Many potential applications have been proposed for carbon nanotubes, including conductive and high-strength composites; energy storage and energy conversion devices; sensors; field emission displays and radiation sources; hydrogen storage media; and nanometer-sized semiconductor devices, probes, and interconnects. Some of these applications are now realized in products. Others are demonstrated in early to advanced devices, and one, hydrogen storage, is clouded by controversy. Nanotube cost, polydispersity in nanotube type, and limitations in processing and assembly methods are important barriers for some applications of single-walled nanotubes.

http://science.sciencemag.org/content/sci/297/5582/787.full.pdf

Carbon Nanotubes--the Route Toward Applications

The interest in nanoscale materials stems from the fact that new properties are acquired at this length scale and, equally important, that these properties * To whom correspondence should be addressed. Phone, 404-8940292; fax, 404-894-0294; e-mail, mostafa.el-sayed@ chemistry.gatech.edu. † Case Western Reserve UniversitysMillis 2258. ‡ Phone, 216-368-5918; fax, 216-368-3006; e-mail, burda@case.edu. § Georgia Institute of Technology. 1025 Chem. Rev. 2005, 105, 1025−1102

Chemistry and properties of nanocrystals of different shapes.

Diamond-like carbon (DLC) is a metastable form of amorphous carbon with significant sp3 bonding. DLC is a semiconductor with a high mechanical hardness, chemical inertness, and optical transparency. This review will describe the deposition methods, deposition mechanisms, characterisation methods, electronic structure, gap states, defects, doping, luminescence, field emission, mechanical properties and some applications of DLCs. The films have widespread applications as protective coatings in areas, such as magnetic storage disks, optical windows and micro-electromechanical devices (MEMs).

/pdf/diamond-like-amorphous-carbon-3pczopr0z7.pdf

Diamond-like amorphous carbon

https://www.bc.edu/content/dam/files/schools/cas_sites/physics/pdf/Ren/p85.pdf

Advances in the science and technology of carbon nanotubes and their composites: a review

The synthesis of massive arrays of monodispersed carbon nanotubes that are self-oriented on patterned porous silicon and plain silicon substrates is reported. The approach involves chemical vapor deposition, catalytic particle size control by substrate design, nanotube positioning by patterning, and nanotube self-assembly for orientation. The mechanisms of nanotube growth and self-orientation are elucidated. The well-ordered nanotubes can be used as electron field emission arrays. Scaling up of the synthesis process should be entirely compatible with the existing semiconductor processes, and should allow the development of nanotube devices integrated into silicon technology.

https://science.sciencemag.org/content/sci/283/5401/512.full.pdf

Self-Oriented Regular Arrays of Carbon Nanotubes and Their Field Emission Properties

Free-standing aligned carbon nanotubes have previously been grown above 700°C on mesoporous silica embedded with iron nanoparticles. Here, carbon nanotubes aligned over areas up to several square centimeters were grown on nickel-coated glass below 666°C by plasma-enhanced hot filament chemical vapor deposition. Acetylene gas was used as the carbon source and ammonia gas was used as a catalyst and dilution gas. Nanotubes with controllable diameters from 20 to 400 nanometers and lengths from 0.1 to 50 micrometers were obtained. Using this method, large panels of aligned carbon nanotubes can be made under conditions that are suitable for device fabrication.

/pdf/synthesis-of-large-arrays-of-well-aligned-carbon-nanotubes-4ejraz4cql.pdf

Synthesis of Large Arrays of Well-Aligned Carbon Nanotubes on Glass

Highly-oriented, multi-walled carbon nanotubes were grown on polished polycrystalline and single crystal nickel substrates by plasma enhanced hot filament chemical vapor deposition at temperatures below 666"C. The carbon nanotubes range from 10 to 500 nm in diameter and 0.1 to 50 pm in length depending on growth conditions. Acetylene is used as the carbon source for the growth of the carbon nanotubes and ammonia is used for dilution gas and catalysis. The plasma intensity, acetylene to ammonia gas ratio and their flow rates, etc. affect the diameters and uniformity of the carbon nanotubes. In summary, we synthesized large-area highly-oriented carbon nanotubes at temperatures below 666C by plasma-enhanced hot filament chemical vapor deposition. Acetylene gas is used to provide carbon for nanotube growth and ammonia gas is used for dilution and catalysis. Plasma intensity is critical in determining the nanotube aspect ratios (diameter and length), and range of both site and height distributions within a given film.

/pdf/growth-of-highly-oriented-carbon-nanotubes-by-plasma-zbgbd2331x.pdf

Growth of Highly-Oriented Carbon Nanotubes by Plasma-Enhanced Hot Filament Chemical Vapor Deposition

Epitaxial thin films of Ba2YCu3O7−x (BYC) were prepared on (001) LaAlO3 single‐crystal substrates by metalorganic deposition of metal trifluoroacetate precursors. This is an ex situ process that requires high‐temperature annealing in a humid atmosphere to produce stoichiometric BYC thin films. The chemically derived superconducting films were found to have high critical temperatures and high current densities when crystallized under low‐oxygen partial pressures. Superconducting films of 70 nm thickness with zero‐field critical current densities greater than 5×106 A/cm2 at 77 K and zero resistance at 92 K were prepared by annealing at 780 and 830 °C in 2.5 × 10−4–1 × 10−3 atm oxygen furnace atmospheres. As the film thickness was increased, the superconducting properties and surface smoothness of the films tended to degrade. This behavior was consistent with a microstructural model in which the films are composed of a dense slab of c‐axis normal BYC near the film/substrate interface with the overlying mater...

Effect of growth conditions on the properties and morphology of chemically derived epitaxial thin films of Ba2YCu3O7−x on (001) LaAlO3

The thermal stability of diamond-like carbon

The thermal stability in vacuum of amorphous tetrahedrally coordinated carbon (a‐tC) films grown on Si has been assessed by in situ Raman spectroscopy. Films were grown in vacuum on room‐temperature substrates using laser fluences of 12, 22, and 45 J/cm2 and in a background gas of either hydrogen or nitrogen using a laser fluence of 45 J/cm2. The films grown in vacuum at high fluence (≳20J/cm2) show little change in the a‐tC Raman spectra with temperature up to 800 °C. Above this temperature the films convert to glassy carbon (nanocrystalline graphite). Samples grown in vacuum at lower fluence or in a background gas (H2 or N2) at high fluence are not nearly as stable. For all samples, the Raman signal from the Si substrate (observed through the a‐tC film) decreases in intensity with annealing temperature indicating that the transparency of the a‐tC films is decreasing with temperature. These changes in transparency begin at much lower temperatures (∼200 °C) than the changes in the a‐tC Raman band shape an...

Michael P. Siegal

Papers

Synthesis of Large Arrays of Well-Aligned Carbon Nanotubes on Glass

Growth of Highly-Oriented Carbon Nanotubes by Plasma-Enhanced Hot Filament Chemical Vapor Deposition

Effect of growth conditions on the properties and morphology of chemically derived epitaxial thin films of Ba2YCu3O7−x on (001) LaAlO3

The thermal stability of diamond-like carbon

Thermal stability of amorphous carbon films grown by pulsed laser deposition