The introduction of microgrids in distribution networks based on power electronics facilitates the use of renewable energy resources, distributed generation (DG) and storage systems while improving the quality of electric power and reducing losses thus increasing the performance and reliability of the electrical system. The hierarchical control structure, which consists of primary, secondary, and tertiary levels for microgrids that mimic the behavior of the mains grid, is reviewed. The main objective of this article is to give a description of state of the art for distributed power generation systems (DPGS) based on renewable energy and explore the power converters connected in parallel to the grid which are distinguished by their contribution to the formation of the grid voltage and frequency and are accordingly classified in three classes. This analysis is extended focusing mainly on the three classes of configurations: grid-forming, grid-feeding, and grid-supporting. The article ends up with an overview and a discussion of the control structures and strategies to control distribution power generation system (DPGS) units connected to the network.

/pdf/a-survey-on-control-of-electric-power-distributed-generation-16eexny94f.pdf

A Survey on Control of Electric Power Distributed Generation Systems for Microgrid Applications

Recently, multilevel inverters (MLIs) have gained lots of interest in industry and academia, as they are changing into a viable technology for numerous applications, such as renewable power conversion system and drives. For these high power and high/medium voltage applications, MLIs are widely used as one of the advanced power converter topologies. To produce high-quality output without the need for a large number of switches, development of reduced switch MLI (RS MLI) topologies has been a major focus of current research. Therefore, this review paper focuses on a number of recently developed MLIs used in various applications. To assist with advanced current research in this field and in the selection of suitable inverter for various applications, significant understanding on these topologies is clearly summarized based on the three categories, i.e., symmetrical, asymmetrical, and modified topologies. This review paper also includes a comparison based on important performance parameters, detailed technical challenges, current focus, and future development trends. By a suitable combination of switches, the MLI produces a staircase output with low harmonic distortion. For a better understanding of the working principle, a single-phase RS MLI topology is experimentally illustrated for different level generation using both fundamental and high switching frequency techniques which will help the readers to gain the utmost knowledge for advance research.

/pdf/recently-developed-reduced-switch-multilevel-inverter-for-4lxrfejht6.pdf

Recently Developed Reduced Switch Multilevel Inverter for Renewable Energy Integration and Drives Application: Topologies, Comprehensive Analysis and Comparative Evaluation

Modern civilization is related to the increased use of electric energy for industry production, human mobility, and comfortable living. Highly efficient and reliable power electronic systems, which convert and process electric energy from one form to the other, are critical for smart grid and renewable energy systems. The power semiconductor device, as the cornerstone technology in a power electronics system, plays a pivotal role in determining the system efficiency, size, and cost. Starting from the invention and commercialization of silicon bipolar junction transistor 60 years ago, a whole array of silicon power semiconductor devices have been developed and commercialized. These devices enable power electronics systems to reach ultrahigh efficiency and high-power capacity needed for various smart grid and renewable energy system applications such as photovoltaic (PV), wind, energy storage, electric vehicle (EV), flexible ac transmission system (FACTS), and high voltage dc (HVDC) transmission. In the last two decades, newer generations of power semiconductor devices based on wide bandgap (WBG) materials, such as SiC and GaN, were developed and commercialized further pushing the boundary of power semiconductor devices to higher voltages, higher frequencies, and higher temperatures. This paper reviews some of the major power semiconductor devices technologies and their potential impacts and roadmaps.

Power Semiconductor Devices for Smart Grid and Renewable Energy Systems

Although conventional electromechanical circuit breakers have a proven record as effective and reliable devices for circuit protection, emerging power distribution technologies and architectures, such as dc microgrids, require improved interruption performance characteristics (eg, faster switching speed) The need for faster switching operation, in combination with the latest developments of advanced power semiconductor technologies, has spurred an increase in the research and development in the area of solid-state circuit breakers This article provides a comprehensive review of various solid-state circuit breaker technologies that have been reported in the literature during recent years First, we categorize solid-state circuit breakers based on key features and subsystems, including power semiconductor devices, main circuit topologies, voltage clamping methods, gate drivers, fault detection methods, and commutation methods for power semiconductor devices Second, we discuss the various challenges associated with the design of solid-state circuit breakers from the perspective of generic applications and provide a comparison of several solid-state breaker technologies based on key metrics Finally, we provide a useful framework and point of reference for future development of solid-state circuit breakers for many emerging power distribution applications

A Review of Solid-State Circuit Breakers

Large-scale grid-connected photovoltaic (PV) systems significantly contribute to worldwide renewable energy growth and penetration, which has inspired the application of cascaded modular multilevel converters due to their unique features such as modular structures, enhanced energy harvesting capability, scalability and so on However, power distribution and control in the cascaded PV system faces tough challenge on output voltage overmodulation when considering the varied and nonuniform solar energy on segmented PV arrays This paper addresses this issue and proposes a decoupled active and reactive power control strategy to enhance system operation performance The relationship between output voltage components of each module and power generation is analyzed with the help of a newly derived vector diagram which illustrates the proposed power distribution principle On top of this, an effective control system including active and reactive components extraction, voltage distribution and synthesization, is developed to achieve independent active and reactive power distribution and mitigate the aforementioned issue Finally, a 3-MW, 12-kV PV system with the proposed control strategy is modeled and simulated in MATLAB and PSIM cosimulation platform A downscaled PV system including two cascaded 5-kW converters with proposed control strategy is also implemented in the laboratory Simulation and experimental results are provided to demonstrate the effectiveness of the proposed control strategy for large-scale grid-connected cascaded PV systems

Decoupled Active and Reactive Power Control for Large-Scale Grid-Connected Photovoltaic Systems Using Cascaded Modular Multilevel Converters

Based on the hybrid operation of interleaved flyback micro-inverter in discontinuous and boundary conduction modes (DCM and BCM), a novel adaptive snubber is proposed in this paper. The proposed snubber limits the drain-to-source voltage overshoot of the flyback's main switch during the turn-off process, enabling the use of lower voltage MOSFETs. It also recovers the stored energy in the leakage inductance of the flyback transformer and provides soft switching for the main flyback switch by limiting the rising slope of the MOSFET voltage during the turn-off process resulting in higher efficiency. Exploiting the natural resonant of the flyback converter in BCM, the adopted controller provides ZVS and ZCS for the main switch during the BCM operation. The operation of the flyback micro-inverter with associated controllers is analytically studied, and considerations for an optimum design aiming to higher efficiency are presented. Performance of the flyback micro-inverter with the proposed adaptive snubber and the corresponding controllers is experimentally verified based on a 250W interleaved flyback micro-inverter hardware setup.

A High-Efficiency Flyback Micro-inverter With a New Adaptive Snubber for Photovoltaic Applications

Based on the hybrid operation of interleaved flyback micro-inverter in Discontinuous and Boundary Conduction Modes (DCM and BCM), a novel adaptive snubber is proposed in this paper. The proposed snubber limits the drain-to-source voltage overshoot of the flyback's main switch during the turn-off process, enabling the use of lower voltage MOSFETs. It also recovers the stored energy in the leakage inductance of the flyback transformer and provides soft switching for the main flyback switch by limiting the rising slope of the MOSFET voltage during the turn off process resulting in higher efficiency. Exploiting the natural resonant of the flyback converter in BCM the adopted controller provides ZVS and ZCS for the main switch during the BCM operation. The operation of the flyback micro-inverter with associated controllers is analytically studied, and considerations for an optimum design aiming to higher efficiency are presented. Performance of the flyback micro-inverter with the proposed adaptive snubber and the corresponding controllers are experimentally verified based on a 250W interleaved flyback micro-inverter hardware setup.

A high efficiency flyback micro-inverter with a new adaptive snubber for photovoltaic applications

Three generations of medium voltage fault isolation devices (FID) for a power electronics based distribution system, the FREEDM System, are reported in this paper. In the Gen-I FID, three 6.5 kV silicon IGBTs are series connected to achieve 15 kV class distribution voltage blocking capability. Whereas in the Gen-II and the Gen-III FIDs, 15 kV Silicon Carbide (SiC) ETO devices are used. Since one single such device can meet the voltage withstand requirement, the operation losses as well as dimensions are significantly reduced. Future improvements in the Gen-III FID include the use of hybrid schemes and the development of symmetrical blocking high voltage SiC devices to further minimize the operation losses.

Development of medium voltage solid-state fault isolation devices for ultra-fast protection of distribution systems

In this paper a single-phase Cascaded H-Bridge (CHB) inverter for photovoltaic (PV) applications is presented. Based on the presented mathematical analysis, a novel controller is introduced which adjusts the inverter power factor (PF) and manipulates the distribution of the reactive power between the cells to enhance the operating range of the CHB inverter. The adopted control strategy enables tracking of the maximum power point (MPP) of distinct PV strings and allows independent control of the dc-link voltages. The proposed controller also enables the inverter to operate under heavily unbalanced PV conditions. The performance of the CHB inverter and the proposed controllers are evaluated in the PSCAD/EMTDC environment. A seven-level CHB-based grid connected laboratory prototype is also utilized to verify the system performance.

/pdf/grid-connected-photovoltaic-system-based-on-a-cascaded-h-1g1ynt25hi.pdf

Grid-Connected Photovoltaic System Based on a Cascaded H-Bridge Inverter

This paper presents a single-phase Cascaded H-Bridge (CHB) inverter for photovoltaic (PV) applications. The adopted control strategy allows the independent control of each dc-link voltage, enabling the tracking of the maximum power point (MPP) of each solar panel. Based on the presented mathematical analysis, the stable operation boundaries of the inverter under unbalanced operation conditions, without any additional controller is explored. A novel reactive power controller is also proposed that enhances the operating range of the CHB inverter. The proposed reactive power controller enables the inverter to operate under unbalanced solar panel conditions, i.e. the worst case, when one panel becomes completely shaded. Performance of the CHB inverter and the corresponding controllers are evaluated based on the digital time domain simulation studies in the PSCAD/EMTDC environment.

Mohammad Ali Rezaei

Papers

A High-Efficiency Flyback Micro-inverter With a New Adaptive Snubber for Photovoltaic Applications

A high efficiency flyback micro-inverter with a new adaptive snubber for photovoltaic applications

Development of medium voltage solid-state fault isolation devices for ultra-fast protection of distribution systems

Grid-Connected Photovoltaic System Based on a Cascaded H-Bridge Inverter

Enhancing the reliability of single-phase CHB-based grid-connected photovoltaic energy systems