The increasing use of wireless networks and the constant miniaturization of electrical devices has empowered the development of Wireless Body Area Networks (WBANs). In these networks various sensors are attached on clothing or on the body or even implanted under the skin. The wireless nature of the network and the wide variety of sensors offer numerous new, practical and innovative applications to improve health care and the Quality of Life. The sensors of a WBAN measure for example the heartbeat, the body temperature or record a prolonged electrocardiogram. Using a WBAN, the patient experiences a greater physical mobility and is no longer compelled to stay in the hospital. This paper offers a survey of the concept of Wireless Body Area Networks. First, we focus on some applications with special interest in patient monitoring. Then the communication in a WBAN and its positioning between the different technologies is discussed. An overview of the current research on the physical layer, existing MAC and network protocols is given. Further, cross layer and quality of service is discussed. As WBANs are placed on the human body and often transport private data, security is also considered. An overview of current and past projects is given. Finally, the open research issues and challenges are pointed out.

/pdf/a-survey-on-wireless-body-area-networks-f3nx5ii4yv.pdf

A survey on wireless body area networks

The Internet of Things (IoT) is defined as a paradigm in which objects equipped with sensors, actuators, and processors communicate with each other to serve a meaningful purpose. In this paper, we survey state-of-the-art methods, protocols, and applications in this new emerging area. This survey paper proposes a novel taxonomy for IoT technologies, highlights some of the most important technologies, and profiles some applications that have the potential to make a striking difference in human life, especially for the differently abled and the elderly. As compared to similar survey papers in the area, this paper is far more comprehensive in its coverage and exhaustively covers most major technologies spanning from sensors to applications.

/pdf/internet-of-things-architectures-protocols-and-applications-46rpfbd58i.pdf

Internet of Things: Architectures, Protocols, and Applications

Appearing in 1st IEEE International Workshop on Sensor Net Protocols and Applications (SNPA). Anchorage, Alaska, USA. May 11, 2003. RMST: Reliable Data Transport in Sensor Networks Fred Stann, John Heidemann Abstract – Reliable data transport in wireless sensor networks is a multifaceted problem influenced by the physical, MAC, network, and transport layers. Because sensor networks are subject to strict resource constraints and are deployed by single organizations, they encourage revisiting traditional layering and are less bound by standardized placement of services such as reliability. This paper presents analysis and experiments resulting in specific recommendations for implementing reliable data transport in sensor nets. To explore reliability at the transport layer, we present RMST (Reliable Multi- Segment Transport), a new transport layer for Directed Diffusion. RMST provides guaranteed delivery and fragmentation/reassembly for applications that require them. RMST is a selective NACK-based protocol that can be configured for in-network caching and repair. Second, these energy constraints, plus relatively low wireless bandwidths, make in-network processing both feasible and desirable [3]. Third, because nodes in sensor networks are usually collaborating towards a common task, rather than representing independent users, optimization of the shared network focuses on throughput rather than fairness. Finally, because sensor networks are often deployed by a single organization with inexpensive hardware, there is less need for interoperability with existing standards. For all of these reasons, sensor networks provide an environment that encourages rethinking the structure of traditional communications protocols. The main contribution is an evaluation of the placement of reliability for data transport at different levels of the protocol stack. We consider implementing reliability in the MAC, transport layer, application, and combinations of these. We conclude that reliability is important at the MAC layer and the transport layer. MAC-level reliability is important not just to provide hop-by-hop error recovery for the transport layer, but also because it is needed for route discovery and maintenance. (This conclusion differs from previous studies in reliability for sensor nets that did not simulate routing. [4]) Second, we have developed RMST (Reliable Multi-Segment Transport), a new transport layer, in order to understand the role of in- network processing for reliable data transfer. RMST benefits from diffusion routing, adding minimal additional control traffic. RMST guarantees delivery, even when multiple hops exhibit very high error rates. 1 Introduction Wireless sensor networks provide an economical, fully distributed, sensing and computing solution for environments where conventional networks are impractical. This paper explores the design decisions related to providing reliable data transport in sensor nets. The reliable data transport problem in sensor nets is multi-faceted. The emphasis on energy conservation in sensor nets implies that poor paths should not be artificially bolstered via mechanisms such as MAC layer ARQ during route discovery and path selection [1]. Path maintenance, on the other hand, benefits from well- engineered recovery either at the MAC layer or the transport layer, or both. Recovery should not be costly however, since many applications in sensor nets are impervious to occasional packet loss, relying on the regular delivery of coarse-grained event descriptions. Other applications require loss detection and repair. These aspects of reliable data transport include the provision of guaranteed delivery and fragmentation/ reassembly of data entities larger than the network MTU. Sensor networks have different constraints than traditional wired nets. First, energy constraints are paramount in sensor networks since nodes can often not be recharged, so any wasted energy shortens their useful lifetime [2]. This work was supported by DARPA under grant DABT63-99-1-0011 as part of the SCAADS project, and was also made possible in part due to support from Intel Corporation and Xerox Corporation. Fred Stann and John Heidemann are with USC/Information Sciences Institute, 4676 Admiralty Way, Marina Del Rey, CA, USA E-mail: fstann@usc.edu, johnh@isi.edu. 2 Architectural Choices There are a number of key areas to consider when engineering reliability for sensor nets. Many current sensor networks exhibit high loss rates compared to wired networks (2% to 30% to immediate neighbors)[1,5,6]. While error detection and correction at the physical layer are important, approaches at the MAC layer and higher adapt well to the very wide range of loss rates seen in sensor networks and are the focus of this paper. MAC layer protocols can ameliorate PHY layer unreliability, and transport layers can guarantee delivery. An important question for this paper is the trade off between implementation of reliability at the MAC layer (i.e. hop to hop) vs. the Transport layer, which has traditionally been concerned with end-to-end reliability. Because sensor net applications are distributed, we also considered implementing reliability at the application layer. Our goal is to minimize the cost of repair in terms of transmission.

RMST: Reliable Data Transport in Sensor Networks

Interest in Wireless Body Area Networks (WBANs) has increased significantly in recent years thanks to the advances in microelectronics and wireless communications. Owing to the very stringent application requirements in terms of reliability, energy efficiency, and low device complexity, the design of these networks requires the definition of new protocols with respect to those used in general purpose wireless sensor networks. This motivates the effort in research activities and in standardisation process of the last years. This survey paper aims at reporting an overview of WBAN main applications, technologies and standards, issues in WBANs design, and evolutions. Some case studies are reported, based on both real implementation and experimentation on the field, and on simulations. These results have the aim of providing useful insights for WBAN designers and of highlighting the main issues affecting the performance of these kind of networks.

A Survey on Wireless Body Area Networks: Technologies and Design Challenges

Edge computing: A survey

Mobile phone sensing is an emerging area of interest for researchers as smart phones are becoming the core communication device in people's everyday lives. Sensor enabled mobile phones or smart phones are hovering to be at the center of a next revolution in social networks, green applications, global environmental monitoring, personal and community healthcare, sensor augmented gaming, virtual reality and smart transportation systems. More and more organizations and people are discovering how mobile phones can be used for social impact, including how to use mobile technology for environmental protection, sensing, and to leverage just-in-time information to make our movements and actions more environmentally friendly. In this paper we have described comprehensively all those systems which are using smart phones and mobile phone sensors for humans good will and better human phone interaction.

Mobile Phone Sensing Systems: A Survey

Wireless Sensor Networks in oil and gas industry: Recent advances, taxonomy, requirements, and open challenges

Internet of Things (IoT) is rapidly growing and contributing drastically to improve the quality of life. Immense technological innovations and growth is a key factor in IoT advancements. Readily available low cost IoT hardware is essential for continuous adaptation of IoT. Advancements in IoT Operating System (OS) to support these newly developed IoT hardware along with the recent standards and techniques for all the communication layers are the way forward. The variety of IoT OS availability demands to support interoperability that requires to follow standard set of rules for development and protocol functionalities to support heterogeneous deployment scenarios. IoT requires to be intelligent to self-adapt according to the network conditions. In this paper, we present brief overview of different IoT OSs, supported hardware, and future research directions. Therein, we provide overview of the accepted papers in our Special Issue on IoT OS management: opportunities, challenges, and solution. Finally, we conclude the manuscript.

https://www.mdpi.com/1424-8220/19/8/1793/pdf

Internet of Things (IoT) Operating Systems Management: Opportunities, Challenges, and Solution.

Anomaly detection systems deployed for monitoring in oil and gas industries are mostly WSN based systems or SCADA systems which all suffer from noteworthy limitations. WSN based systems are not homogenous or incompatible systems. They lack coordinated communication and transparency among regions and processes. On the other hand, SCADA systems are expensive, inflexible, not scalable, and provide data with long delay. In this paper, a novel IoT based architecture is proposed for Oil and gas industries to make data collection from connected objects as simple, secure, robust, reliable and quick. Moreover, it is suggested that how this architecture can be applied to any of the three categories of operations, upstream, midstream and downstream. This can be achieved by deploying a set of IoT based smart objects (devices) and cloud based technologies in order to reduce complex configurations and device programming. Our proposed IoT architecture supports the functional and business requirements of upstream, midstream and downstream oil and gas value chain of geologists, drilling contractors, operators, and other oil field services. Using our proposed IoT architecture, inefficiencies and problems can be picked and sorted out sooner ultimately saving time and money and increasing business productivity.

A reliable Internet of Things based architecture for oil and gas industry

Wireless sensor networks are a collection of a number of tiny, low-cost, and resource-constrained sensor nodes which are commonly not tamper proof. As a result, wireless sensor networks (WSNs) are prone to a wide variety of physical attacks. In this paper, we deem a typical threat known as node replication attack or clone node attack, where an adversary creates its own low-cost sensor nodes called clone nodes and misinforms the network to acknowledge them as legitimate nodes. To instigate this attack, an adversary only needs to physically capture one node, and after collecting all secret credentials (ID, cryptographic keys, etc.), an adversary replicates the sensor node and deploys one or more clones of the compromised node into the network at strategic positions, damaging the whole network by carrying out many internal attacks. Detecting the node replication attack has become an imperative research topic in sensor network security, and designing detection schemes against node replication attack involves ...

/pdf/detection-and-mitigation-of-node-replication-attacks-in-45t3kxmu6q.pdf

Mohammed Y. Aalsalem

Papers

Mobile Phone Sensing Systems: A Survey

Wireless Sensor Networks in oil and gas industry: Recent advances, taxonomy, requirements, and open challenges

Internet of Things (IoT) Operating Systems Management: Opportunities, Challenges, and Solution.

A reliable Internet of Things based architecture for oil and gas industry

Detection and Mitigation of Node Replication Attacks in Wireless Sensor Networks: A Survey