Thank you very much for downloading design of analog cmos integrated circuits. Maybe you have knowledge that, people have look hundreds times for their favorite novels like this design of analog cmos integrated circuits, but end up in malicious downloads. Rather than reading a good book with a cup of coffee in the afternoon, instead they cope with some malicious virus inside their laptop. design of analog cmos integrated circuits is available in our book collection an online access to it is set as public so you can download it instantly. Our digital library saves in multiple countries, allowing you to get the most less latency time to download any of our books like this one. Merely said, the design of analog cmos integrated circuits is universally compatible with any devices to read.

Design Of Analog Cmos Integrated Circuits

Massive multiuser (MU) multiple-input multiple-output (MIMO) is foreseen to be one of the key technologies in fifth-generation wireless communication systems. In this paper, we investigate the problem of downlink precoding for a narrowband massive MU-MIMO system with low-resolution digital-to-analog converters (DACs) at the base station (BS). We analyze the performance of linear precoders, such as maximal-ratio transmission and zero-forcing, subject to coarse quantization. Using Bussgang’s theorem, we derive a closed-form approximation on the rate achievable under such coarse quantization. Our results reveal that the performance attainable with infinite-resolution DACs can be approached using DACs having only 3–4 bits of resolution, depending on the number of BS antennas and the number of user equipments (UEs). For the case of 1-bit DACs, we also propose novel nonlinear precoding algorithms that significantly outperform linear precoders at the cost of an increased computational complexity. Specifically, we show that nonlinear precoding incurs only a 3 dB penalty compared with the infinite-resolution case for an uncoded bit-error rate of 10−3, in a system with 128 BS antennas that uses 1-bit DACs and serves 16 single-antenna UEs. In contrast, the penalty for linear precoders is about 8 dB.

Quantized Precoding for Massive MU-MIMO

Beamforming is considered as one of the most important techniques for designing advanced multiple-input and multiple-output (MIMO) systems. Among existing design criterions, sum rate maximization (SRM) under a total power constraint is a challenge due to its nonconvexity. Existing techniques for the SRM problem only obtain local optimal solutions but require huge amount of computation due to their complex matrix operations and iterations. Unlike these conventional methods, we propose a deep learning based fast beamforming design method without complex operations and iterations. Specifically, we first derive a heuristic solution structure of the downlink beamforming through the virtual equivalent uplink channel based on optimum MMSE receiver which separates the problem into power allocation and virtual uplink beamforming (VUB) design. Next, beamforming prediction network (BPNet) is designed to perform the joint optimization of power allocation and VUB design. Moreover, the BPNet is trained offline using two-step training strategy. Simulation results demonstrate that our proposed method is fast while obtains the comparable performance to the state-of-the-art method.

Fast Beamforming Design via Deep Learning

Interference is traditionally viewed as a performance limiting factor in wireless communication systems, which is to be minimized or mitigated. Nevertheless, a recent line of work has shown that by manipulating the interfering signals such that they add up constructively at the receiver side, known interference can be made beneficial and further improve the system performance in a variety of wireless scenarios, achieved by symbol-level precoding (SLP). This paper aims to provide a tutorial on interference exploitation techniques from the perspective of precoding design in a multi-antenna wireless communication system, by beginning with the classification of constructive interference (CI) and destructive interference (DI). The definition for CI is presented and the corresponding mathematical characterization is formulated for popular modulation types, based on which optimization-based precoding techniques are discussed. In addition, the extension of CI precoding to other application scenarios as well as for hardware efficiency is also described. Proof-of-concept testbeds are demonstrated for the potential practical implementation of CI precoding, and finally a list of open problems and practical challenges are presented to inspire and motivate further research directions in this area.

/pdf/a-tutorial-on-interference-exploitation-via-symbol-level-3h4ot5avtv.pdf

A Tutorial on Interference Exploitation via Symbol-Level Precoding: Overview, State-of-the-Art and Future Directions

Terahertz (THz)-band communications are a key enabler for future-generation wireless communication systems that promise to integrate a wide range of data-demanding applications. Recent advancements in photonic, electronic, and plasmonic technologies are closing the gap in THz transceiver design. Consequently, prospect THz signal generation, modulation, and radiation methods are converging, and the corresponding channel model, noise, and hardware-impairment notions are emerging. Such progress paves the way for well-grounded research into THz-specific signal processing techniques for wireless communications. This tutorial overviews these techniques with an emphasis on ultra-massive multiple-input multiple-output (UM-MIMO) systems and reconfigurable intelligent surfaces, which are vital to overcoming the distance problem at very high frequencies. We focus on the classical problems of waveform design and modulation, beamforming and precoding, index modulation, channel estimation, channel coding, and data detection. We also motivate signal processing techniques for THz sensing and localization.

An Overview of Signal Processing Techniques for Terahertz Communications

Massive multi-user (MU) multiple-input multiple-output (MIMO) will be a core technology in fifth-generation (5G) wireless systems as it offers significant improvements in spectral efficiency compared to existing multi-antenna technologies. The presence of hundreds of antenna elements at the base station (BS), however, results in excessively high hardware costs and power consumption, and requires high interconnect throughput between the baseband-processing unit and the radio unit. Massive MU-MIMO that uses low-resolution analog-to-digital and digital-to-analog converters (DACs) has the potential to address all these issues. In this paper, we focus on downlink precoding for massive MU-MIMO systems with 1-bit DACs at the BS. The objective is to design precoders that simultaneously mitigate MU interference and quantization artifacts. We propose two nonlinear 1-bit precoding algorithms and corresponding very large-scale integration (VLSI) designs. Our algorithms rely on biconvex relaxation, which enables the design of efficient 1-bit precoding algorithms that achieve superior error-rate performance compared with that of linear precoding algorithms followed by quantization. To showcase the efficacy of our algorithms, we design VLSI architectures that enable efficient 1-bit precoding for massive MU-MIMO systems, in which hundreds of antennas serve tens of user equipments. We present corresponding field-programmable gate array (FPGA) reference implementations to demonstrate that 1-bit precoding enables reliable and high-rate downlink data transmission in practical systems.

https://publications.lib.chalmers.se/records/fulltext/254483/local_254483.pdf

1-bit Massive MU-MIMO Precoding in VLSI

Massive multiuser (MU) multiple-input multiple-output (MIMO) will be a core technology in fifth-generation (5G) wireless systems as it offers significant improvements in spectral efficiency compared to existing multi-antenna technologies. The presence of hundreds of antenna elements at the base station (BS), however, results in excessively high hardware costs and power consumption, and requires high interconnect throughput between the baseband-processing unit and the radio unit. Massive MU-MIMO that uses low-resolution analog-to-digital and digital-to-analog converters (DACs) has the potential to address all these issues. In this paper, we focus on downlink precoding for massive MU-MIMO systems with 1-bit DACs at the BS. The objective is to design precoders that simultaneously mitigate multi-user interference (MUI) and quantization artifacts. We propose two nonlinear 1-bit precoding algorithms and corresponding very-large scale integration (VLSI) designs. Our algorithms rely on biconvex relaxation, which enables the design of efficient 1-bit precoding algorithms that achieve superior error-rate performance compared to that of linear precoding algorithms followed by quantization. To showcase the efficacy of our algorithms, we design VLSI architectures that enable efficient 1-bit precoding for massive MU-MIMO systems in which hundreds of antennas serve tens of user equipments. We present corresponding field-programmable gate array (FPGA) implementations to demonstrate that 1-bit precoding enables reliable and high-rate downlink data transmission in practical systems.

Practical data detectors for future wireless systems with hundreds of antennas at the base station must achieve high throughput and low error rate at low complexity. Since the complexity of maximum-likelihood (ML) data detection is prohibitive for such large wireless systems, approximate methods are necessary. In this paper, we propose a novel data detection algorithm referred to as Triangular Approximate SEmidefinite Relaxation (TASER), which is suitable for two application scenarios: i) coherent data detection in large multi-user multiple-input multiple-output (MU-MIMO) wireless systems and ii) joint channel estimation and data detection in large single-input multiple-output (SIMO) wireless systems. For both scenarios, we show that TASER achieves near-ML error-rate performance at low complexity by relaxing the associated ML-detection problems into a semidefinite program, which we solve approximately using a preconditioned forward-backward splitting procedure. Since the resulting problem is non-convex, we provide convergence guarantees for our algorithm. To demonstrate the efficacy of TASER in practice, we design a systolic architecture that enables our algorithm to achieve high throughput at low hardware complexity, and we develop reference field-programmable gate array (FPGA) and application-specific integrated circuit (ASIC) designs for various antenna configurations.

Data Detection in Large Multi-Antenna Wireless Systems via Approximate Semidefinite Relaxation

One-bit quantization at the base-station (BS) of a massive multiple-input multiple-output (MIMO) wireless system enables significant power and cost savings. While the 1-bit uplink (users communicate to BS) has gained significant attention, the downlink (BS transmits to users) is far less studied. In this paper, we propose a novel, computationally-efficient 1-bit beamforming algorithm referred to as POKEMON (short for PrOjected downlinK bEaMfOrmiNg), which—after its convolution with the MIMO channel matrix—minimizes multi-user interference (a.k.a. spatial leakage). Our algorithm builds upon the biconvex relaxation (BCR) framework, which efficiently approximates the optimal 1-bit beamforming problem that is of combinatorial nature. Our simulation results show that POKEMON significantly outperforms linear beamformers followed by 1-bit quantization in terms of error-rate performance and recent non-linear beamformers in terms of complexity.

/pdf/pokemon-a-non-linear-beamforming-algorithm-for-1-bit-massive-4qsccnff9l.pdf

POKEMON: A non-linear beamforming algorithm for 1-bit massive MIMO

Neural networks have been proposed recently for positioning and channel charting of user equipments (UEs) in wireless systems. Both of these approaches process channel state information (CSI) that is acquired at a multi-antenna basestation in order to learn a function that maps CSI to location information. CSI-based positioning using deep neural networks requires a dataset that contains both CSI and associated location information. Channel charting (CC) only requires CSI information to extract relative position information. Since CC builds on dimensionality reduction, it can be implemented using autoencoders. In this paper, we propose a unified architecture based on Siamese networks that can be used for supervised UE positioning and unsupervised channel charting. In addition, our framework enables semisupervised positioning, where only a small set of location information is available during training. We use simulations to demonstrate that Siamese networks achieve similar or better performance than existing positioning and CC approaches with a single, unified neural network architecture.

/pdf/siamese-neural-networks-for-wireless-positioning-and-channel-537ongqlbz.pdf

Oscar Castaneda

Papers

1-bit Massive MU-MIMO Precoding in VLSI

1-bit Massive MU-MIMO Precoding in VLSI

Data Detection in Large Multi-Antenna Wireless Systems via Approximate Semidefinite Relaxation

POKEMON: A non-linear beamforming algorithm for 1-bit massive MIMO

Siamese Neural Networks for Wireless Positioning and Channel Charting