A multiplicity of autonomous terminals simultaneously transmits data streams to a compact array of antennas. The array uses imperfect channel-state information derived from transmitted pilots to extract the individual data streams. The power radiated by the terminals can be made inversely proportional to the square-root of the number of base station antennas with no reduction in performance. In contrast if perfect channel-state information were available the power could be made inversely proportional to the number of antennas. Lower capacity bounds for maximum-ratio combining (MRC), zero-forcing (ZF) and minimum mean-square error (MMSE) detection are derived. An MRC receiver normally performs worse than ZF and MMSE. However as power levels are reduced, the cross-talk introduced by the inferior maximum-ratio receiver eventually falls below the noise level and this simple receiver becomes a viable option. The tradeoff between the energy efficiency (as measured in bits/J) and spectral efficiency (as measured in bits/channel use/terminal) is quantified for a channel model that includes small-scale fading but not large-scale fading. It is shown that the use of moderately large antenna arrays can improve the spectral and energy efficiency with orders of magnitude compared to a single-antenna system.

/pdf/energy-and-spectral-efficiency-of-very-large-multiuser-mimo-4ksk4lv9wl.pdf

Energy and Spectral Efficiency of Very Large Multiuser MIMO Systems

We consider the uplink (UL) and downlink (DL) of non-cooperative multi-cellular time-division duplexing (TDD) systems, assuming that the number N of antennas per base station (BS) and the number K of user terminals (UTs) per cell are large. Our system model accounts for channel estimation, pilot contamination, and an arbitrary path loss and antenna correlation for each link. We derive approximations of achievable rates with several linear precoders and detectors which are proven to be asymptotically tight, but accurate for realistic system dimensions, as shown by simulations. It is known from previous work assuming uncorrelated channels, that as N→∞ while K is fixed, the system performance is limited by pilot contamination, the simplest precoders/detectors, i.e., eigenbeamforming (BF) and matched filter (MF), are optimal, and the transmit power can be made arbitrarily small. We analyze to which extent these conclusions hold in the more realistic setting where N is not extremely large compared to K. In particular, we derive how many antennas per UT are needed to achieve η% of the ultimate performance limit with infinitely many antennas and how many more antennas are needed with MF and BF to achieve the performance of minimum mean-square error (MMSE) detection and regularized zero-forcing (RZF), respectively.

/pdf/massive-mimo-in-the-ul-dl-of-cellular-networks-how-many-3p7iytxwbh.pdf

Massive MIMO in the UL/DL of Cellular Networks: How Many Antennas Do We Need?

A multiplicity of autonomous terminals simultaneously transmits data streams to a compact array of antennas. The array uses imperfect channel-state information derived from transmitted pilots to extract the individual data streams. The power radiated by the terminals can be made inversely proportional to the square-root of the number of base station antennas with no reduction in performance. In contrast if perfect channel-state information were available the power could be made inversely proportional to the number of antennas. Lower capacity bounds for maximum-ratio combining (MRC), zero-forcing (ZF) and minimum mean-square error (MMSE) detection are derived. A MRC receiver normally performs worse than ZF and MMSE. However as power levels are reduced, the cross-talk introduced by the inferior maximum-ratio receiver eventually falls below the noise level and this simple receiver becomes a viable option. The tradeoff between the energy efficiency (as measured in bits/J) and spectral efficiency (as measured in bits/channel use/terminal) is quantified. It is shown that the use of moderately large antenna arrays can improve the spectral and energy efficiency with orders of magnitude compared to a single-antenna system.

This paper presents an overview of the theory and currently known techniques for multi-cell MIMO (multiple input multiple output) cooperation in wireless networks. In dense networks where interference emerges as the key capacity-limiting factor, multi-cell cooperation can dramatically improve the system performance. Remarkably, such techniques literally exploit inter-cell interference by allowing the user data to be jointly processed by several interfering base stations, thus mimicking the benefits of a large virtual MIMO array. Multi-cell MIMO cooperation concepts are examined from different perspectives, including an examination of the fundamental information-theoretic limits, a review of the coding and signal processing algorithmic developments, and, going beyond that, consideration of very practical issues related to scalability and system-level integration. A few promising and quite fundamental research avenues are also suggested.

/pdf/multi-cell-mimo-cooperative-networks-a-new-look-at-1e6uuxtyow.pdf

Multi-Cell MIMO Cooperative Networks: A New Look at Interference

It is now well known that employing channel adaptive signaling in wireless communication systems can yield large improvements in almost any performance metric. Unfortunately, many kinds of channel adaptive techniques have been deemed impractical in the past because of the problem of obtaining channel knowledge at the transmitter. The transmitter in many systems (such as those using frequency division duplexing) can not leverage techniques such as training to obtain channel state information. Over the last few years, research has repeatedly shown that allowing the receiver to send a small number of information bits about the channel conditions to the transmitter can allow near optimal channel adaptation. These practical systems, which are commonly referred to as limited or finite-rate feedback systems, supply benefits nearly identical to unrealizable perfect transmitter channel knowledge systems when they are judiciously designed. In this tutorial, we provide a broad look at the field of limited feedback wireless communications. We review work in systems using various combinations of single antenna, multiple antenna, narrowband, broadband, single-user, and multiuser technology. We also provide a synopsis of the role of limited feedback in the standardization of next generation wireless systems.

/pdf/an-overview-of-limited-feedback-in-wireless-communication-1njp2bb1kz.pdf

An overview of limited feedback in wireless communication systems

In this paper, we consider a multiple-input-multiple-output (MIMO) fading broadcast channel and compute achievable ergodic rates when channel state information (CSI) is acquired at the receivers via downlink training and it is provided to the transmitter by channel state feedback. Unquantized (analog) and quantized (digital) channel state feedback schemes are analyzed and compared under various assumptions. Digital feedback is shown to be potentially superior when the feedback channel uses per channel state coefficient is larger than 1. Also, we show that by proper design of the digital feedback link, errors in the feedback have a minor effect even if simple uncoded modulation is used on the feedback channel. We discuss first the case of an unfaded additive white Gaussian noise (AWGN) feedback channel with orthogonal access and then the case of fading MIMO multiple access (MIMO-MAC). We show that by exploiting the MIMO-MAC nature of the uplink channel, a much better scaling of the feedback channel resource with the number of base station (BS) antennas can be achieved. Finally, for the case of delayed feedback, we show that in the realistic case where the fading process has (normalized) maximum Doppler frequency shift 0 ? F < 1/2, a fraction 1 - 2F of the optimal multiplexing gain is achievable. The general conclusion of this work is that very significant downlink throughput is achievable with simple and efficient channel state feedback, provided that the feedback link is properly designed.

/pdf/multiuser-mimo-achievable-rates-with-downlink-training-and-3wsje5js4s.pdf

Multiuser MIMO Achievable Rates With Downlink Training and Channel State Feedback

The exponentially increasing demand for wireless data services requires a massive network densification that is neither economically nor ecologically viable with the current cellular system architectures. A promising solution to this problem is the concept of small-cell networks (SCNs), which is founded by the idea of a very dense deployment of self-organizing, low-cost, low-power, base stations (BSs). Although SCNs have the potential to significantly increase the capacity of cellular networks while reducing their energy consumption, they pose many new challenges to the optimal system design. We show in this article how a large system analysis based on random matrix theory (RMT) can provide tight and tractable approximations of key performance measures of SCNs.

Green Small-Cell Networks

We consider the time correlated multiple-input single-output (MISO) broadcast channel where the transmitter has imperfect knowledge of the current channel state, in addition to delayed channel state information. By representing the quality of the current channel state information as P-α for the signal-to-noise ratio P and some constant α ≥ 0, we characterize the optimal degrees of freedom region for this more general two-user MISO broadcast correlated channel. The essential ingredients of the proposed scheme lie in the quantization and multicast of the overheard interferences, while broadcasting new private messages. Our proposed scheme smoothly bridges between the scheme recently proposed by Maddah-Ali and Tse with no current state information and a simple zero-forcing beamforming with perfect current state information.

Degrees of Freedom of Time Correlated MISO Broadcast Channel With Delayed CSIT

We consider a MIMO fading broadcast channel where the fading channel coefficients are constant over time-frequency blocks that span a coherent time x a coherence bandwidth. In closed-loop systems, channel state information at transmitter (CSIT) is acquired by the downlink training sent by the base station and an explicit feedback from each user terminal. In open-loop systems, CSIT is obtained by exploiting uplink training and channel reciprocity. We use closed-form lower bounds and tight approximations of the ergodic achievable rate in the presence of CSIT errors in order to optimize the overall system throughput, by taking explicitly into account the overhead due to channel estimation and channel state feedback. Based on three time-frequency block models inspired by actual systems, we provide useful guidelines for the overall system optimization. In particular, digital (quantized) feedback is found to offer a substantial advantage over analog (unquantized) feedback.

Training and Feedback Optimization for Multiuser MIMO Downlink

We consider a joint radar parameter estimation and communication system using orthogonal time frequency space (OTFS) modulation. The scenario is motivated by vehicular applications where a vehicle (or the infrastructure) equipped with a mono-static radar wishes to communicate data to its target receiver, while estimating parameters of interest related to this receiver. Provided that the radar-equipped transmitter is ready to send data to its target receiver, this setting naturally assumes that the receiver has been already detected. In a point-to-point communication setting over multipath time-frequency selective channels, we study the joint radar and communication system from two perspectives, i.e., the radar parameter estimation at the transmitter as well as the data detection at the receiver. For the radar parameter estimation part, we derive an efficient approximated Maximum Likelihood algorithm and the corresponding Cramer-Rao lower bound for range and velocity estimation. Numerical examples demonstrate that multi-carrier digital formats such as OTFS can achieve as accurate radar estimation as state-of-the-art radar waveforms such as frequency-modulated continuous wave (FMCW). For the data detection part, we focus on separate detection and decoding and consider a soft-output detector that exploits efficiently the channel sparsity in the Doppler-delay domain. We quantify the detector performance in terms of its pragmatic capacity , i.e., the achievable rate of the channel induced by the signal constellation and the detector soft-output. Simulations show that the proposed scheme outperforms concurrent state-of-the-art solutions. Overall, our work shows that a suitable digitally modulated waveform enables to efficiently operate joint radar parameter estimation and communication by achieving full information rate of the modulation and near-optimal radar estimation performance. Furthermore, OTFS appears to be particularly suited to the scope.

Mari Kobayashi

Papers

Multiuser MIMO Achievable Rates With Downlink Training and Channel State Feedback

Green Small-Cell Networks

Degrees of Freedom of Time Correlated MISO Broadcast Channel With Delayed CSIT

Training and Feedback Optimization for Multiuser MIMO Downlink

On the Effectiveness of OTFS for Joint Radar Parameter Estimation and Communication