Cryptosystem designers frequently assume that secrets will be manipulated in closed, reliable computing environments. Unfortunately, actual computers and microchips leak information about the operations they process. This paper examines specific methods for analyzing power consumption measurements to find secret keys from tamper resistant devices. We also discuss approaches for building cryptosystems that can operate securely in existing hardware that leaks information.

/pdf/differential-power-analysis-4t7fjmuc7b.pdf

Differential Power Analysis

Millimeter-wave (mmW) frequencies between 30 and 300 GHz are a new frontier for cellular communication that offers the promise of orders of magnitude greater bandwidths combined with further gains via beamforming and spatial multiplexing from multielement antenna arrays. This paper surveys measurements and capacity studies to assess this technology with a focus on small cell deployments in urban environments. The conclusions are extremely encouraging; measurements in New York City at 28 and 73 GHz demonstrate that, even in an urban canyon environment, significant non-line-of-sight (NLOS) outdoor, street-level coverage is possible up to approximately 200 m from a potential low-power microcell or picocell base station. In addition, based on statistical channel models from these measurements, it is shown that mmW systems can offer more than an order of magnitude increase in capacity over current state-of-the-art 4G cellular networks at current cell densities. Cellular systems, however, will need to be significantly redesigned to fully achieve these gains. Specifically, the requirement of highly directional and adaptive transmissions, directional isolation between links, and significant possibilities of outage have strong implications on multiple access, channel structure, synchronization, and receiver design. To address these challenges, the paper discusses how various technologies including adaptive beamforming, multihop relaying, heterogeneous network architectures, and carrier aggregation can be leveraged in the mmW context.

Millimeter-Wave Cellular Wireless Networks: Potentials and Challenges

Communication at millimeter wave (mmWave) frequencies is defining a new era of wireless communication. The mmWave band offers higher bandwidth communication channels versus those presently used in commercial wireless systems. The applications of mmWave are immense: wireless local and personal area networks in the unlicensed band, 5G cellular systems, not to mention vehicular area networks, ad hoc networks, and wearables. Signal processing is critical for enabling the next generation of mmWave communication. Due to the use of large antenna arrays at the transmitter and receiver, combined with radio frequency and mixed signal power constraints, new multiple-input multiple-output (MIMO) communication signal processing techniques are needed. Because of the wide bandwidths, low complexity transceiver algorithms become important. There are opportunities to exploit techniques like compressed sensing for channel estimation and beamforming. This article provides an overview of signal processing challenges in mmWave wireless systems, with an emphasis on those faced by using MIMO communication at higher carrier frequencies.

An Overview of Signal Processing Techniques for Millimeter Wave MIMO Systems

With the severe spectrum shortage in conventional cellular bands, millimeter wave (mmW) frequencies between 30 and 300 GHz have been attracting growing attention as a possible candidate for next-generation micro- and picocellular wireless networks. The mmW bands offer orders of magnitude greater spectrum than current cellular allocations and enable very high-dimensional antenna arrays for further gains via beamforming and spatial multiplexing. This paper uses recent real-world measurements at 28 and 73 GHz in New York, NY, USA, to derive detailed spatial statistical models of the channels and uses these models to provide a realistic assessment of mmW micro- and picocellular networks in a dense urban deployment. Statistical models are derived for key channel parameters, including the path loss, number of spatial clusters, angular dispersion, and outage. It is found that, even in highly non-line-of-sight environments, strong signals can be detected 100-200 m from potential cell sites, potentially with multiple clusters to support spatial multiplexing. Moreover, a system simulation based on the models predicts that mmW systems can offer an order of magnitude increase in capacity over current state-of-the-art 4G cellular networks with no increase in cell density from current urban deployments.

http://apps.fcc.gov/ecfs/document/view;NEWECFSSESSION=ThTmVg1SGvsFqgxGKYfckQC26BmBGYLH2jpL5z0dMms1j21m5YTC!-1110365353!-349327291?id=60001013324

Millimeter Wave Channel Modeling and Cellular Capacity Evaluation

Gigantically comprehensive and carefully researched, Security Engineering makes it clear just how difficult it is to protect information systems from corruption, eavesdropping, unauthorized use, and general malice. Better, Ross Anderson offers a lot of thoughts on how information can be made more secure (though probably not absolutely secure, at least not forever) with the help of both technologies and management strategies. His work makes fascinating reading and will no doubt inspire considerable doubt--fear is probably a better choice of words--in anyone with information to gather, protect, or make decisions about. Be aware: This is absolutely not a book solely about computers, with yet another explanation of Alice and Bob and how they exchange public keys in order to exchange messages in secret. Anderson explores, for example, the ingenious ways in which European truck drivers defeat their vehicles' speed-logging equipment. In another section, he shows how the end of the cold war brought on a decline in defenses against radio-frequency monitoring (radio frequencies can be used to determine, at a distance, what's going on in systems--bank teller machines, say), and how similar technology can be used to reverse-engineer the calculations that go on inside smart cards. In almost 600 pages of riveting detail, Anderson warns us not to be seduced by the latest defensive technologies, never to underestimate human ingenuity, and always use common sense in defending valuables. A terrific read for security professionals and general readers alike. --David Wall Topics covered: How some people go about protecting valuable things (particularly, but not exclusively, information) and how other people go about getting it anyway. Mostly, this takes the form of essays (about, for example, how the U.S. Air Force keeps its nukes out of the wrong hands) and stories (one of which tells of an art thief who defeated the latest technology by hiding in a closet). Sections deal with technologies, policies, psychology, and legal matters.

Security Engineering: A Guide to Building Dependable Distributed Systems

This article addresses basic issues regarding the design and development of wireless access and wireless LAN systems that will operate in the 60 GHz band as part of the fourth-generation (4G) system. The 60 GHz band is of much interest since this is the band in which a massive amount of spectral space (5 GHz) has been allocated worldwide for dense wireless local communications. The article gives an overview of 60 GHz channel characteristics and puts them in their true perspective. In addition, we discuss how to achieve the exploitation of the abundant bandwidth resource for all kinds of short-range communications. The main tenor is that an overall system architecture should be worked out that provides industry with plenty of scope for product differentiation. This architecture should feature affordability, scalability, modularity, extendibility, and interoperability. In addition, user convenience and easy and efficient network deployment are important prerequisites for market success. This article discusses these features and indicates a number of key research topics.

/pdf/exploiting-the-60-ghz-band-for-local-wireless-multimedia-45v66xnl1s.pdf

Exploiting the 60 GHz band for local wireless multimedia access: prospects and future directions

An extensive review of the statistical characterization of 60-GHz indoor radio channels is provided from a large number of published measurement and modeling results. First, the most prominent driver applications for 60 GHz are considered in order to identify those environment types that need to be characterized most urgently. Large-scale fading is addressed yielding path-loss parameter values for a generic 60-GHz indoor channel model as well as for the office environment in particular. In addition, the small-scale channel behavior is reviewed including the modeling of time-of-arrival and angle-of-arrival details and statistical parameters related to delay spread, angular spread and Doppler spread. Finally, some research directions for future channel characterization are given.

/pdf/statistical-characterization-of-60-ghz-indoor-radio-channels-5cprmn2v8e.pdf

Statistical Characterization of 60-GHz Indoor Radio Channels

Extensive measurements are conducted in room environments at 60 GHz to analyze the channel characteristics for various channel configurations. Channel parameters retrieved from measurements are presented and analyzed based on generic channel models. Particularly, a simple single-cluster model is applied for the parameter retrieval and performance evaluation. By this model, power delay profiles are simply described by a K-factor, a root-mean-squared delay spread, and a shape parameter. The considered channels are configured with the combination of omnidirectional, fan-beam, and pencil-beam antennas at transmitter and receiver sides. Both line-of-sight (LOS) and non-LOS (NLOS) channels are considered. Further, to evaluate the transmission performance, we analyze the link budget in the considered environments, then design and simulate an OFDM system with a data rate of 2 Gbps to compare the bit-error-rate (BER) performance by using the measured and modeled channels. Both coded and uncoded OFDM systems are simulated. It is observed that the BER performance agrees well for the measured and modeled channels. In addition, directive configurations can provide sufficient link margins and BER performance for high data rate communications. To increase the coverage and performance in the NLOS area, it is preferable to apply directive antennas.

/pdf/channel-characteristics-and-transmission-performance-for-4g37qj2pwp.pdf

Channel characteristics and transmission performance for various channel configurations at 60 GHz

Wideband measurements of indoor radio channels operating in a 2 GHz frequency band centred around 58 GHz were performed using a frequency step sounding technique. The results are presented of cell coverage and RMS delay spreas under both line-of-sight (LOS) and obstructed (OBS) situations.

Wideband indoor radio propagation measurements at 58 GHz

This article reviews, discusses, and proposes crucial 60-GHz radio design options. First, it discusses the choice of integrated circuit technology for the radio frequency (RF) part and presents the status quo concerning standardization. Then, it describes the 60-GHz channel-propagation characteristics and proposes antenna solutions, as well as the architecture of the RF part, including a channelization scheme and frequency synthesizer architecture. With regard to the baseband part, we discuss the use of multicarrier modulation and compare it to single-carrier modulation. Finally, we demonstrate the consequences of the various design options as judged from link-budget calculations.

P.F.M. Smulders

Papers

Exploiting the 60 GHz band for local wireless multimedia access: prospects and future directions

Statistical Characterization of 60-GHz Indoor Radio Channels

Channel characteristics and transmission performance for various channel configurations at 60 GHz

Wideband indoor radio propagation measurements at 58 GHz

On the Design of Low-Cost 60-GHz Radios for Multigigabit-per-Second Transmission over Short Distances [Topics in Radio Communications]