There is, I think, something ethereal about i —the square root of minus one. I remember first hearing about it at school. It seemed an odd beast at that time—an intruder hovering on the edge of reality.

Usually familiarity dulls this sense of the bizarre, but in the case of i it was the reverse: over the years the sense of its surreal nature intensified. It seemed that it was impossible to write mathematics that described the real world in …

I and i

Biomass is an important feedstock for the renewable production of fuels, chemicals, and energy. As of 2005, over 3% of the total energy consumption in the United States was supplied by biomass, and it recently surpassed hydroelectric energy as the largest domestic source of renewable energy. Similarly, the European Union received 66.1% of its renewable energy from biomass, which thus surpassed the total combined contribution from hydropower, wind power, geothermal energy, and solar power. In addition to energy, the production of chemicals from biomass is also essential; indeed, the only renewable source of liquid transportation fuels is currently obtained from biomass.

The Catalytic Valorization of Lignin for the Production of Renewable Chemicals

Renewable Resources Robert-Jan van Putten,†,‡ Jan C. van der Waal,† Ed de Jong,*,† Carolus B. Rasrendra,‡,⊥ Hero J. Heeres,*,‡ and Johannes G. de Vries* †Avantium Chemicals, Zekeringstraat 29, 1014 BV Amsterdam, the Netherlands ‡Department of Chemical Engineering, University of Groningen, Nijenborgh 4, 9747 AG Groningen, the Netherlands Stratingh Institute for Chemistry, University of Groningen, Nijenborgh 4, 9747 AG Groningen, the Netherlands DSM Innovative Synthesis BV, P.O. Box 18, 6160 MD Geleen, the Netherlands Department of Chemical Engineering, Institut Teknologi Bandung, Ganesha 10, Bandung 40132, Indonesia

Hydroxymethylfurfural, A Versatile Platform Chemical Made from Renewable Resources

This critical review provides a survey illustrated by recent references of different strategies to achieve a sustainable conversion of biomass to bioproducts. Because of the huge number of chemical products that can be potentially manufactured, a selection of starting materials and targeted chemicals has been done. Also, thermochemical conversion processes such as biomass pyrolysis or gasification as well as the synthesis of biofuels were not considered. The synthesis of chemicals by conversion of platform molecules obtained by depolymerisation and fermentation of biopolymers is presently the most widely envisioned approach. Successful catalytic conversion of these building blocks into intermediates, specialties and fine chemicals will be examined. However, the platform molecule value chain is in competition with well-optimised, cost-effective synthesis routes from fossil resources to produce chemicals that have already a market. The literature covering alternative value chains whereby biopolymers are converted in one or few steps to functional materials will be analysed. This approach which does not require the use of isolated, pure chemicals is well adapted to produce high tonnage products, such as paper additives, paints, resins, foams, surfactants, lubricants, and plasticisers. Another objective of the review was to examine critically the green character of conversion processes because using renewables as raw materials does not exempt from abiding by green chemistry principles (368 references).

Conversion of biomass to selected chemical products

Various novel techniques including ultrasound-assisted extraction, microwave-assisted extraction, supercritical fluid extraction, and accelerated solvent extraction have been developed for the extraction of nutraceuticals from plants in order to shorten the extraction time, decrease the solvent consumption, increase the extraction yield, and enhance the quality of extracts. A critical review was conducted to introduce and compare the conventional Soxhlet extraction and the new alternative methods used for the extraction of nutraceuticals from plants. The practical issues of each extraction method were discussed. Potential uses of those methods for the extraction of nutraceuticals from plant materials was finally summarized.

Recent advances in extraction of nutraceuticals from plants

Continuous-mixture theory is based on the assumption that when a large number of components make up a mixture, the frequency distribution can be approximated by a.continuous function. Here we apply this concept to multicomponent leaching or extraction from porous particles in a continuous-flow system. Desorption from the solid matrix and partitioning between the extraction fluid and an immiscible fluid in the pores of the matrix are included in the mathematical model. Intraparticle diffusion and external mass transfer are combined in a linear driving-force approximation. The mass balance equations for intra-particle and external fluid processes govern the time evolution of frequency distribution functions for different mixtures. The approach satisfactorily describes experimental data for supercritical extraction of triglycerides.

Continuous-mixture model of extraction processes

Molecular dynamics simulation and thermodynamic model of triple point of Lennard-Jones fluid in cylindrical nanopores

Degradation of aniline by pulsed discharge plasma in hydrothermal conditions

Nickel nanoparticles with various structures were synthesized by a pulsed laser ablation process in liquid CO2 at 17 °C and 5.2 MPa. A nickel plate immersed in liquid CO2 was used as a target. This was irradiated by a laser beam with a fundamental wavelength of 1064 nm at 2.46 mJ for 15 min. The generated particles were deposited on a silicon wafer after natural evaporation of the liquid CO2, and analyzed by field emission scanning electron microscopy, scanning electron microscopy with energy-dispersive X-ray spectroscopy, and transmission electron microscopy. Nickel and carbon particles with sphere-like structures or apple-shaped structures were observed. Furthermore, characteristic nickel/carbon particles with core/shell structures were also produced. The generated particles ranged in size between 5 and 350 nm in diameter, with dominant sizes under 50 nm.

Nickel nanoparticles generated by pulsed laser ablation in liquid CO2

The aim of this study was to promote the Z-isomerization of lycopene in its extraction process from tomato pulp by adding foodstuffs containing Z-isomerization-accelerating compounds. The addition of onion, broccoli, mustard, makonbu (Saccharina japonica), or shiitake mushroom (Lentinus edodes) to the ethyl acetate extraction process significantly accelerated the Z-isomerization of lycopene. For example, when lycopene was extracted from tomato pulp at 70 °C without foodstuffs, the total Z-isomer ratio of lycopene in the extract was 38.4 ± 0.5%, whereas when onion, broccoli, mustard, makonbu, and shiitake mushroom were added to the process and the extraction was performed using the same procedure, the total Z-isomer ratios significantly increased to 53.6 ± 0.4, 47.9 ± 0.3, 48.2 ± 0.1, 41.5 ± 0.9, and 42.0 ± 1.2%, respectively. Since the above foodstuffs contain large amounts of carotenoid Z-isomerization-accelerating catalysts, i.e., polysulfides, isothiocyanates, or iodine, those components would promote Z-isomerization of lycopene in the extraction process. Since lycopene Z-isomers potentially have higher bioavailability and biological effects than the all-E-isomer, lycopene extraction with foodstuffs having a Z-isomerization-promoting effect in ethyl acetate should enhance the health benefits of tomato extracts.

Motonobu Goto

Papers

Continuous-mixture model of extraction processes

Molecular dynamics simulation and thermodynamic model of triple point of Lennard-Jones fluid in cylindrical nanopores

Degradation of aniline by pulsed discharge plasma in hydrothermal conditions

Nickel nanoparticles generated by pulsed laser ablation in liquid CO2

Enriched (Z)-lycopene in Tomato Extract via Co-Extraction of Tomatoes and Foodstuffs Containing Z-isomerization-accelerating Compounds