This paper presents a review of the experimental achievements related to the development of high-power gyrotron oscillators for long-pulse or CW operation and pulsed gyrotrons for many applications. In addition, this work gives a short overview on the present development status of frequency step-tunable and multi-frequency gyrotrons, coaxial-cavity multi-megawatt gyrotrons, gyrotrons for technological and spectroscopy applications, relativistic gyrotrons, large orbit gyrotrons (LOGs), quasi-optical gyrotrons, fast- and slow-wave cyclotron autoresonance masers (CARMs), gyroklystrons, gyro-TWT amplifiers, gyrotwystron amplifiers, gyro-BWOs, gyro-harmonic converters, gyro-peniotrons, magnicons, free electron masers (FEMs), and dielectric vacuum windows for such high-power mm-wave sources. Gyrotron oscillators (gyromonotrons) are mainly used as high-power millimeter wave sources for electron cyclotron resonance heating (ECRH), electron cyclotron current drive (ECCD), stability control, and diagnostics of magnetically confined plasmas for clean generation of energy by controlled thermonuclear fusion. The maximum pulse length of commercially available 140 GHz, megawatt-class gyrotrons employing synthetic diamond output windows is 30 min (CPI and European KIT-SPC-THALES collaboration). The world record parameters of the European tube are as follows: 0.92 MW output power at 30-min pulse duration, 97.5% Gaussian mode purity, and 44% efficiency, employing a single-stage depressed collector (SDC) for energy recovery. A maximum output power of 1.5 MW in 4.0-s pulses at 45% efficiency was generated with the QST-TOSHIBA (now CANON) 110-GHz gyrotron. The Japan 170-GHz ITER gyrotron achieved 1 MW, 800 s at 55% efficiency and holds the energy world record of 2.88 GJ (0.8 MW, 60 min) and the efficiency record of 57% for tubes with an output power of more than 0.5 MW. The Russian 170-GHz ITER gyrotron obtained 0.99 (1.2) MW with a pulse duration of 1000 (100) s and 53% efficiency. The prototype tube of the European 2-MW, 170-GHz coaxial-cavity gyrotron achieved in short pulses the record power of 2.2 MW at 48% efficiency and 96% Gaussian mode purity. Gyrotrons with pulsed magnet for various short-pulse applications deliver Pout = 210 kW with τ = 20 μs at frequencies up to 670 GHz (η ≅ 20%), Pout = 5.3 kW at 1 THz (η = 6.1%), and Pout = 0.5 kW at 1.3 THz (η = 0.6%). Gyrotron oscillators have also been successfully used in materials processing. Such technological applications require tubes with the following parameters: f > 24 GHz, Pout = 4–50 kW, CW, η > 30%. The CW powers produced by gyroklystrons and FEMs are 10 kW (94 GHz) and 36 W (15 GHz), respectively. The IR FEL at the Thomas Jefferson National Accelerator Facility in the USA obtained a record average power of 14.2 kW at a wavelength of 1.6 μm. The THz FEL (NOVEL) at the Budker Institute of Nuclear Physics in Russia achieved a maximum average power of 0.5 kW at wavelengths 50–240 μm (6.00–1.25 THz).

/pdf/state-of-the-art-of-high-power-gyro-devices-and-free-5avfirj4z9.pdf

State-of-the-Art of High-Power Gyro-Devices and Free Electron Masers

In this review we give an overview of the present status of research on carbon nanotube (CNT) field emitters and their applications. Several different construction principles of field-emission devices with CNTs are summarized. The emission mechanism is introduced and a detailed overview is given of the measured emission properties and related topics of CNT electron sources. We give also several examples of field-emission devices with CNT electron emitters that are presently being investigated in the academic world as well as in industry. Carbon nanotube electron sources clearly have interesting properties, such as low voltage operation, good stability, long lifetime and high brightness. The most promising applications are the field-emission display and high-resolution electron-beam instruments. But several hurdles remain, such as the manufacture of an electron source or an array of electron sources with exactly the desired properties in a reproducible manner.

/pdf/carbon-nanotube-electron-sources-and-applications-f80dqnkicj.pdf

Carbon nanotube electron sources and applications

Do you design and build vacuum electron devices, or work with the systems that use them? Quickly develop a solid understanding of how these devices work with this authoritative guide, written by an author with over fifty years of experience in the field. Rigorous in its approach, it focuses on the theory and design of commercially significant types of gridded, linear-beam, crossed-field and fast-wave tubes. Essential components such as waveguides, resonators, slow-wave structures, electron guns, beams, magnets and collectors are also covered, as well as the integration and reliable operation of devices in microwave and RF systems. Complex mathematical analysis is kept to a minimum, and Mathcad worksheets supporting the book online aid understanding of key concepts and connect the theory with practice. Including coverage of primary sources and current research trends, this is essential reading for researchers, practitioners and graduate students working on vacuum electron devices.

Microwave and RF Vacuum Electronic Power Sources

This report gives an update of the worldwide experimental achievements in the development of long-pulse gyrotron oscillators for fusion plasma heating, plasma diagnostics and materials processing. In addition, this work gives a short overview of the present development status of coaxial-cavity multi-megawatt gyrotrons, gyrotrons for technological and spectroscopy applications, relativistic gyrotrons, quasi-optical gyrotrons, cyclotron autoresonance masers, gyro-amplifiers, gyro-BWO's, free electron masers and of vacuum windows for such high-power mm-wave sources.

/pdf/state-of-the-art-of-high-power-gyro-devices-and-free-1mmeiw5vph.pdf

State-of-the-Art of High Power Gyro-Devices and Free Electron Masers. Update 2011. (KIT Scientific Reports ; 7606)

The paper describes the oscillation characteristics of cyclotron high-harmonic peniotrons based on space harmonic interactions in magnetron waveguide resonators. The experimental results showed extremely high electronic efficiencies of 75% for the cyclotron third harmonic and 6% for the tenth harmonic at 30 and 100 GHz, respectively. It was proven that almost all of the rotational energy of the beam is transferred to that of an electromagnetic wave and the efficiency of 75% at the cyclotron third harmonic corresponds to the effective efficiency of 92% by the energy recovery of the spent electrons at the depressed potential collector.

Highly efficient operation of space harmonic peniotron at cyclotron high harmonics

The auto-resonant peniotron has been theoretically expected to have a very high conversion efficiency (nearly 100%) for an ideal electron beam with an appropriate value for the velocity ratio interacting in a suitable circuit with an electromagnetic wave whose phase velocity is equal to the velocity of light in free space. This paper presents experimental results showing more than 70% electronic efficiency obtained from an auto-resonant peniotron oscillator with a magnetron type cavity.

Experiments on highly efficient operation of the auto-resonant peniotron oscillator

The paper describes both simulated and experimental results observed in high cyclotron harmonic peniotron oscillators with magnetron waveguide resonators and discusses the operation modes of the oscillation. We made the modes clear by considering interactions between an axis encircling electron beam and the space harmonic components of the respective modes generated in the magnetron waveguides. To make it possible to operated at higher frequencies, we introduced a new concept for designing high cyclotron harmonic tubes based on a space harmonic of the 2 /spl pi/ mode interaction. We then presented design parameters for a number of peniotron tubes operable up to 300 GHz with relatively low magnetic field.

K. Sagae

Papers

Highly efficient operation of space harmonic peniotron at cyclotron high harmonics

Experiments on highly efficient operation of the auto-resonant peniotron oscillator

Space harmonic peniotron in a magnetron waveguide resonator

Design and experiments of higher cyclotron harmonic peniotron oscillators

Efficient operation of high harmonic peniotron in millimeter wave region