Seawater desalination using renewable energy sources

Several simplified design procedures for solar energy systems require monthly average meteorological data. Monthly average daily totals of the solar radiation incident on a horizontal surface are available. However, radiation data on tilted surfaces, required by the design procedures, are generally not available. A simple method of estimating the average daily radiation for each calendar month on surfaces facing directly towards the equator has been presented by Liu and Jordan [1]. This method is verified with experimental measurements and extended to allow calculation of monthly average radiation on surfaces of a wide range of orientations.

Calculation of monthly average insolation on tilted surfaces

Developments in organic solid–liquid phase change materials and their applications in thermal energy storage

The use of central receiver system (CRS) for electricity production promises to be one of the most viable options to replace fossil fuel power plants. Indeed, research and development activities on its basic subsystems have been booming rapidly since 1980s. This paper reviews the most important studies on the major components of central receiver solar thermal power plants including the heliostat field, the solar receiver and the power conversion system. After an overview of Concentrating Solar Power (CSP) technology, current status and applications of the CRSs are highlighted. Next, a detailed literature survey of existing design comprising optical, thermal and thermodynamic analysis, and techniques used to assess components have been arranged. This is followed by experimental investigations in which design concepts are established. The last section contains recent subsequent improvement of such key components as heliostat, receiver and hybrid solar gas turbine that are boosting in many R&D activities merging international collaboration during the past 30 years.

A review of studies on central receiver solar thermal power plants

In this paper, the principles underlying the operation of desiccant cooling systems are recalled and their actual technological applications are discussed. Through a literature review, the feasibility of the desiccant cooling in different climates is proven and the advantages it can offer in terms energy and cost savings are underscored. Some commented examples are presented to illustrate how the desiccant cooling can be a perfective supplement to other cooling systems such as traditional vapour compression air conditioning system, the evaporative cooling, and the chilled-ceiling radiant cooling. It is notably shown that the desiccant materials, when associated with evaporative cooling or chilled-ceiling radiant cooling, can render them applicable under a diversity of climatic conditions.

Desiccant cooling air conditioning : a review

Performance enhancement of the photovoltaic cells using Al2O3/PCM mixture and/or water cooling-techniques

Proposed energy-efficient air-conditioning system using liquid desiccant

Optimum orientation of absorber plates

An experimental investigation was carried out to determine the heat transfer coefficient from a rectangular tilted cavity to the ambient due to the buoyancy driven flow in the cavity. The cavity is partially or fully open from one side. All the walls of the cavity are adiabatic except the wall facing the cavity opening which is heated at a constant heat flux. Air was used as the cavity fluid and the experiments were carried out at a flux Grashof number of 5.5 x 10 8 . The tilt angle of the cavity, measured from the vertical direction, was changed between -90 deg to +90 deg in 15 deg increments. Also, geometries of aspect ratio (height-to-width of cavity) of 1.0, 0.5, and 0.25 and of opening ratio (opening height to cavity height) of 1.0, 0.5, and 0.25 were considered in the study. The results are presented in terms of the average Nusselt number for different values of the above experimental parameters. Conclusions are derived for the effect of changing the tilt angle, the aspect ratio, or the opening ratio of the cavity on the average heat transfer coefficient between the cavity and the ambient air.

Experimental Measurements of Heat Transfer Coefficient in a Partially/Fully Opened Tilted Cavity

/pdf/design-of-solar-thermal-systems-3gmeccg6ny.pdf

Moustafa M. Elsayed

Papers

Performance enhancement of the photovoltaic cells using Al2O3/PCM mixture and/or water cooling-techniques

Proposed energy-efficient air-conditioning system using liquid desiccant

Optimum orientation of absorber plates

Experimental Measurements of Heat Transfer Coefficient in a Partially/Fully Opened Tilted Cavity

Design of Solar Thermal Systems