Thank you very much for downloading biomechanics and motor control of human movement. Maybe you have knowledge that, people have search hundreds times for their favorite books like this biomechanics and motor control of human movement, but end up in infectious downloads. Rather than enjoying a good book with a cup of tea in the afternoon, instead they juggled with some malicious virus inside their laptop.

Biomechanics And Motor Control Of Human Movement

2008 Special issue

Locking devices are widely used in robotics, for instance to lock springs and joints or to reconfigure robots. This review article classifies the locking devices currently described in the literature and performs a comparative study. Designers can therefore better determine which locking device best matches the needs of their application. The locking devices are divided into three main categories based on different locking principles: 1) mechanical locking, 2) friction-based locking, and 3) singularity locking. Different locking devices in each category can be passive or active. Based on an extensive literature survey, this article summarizes the findings by comparing different locking devices on a set of properties of an ideal locking device.

https://biblio.vub.ac.be/vubirfiles/26793095/201504_lockingdevices.pdf

Lock Your Robot: A Review of Locking Devices in Robotics

We introduce DextrES, a flexible and wearable haptic glove which integrates both kinesthetic and cutaneous feedback in a thin and light form factor (weight is less than 8g). Our approach is based on an electrostatic clutch generating up to 20 N of holding force on each finger by modulating the electrostatic attraction between flexible elastic metal strips to generate an electrically-controlled friction force. We harness the resulting braking force to rapidly render on-demand kinesthetic feedback. The electrostatic brake is mounted onto the the index finger and thumb via modular 3D printed articulated guides which allow the metal strips to glide smoothly. Cutaneous feedback is provided via piezo actuators at the fingertips. We demonstrate that our approach can provide rich haptic feedback under dexterous articulation of the user's hands and provides effective haptic feedback across a variety of different grasps. A controlled experiment indicates that DextrES improves the grasping precision for different types of virtual objects. Finally, we report on results of a psycho-physical study which identifies discrimination thresholds for different levels of holding force.

DextrES: Wearable Haptic Feedback for Grasping in VR via a Thin Form-Factor Electrostatic Brake

Clutches can be used to enhance the functionality of springs or actuators in robotic devices. Here we describe a lightweight, low-power clutch used to control spring engagement in an ankle exoskeleton. The clutch is based on electrostatic adhesion between thin electrode sheets coated with a dielectric material. Each electrode pair weighs 1.5 g, bears up to 100 N, and changes states in less than 30 ms. We placed clutches in series with elastomer springs to allow control of spring engagement, and placed several clutched springs in parallel to discretely adjust stiffness. By engaging different numbers of springs, the system produced six different levels of stiffness. Force at peak displacement ranged from 14 to 501 N, and the device returned 95% of stored mechanical energy. Each clutched spring element weighed 26 g. We attached one clutched spring to an ankle exoskeleton and used it to engage the spring only while the foot was on the ground during 150 consecutive walking steps. Peak torque was 7.3 N·m on an average step, and the device consumed 0.6 mW of electricity. Compared to other electrically-controllable clutches, this approach results in three times higher torque density and two orders of magnitude lower power consumption per unit torque. We anticipate this technology will be incorporated into exoskeletons that tune stiffness online and into new actuator designs that utilize many lightweight, low-power clutches acting in concert.

A lightweight, low-power electroadhesive clutch and spring for exoskeleton actuation

Most conventional robotic arms use motors to accelerate the manipulator. This leads to an unnecessary high energy consumption when performing repetitive tasks. This paper presents an approach to reduce energy consumption in robotic arms by performing its repetitive tasks with the help of a parallel spring mechanism. A special non-linear spring characteristic has been achieved by attaching a spring to two connected pulleys. This parallel spring mechanism provides for the accelerations of the manipulator without compromising its ability to vary the task parameters (the time per stroke, the displacement per stroke the grasping time and the payload). The energy consumption of the arm with the spring mechanism is compared to that of the same arm without the spring mechanism. Optimal control studies show that the robotic arm uses 22% less energy due to the spring mechanism. On the 2 DOF prototype, we achieved an energy reduction of 20%. The difference was due to model simplifications. With a spring mechanism, there is an extra energetic cost, because potential energy has to be stored into the spring during startup. This cost is equal to the total energy savings of the 2 DOF arm during 8 strokes. Next, there could have been an energetic cost to position the manipulator outside the equilibrium position. We have designed the spring mechanism in such a way that this holding cost is negligible for a range of start- and end positions. The performed experiments showed that the implementation of the proposed spring mechanism results in a reduction of the energy consumption while the arm is still able to handle varying task parameters.

A novel spring mechanism to reduce energy consumption of robotic arms

Parallel elastic actuators (PEAs) have shown the ability to reduce the energy consumption of robots. However, regular PEAs do not allow us to freely choose at which instant or configuration to store or release energy. This paper introduces the concept and design of the bidirectional clutched parallel elastic actuator (BIC-PEA), which reduces the energy consumption of robots by loading and unloading a parallel spring with controlled timing and direction. The concept of the BIC-PEA consists of a spring that is mounted between the two outgoing axes of a differential mechanism. Those axes can also be locked to the ground by two locking mechanisms. At any position, the BIC-PEA can store the kinetic energy of a joint in the spring such that the joint is decelerated to zero velocity. The spring energy can then be released, accelerating the joint in any desired direction. Such functionality is suitable for robots that perform rest-to-rest motions, such as pick-and-place robots or intermittently moving belts. The main body of our prototype weighs 202 g and fits in a cylinder with a length of 51 mm and a diameter of 45 mm. This excludes the size and weight of the nonoptimized clutches, which would approximately triple the total volume and weight. In the results, we also omit the energy consumption of the clutches. The BIC-PEA can store 0.77 J and has a peak torque of 1.5 N $\cdot$ m. Simulations show that the energy consumption of our one-degree-of-freedom setup can be reduced by 73%. In hardware experiments, we reached peak reductions of 65% and a reduction of 53% in a realistic task, which is larger than all other concepts with the same functionality.

/pdf/reducing-the-energy-consumption-of-robots-using-the-1ovifysxce.pdf

Reducing the Energy Consumption of Robots Using the Bidirectional Clutched Parallel Elastic Actuator

This paper identifies the class of actuators called clutched elastic actuators (CEAs). CEAs use clutches to control the energy flow into springs. CEAs in exoskeletons, prostheses, legged robots, and robotic arms have shown the ability to reduce the energy consumption and motor requirements, such as peak torque and peak power. Because of those abilities, they are increasingly used in robotics. In this paper, we categorize existing CEA designs, identify trends in those designs, and provide a method to analyze their functionality. Based on a literature survey, current CEA designs are placed in nine categories, depending on their morphology. The main trend is that CEA designs are becoming more complex, meaning that the number of clutches and springs increases. We show with the introduced mathematical analysis that the functionality can be analyzed with a constraint matrix, a stiffness matrix, and multiplication of a clutch-dependent diagonal matrix with an oriented incidence matrix. This method eases the analysis of the functionality of CEAs. Furthermore, it can lead to new CEA designs in which the number of resulting stiffnesses grows exponentially with the number of springs and clutches.

/pdf/clutched-elastic-actuators-10zfljht5v.pdf

Clutched Elastic Actuators

Body weight support (BWS) systems have shown promise as rehabilitation tools for neurologically impaired individuals. This paper reviews the experiment-based research on BWS systems with the aim: (1) To investigate the influence of body weight unloading (BWU) on gait characteristics; (2) To study whether the effects of BWS differ between treadmill and overground walking and (3) To investigate if modulated BWU influences gait characteristics less than unmodulated BWU. A systematic literature search was conducted in the following search engines: Pubmed, Scopus, Web of Science and Google Scholar. Statistical analysis was used to quantify the effects of BWU on gait parameters. 54 studies of experiments with healthy and neurologically impaired individuals walking in a BWS system were included and 32 of these were used for the statistical analysis. Literature was classified using three distinctions: (1) treadmill or overground walking; (2) the type of subjects and (3) the nature of unloading force. Only 27% studies were based on neurologically impaired subjects; a low number considering that they are the primary user group for BWS systems. The studies included BWU from 5% to 100% and the 30% and 50% BWU conditions were the most widely studied. The number of participants varied from 1 to 28, with an average of 12. It was seen that due to the increase in BWU level, joint moments, muscle activity, energy cost of walking and ground reaction forces (GRF) showed higher reduction compared to gait spatio-temporal and joint kinematic parameters. The influence of BWU on kinematic and spatio-temporal gait parameters appeared to be limited up to 30% unloading. 5 gait characteristics presented different behavior in response to BWU for overground and treadmill walking. Remaining 21 gait characteristics showed similar behavior but different magnitude of change for overground and treadmill walking. Modulated unloading force generally led to less difference from the 0% condition than unmodulated unloading. This review has shown that BWU influences all gait characteristics, albeit with important differences between the kinematic, spatio-temporal and kinetic characteristics. BWU showed stronger influence on the kinetic characteristics of gait than on the spatio-temporal parameters and the kinematic characteristics. It was ascertained that treadmill and overground walking can alter the effects of BWU in a different manner. Our results indicate that task-specific gait training is likely to be achievable at a BWU level of 30% and below.

/pdf/influence-of-body-weight-unloading-on-human-gait-2ctprnxr8g.pdf

Michiel Plooij

Papers

Lock Your Robot: A Review of Locking Devices in Robotics

A novel spring mechanism to reduce energy consumption of robotic arms

Reducing the Energy Consumption of Robots Using the Bidirectional Clutched Parallel Elastic Actuator

Clutched Elastic Actuators

Influence of body weight unloading on human gait characteristics : A systematic review