., vol.44, p.927-46, 1998), is reviewed in the context of MLC. Finally, the combination of signal shaping and coding is discussed. Significant shaping gains are achievable in practice only if these design rules are taken into account.

/pdf/multilevel-codes-theoretical-concepts-and-practical-design-5ec1khobkg.pdf

Multilevel codes: theoretical concepts and practical design rules

In this paper, Tomlinson-Harashima Precoding for multiple-input/multiple-output systems including multiple-antenna and multiuser systems is studied. It is shown that nonlinear preequalization offers significant advantages over linear preequalization which increases average transmit power. Moreover, it outperforms decision-feedback equalization at the receiver side which is applicable if joint processing at the receiver side is possible, and which suffers from error propagation. A number of aspects of practical importance are studied. Loading, i.e., the optimum distribution of transmit power and rate is discussed in detail. It is shown that the capacity of the underlying MIMO channel can be utilized asymptotically by means of nonlinear precoding.

Precoding in multiantenna and multiuser communications

A new loading algorithm for discrete multitone transmission is proposed. Thereby rate is not distributed according to channel capacity, but rate and transmit power are assigned to maximize the signal-to-noise ratio in each carrier. Because closed form expressions can be derived the algorithm is of very low complexity, even lower than the loading algorithm recently proposed by Chow et al. (see IEEE Transactions on Communications, no.2/3/4, p.773-5, 1995). Nevertheless achievable performance is higher or at least the same. Results for a typical high rate transmission over twisted pair lines are presented.

Johannes B. Huber

Papers

Reducing the peak-to-average power ratio of multicarrier modulation by selected mapping

OFDM with reduced peak-to-average power ratio by optimum combination of partial transmit sequences

Multilevel codes: theoretical concepts and practical design rules

Precoding in multiantenna and multiuser communications

A new loading algorithm for discrete multitone transmission