Showing papers in "Eurasip Journal on Wireless Communications and Networking in 2007"

Survey of channel and radio propagation models for wireless MIMO systems

Abstract: This paper provides an overview of the state-of-the-art radio propagation and channel models for wireless multiple-input multiple-output (MIMO) systems. We distinguish between physical models and analytical models and discuss popular examples from both model types. Physical models focus on the double-directional propagation mechanisms between the location of transmitter and receiver without taking the antenna configuration into account. Analytical models capture physical wave propagation and antenna configuration simultaneously by describing the impulse response (equivalently, the transfer function) between the antenna arrays at both link ends. We also review some MIMO models that are included in current standardization activities for the purpose of reproducible and comparable MIMO system evaluations. Finally, we describe a couple of key features of channels and radio propagation which are not sufficiently included in current MIMO models.

An overview of multigigabit wireless through millimeter wave technology: potentials and technical challenges

Abstract: This paper presents an overview of 60 GHz technology and its potentials to provide next generation multigigabit wireless communications systems. We begin by reviewing the state-of-art of the 60 GHz radio. Then, the current status of worldwide regulatory efforts and standardization activities for 60 GHz band is summarized. As a result of the worldwide unlicensed 60 GHz band allocation, a number of key applications can be identified using millimeter-wave technology. Despite of its huge potentials to achieve multigigabit wireless communications, 60 GHz radio presents a series of technical challenges that needs to be resolved before its full deployment. Specifically, we will focus on the link budget analysis from the 60 GHz radio propagation standpoint and highlight the roles of antennas in establishing a reliable 60 GHz radio.

60-GHz millimeter-wave radio: principle, technology, and new Results

Abstract: The worldwide opening of a massive amount of unlicensed spectra around 60 GHz has triggered great interest in developing affordable 60-GHz radios. This interest has been catalyzed by recent advance of 60-GHz front-end technologies. This paper briefly reports recent work in the 60-GHz radio. Aspects addressed in this paper include global regulatory and standardization, justification of using the 60-GHz bands, 60-GHz consumer electronics applications, radio system concept, 60-GHz propagation and antennas, and key issues in system design. Some new simulation results are also given. Potentials and problems are explained in detail.

HUMS: An Autonomous Moving Strategy for Mobile Sinks in Data-Gathering Sensor Networks

Abstract: Sink mobility has attracted much research interest in recent years because it can improve network performance such as energy efficiency and throughput. An energy-unconscious moving strategy is potentially harmful to the balance of the energy consumption among sensor nodes so as to aggravate the hotspot problem of sensor networks. In this paper, we propose an autonomous moving strategy for the mobile sinks in data-gathering applications. In our solution, a mobile sink approaches the nodes with high residual energy to force them to forward data for other nodes and tries to avoid passing by the nodes with low energy. We performed simulation experiments to compare our solution with other three data-gathering schemes. The simulation results show that our strategy cannot only extend network lifetime notably but also provides scalability and topology adaptability.

Distributed Time Synchronization in Wireless Sensor Networks with Coupled Discrete-Time Oscillators

Abstract: In wireless sensor networks, distributed timing synchronization based on pulse-coupled oscillators at the physical layer is currently being investigated as an interesting alternative to packet synchronization. In this paper, the convergence properties of such a system are studied through algebraic graph theory, by modeling the nodes as discrete-time clocks. A general scenario where clocks may have different free-oscillation frequencies is considered, and both time-invariant and time-variant network topologies (or fading channels) are discussed. Furthermore, it is shown that the system of oscillators can be studied as a set of coupled discrete-time PLLs. Based on this observation, a generalized system design is discussed, and it is proved that known results in the context of conventional PLLs for carrier acquisition have a counterpart in distributed systems. Finally, practical details of the implementation of the distributed synchronization algorithm over a bandlimited noisy channel are covered.

Channel characteristics and transmission performance for various channel configurations at 60 GHz

Abstract: Extensive measurements are conducted in room environments at 60 GHz to analyze the channel characteristics for various channel configurations. Channel parameters retrieved from measurements are presented and analyzed based on generic channel models. Particularly, a simple single-cluster model is applied for the parameter retrieval and performance evaluation. By this model, power delay profiles are simply described by a K-factor, a root-mean-squared delay spread, and a shape parameter. The considered channels are configured with the combination of omnidirectional, fan-beam, and pencil-beam antennas at transmitter and receiver sides. Both line-of-sight (LOS) and non-LOS (NLOS) channels are considered. Further, to evaluate the transmission performance, we analyze the link budget in the considered environments, then design and simulate an OFDM system with a data rate of 2 Gbps to compare the bit-error-rate (BER) performance by using the measured and modeled channels. Both coded and uncoded OFDM systems are simulated. It is observed that the BER performance agrees well for the measured and modeled channels. In addition, directive configurations can provide sufficient link margins and BER performance for high data rate communications. To increase the coverage and performance in the NLOS area, it is preferable to apply directive antennas.

Wireless sensor networks: performance analysis in indoor scenarios

Abstract: We evaluate the performance of realistic wireless sensor networks in indoor scenarios. Most of the considered networks are formed by nodes using the Zigbee communication protocol. For comparison, we also analyze networks based on the proprietary standard Z-Wave. Two main groups of network scenarios are proposed: (i) scenarios with direct transmissions between the remote nodes and the network coordinator, and (ii) scenarios with routers, which relay the packets between the remote nodes and the coordinator. The sensor networks of interest are evaluated considering different performance metrics. In particular, we show how the received signal strength indication (RSSI) behaves in the considered scenarios. Then, the network behavior is characterized in terms of end-to-end delay and throughput. In order to confirm the experiments, analytical and simulation results are also derived.

Spatial-temporal correlation properties of the 3GPP spatial channel model and the kronecker MIMO channel model

Abstract: The performance of multiple-input multiple-output (MIMO) systems is greatly influenced by the spatial-temporal correlation properties of the underlying MIMO channels. This paper investigates the spatial-temporal correlation characteristics of the spatial channel model (SCM) in the Third Generation Partnership Project (3GPP) and the Kronecker-based stochastic model (KBSM) at three levels, namely, the cluster level, link level, and system level. The KBSM has both the spatial separability and spatial-temporal separability at all the three levels. The spatial-temporal separability is observed for the SCM only at the system level, but not at the cluster and link levels. The SCM shows the spatial separability at the link and system levels, but not at the cluster level since its spatial correlation is related to the joint distribution of the angle of arrival (AoA) and angle of departure (AoD). The KBSM with the Gaussian-shaped power azimuth spectrum (PAS) is found to fit best the 3GPP SCM in terms of the spatial correlations. Despite its simplicity and analytical tractability, the KBSM is restricted to model only the average spatial-temporal behavior of MIMO channels. The SCM provides more insights of the variations of different MIMO channel realizations, but the implementation complexity is relatively high.

Polarization behavior of discrete multipath and diffuse scattering in urban environments at 4.5 GHz

Abstract: The polarization behavior of the mobile MIMO radio channel is analyzed from polarimetric double-directional channel measurements, which were performed in a macrocell rural environment in Tokyo. The recorded data comprise non-line-of-sight, obstructed line-of-sight, and line-of-sight conditions. The gradient-based maximum-likelihood estimation framework RIMAX was used to estimate both specular and dense multipath components. Joint angular-delay results are gained only for the specular components. The dense multipath components, which may be attributed to diffuse scattering, can be characterized only in delay domain. Different characteristics describing the polarization behavior and power-weighted cross- and copolarization ratios for both types of components are introduced. Statistical analysis of long measurement track segments indicates global trends, whereas local analysis emphasizes specific behavior such as polarization dependency on angle of incidence in streets and under shadowing conditions. The results also underline the importance of modeling changing and transient propagation scenarios which are currently not common in available MIMO channel models.

ASAP: a MAC protocol for dense and time-constrained RFID systems

Abstract: We introduce a novel medium access control (MAC) protocol for radio frequency identification (RFID) systems which exploits the statistical information collected at the reader. The protocol, termed adaptive slotted ALOHA protocol (ASAP), is motivated by the need to significantly improve the total read time performance of the currently suggested MAC protocols for RFID systems. In order to accomplish this task, ASAP estimates the dynamic tag population and adapts the frame size in the subsequent round via a simple policy that maximizes an appropriately defined efficiency function. We demonstrate that ASAP provides significant improvement in total read time performance over the current RFID MAC protocols. We next extend the design to accomplish reliable performance of ASAP in realistic scenarios such as the existence of constraints on frame size, and mobile RFID systems where tags move at constant velocity in the reader's field. We also consider the case where tags may fail to respond because of a physical breakdown or a temporary malfunction, and show the robustness in those scenarios as well.

Inter-and intrasite correlations of large-scale parameters from macrocellular measurements at 1800 MHz

Abstract: The inter- and intrasite correlation properties of shadow fading and power-weighted angle spread at both the mobile station and the base station are studied utilizing narrowband multisite MIMO measurements in the 1800MHz band. The influence of the distance between two base stations on the correlation is studied in an urban environment. Measurements have been conducted for two different situations: widely separated as well as closely located base stations. Novel results regarding the correlation of the power-weighted angle spread between base station sites with different separations are presented. Furthermore, the measurements and analysis presented herein confirm the autocorrelation and cross-correlation properties of the shadow fading and the angle spread that have been observed in previous studies.

Characterization and Optimization of LDPC Codes for the 2-User Gaussian Multiple Access Channel

Abstract: We address the problem of designing good LDPC codes for the Gaussian multiple access channel (MAC). The framework we choose is to design multiuser LDPC codes with joint belief propagation decoding on the joint graph of the 2-user case. Our main result compared to existing work is to express analytically EXIT functions of the multiuser decoder with two different approximations of the density evolution. This allows us to propose a very simple linear programming optimization for the complicated problem of LDPC code design with joint multiuser decoding. The stability condition for our case is derived and used in the optimization constraints. The codes that we obtain for the 2-user case are quite good for various rates, especially if we consider the very simple optimization procedure.

Fault-tolerant target localization in sensor networks

Abstract: Fault-tolerant target detection and localization is a challenging task in collaborative sensor networks. This paper introduces our exploratory work toward identifying the targets in sensor networks with faulty sensors. We explore both spatial and temporal dimensions for data aggregation to decrease the false alarm rate and improve the target position accuracy. To filter out extreme measurements, the median of all readings in a close neighborhood of a sensor is used to approximate its local observation to the targets. The sensor whose observation is a local maxima computes a position estimate at each epoch. Results from multiple epoches are combined together to further decrease the false alarm rate and improve the target localization accuracy. Our algorithms have low computation and communication overheads. Simulation study demonstrates the validity and efficiency of our design.

Multi-satellite MIMO communications at Ku-band and above: investigations on spatial multiplexing for capacity improvement and selection diversity for interference mitigation

Abstract: This paper investigates the applicability of multiple-input multiple-output (MIMO) technology to satellite communications at the Ku-band and above. After introducing the possible diversity sources to form a MIMO matrix channel in a satellite environment, particular emphasis is put on satellite diversity. Two specific different topics from the field of MIMO technology applications to satellite communications at these frequencies are further analyzed: (i) capacity improvement achieved by MIMO spatial multiplexing systems and (ii) interference mitigation achieved by MIMO diversity systems employing receive antenna selection. In the first case, a single-user capacity analysis of a satellite 2 × 2 MIMO spatial multiplexing system is presented and a useful analytical closed form expression is derived for the outage capacity achieved. In the second case, a satellite 2 × 2 MIMO diversity system with receive antenna selection is considered, adjacent satellite cochannel interference on its forward link is studied and an analytical model predicting the interference mitigation achieved is presented. In both cases, an appropriate physical MIMO channel model is assumed which takes into account the propagation phenomena related to the frequencies of interest, such as clear line-of-sight operation, high antenna directivity, the effect of rain fading, and the slant path lengths difference. Useful numerical results obtained through the analytical expressions derived are presented to compare the performance of multi-satellite MIMO systems to relevant single-input single-output (SISO) ones.

Optimal design of uniform rectangular antenna arrays for strong line-of-sight MIMO channels

Abstract: We investigate the optimal design of uniform rectangular arrays (URAs) employed in multiple-input multiple-output communications, where a strong line-of-sight (LOS) component is present. A general geometrical model is introduced to model the LOS component, which allows for any orientation of the transmit and receive arrays, and incorporates the uniform linear array as a special case of the URA. A spherical wave propagation model is used. Based on this model, we derive the optimal array design equations with respect to mutual information, resulting in orthogonal LOS subchannels. The equations reveal that it is the distance between the antennas projected onto the plane perpendicular to the transmission direction that is of importance with respect to design. Further, we investigate the influence of nonoptimal design, and derive analytical expressions for the singular values of the LOS matrix as a function of the quality of the array design. To evaluate a more realistic channel, the LOS channel matrix is employed in a Ricean channel model. Performance results show that even with some deviation from the optimal design, we get better performance than in the case of uncorrelated Rayleigh subchannels.

Millimeter-Wave Wireless Communication Systems: Theory and Applications

Abstract: • A submitted manuscript is the version of the article upon submission and before peer-review. There can be important differences between the submitted version and the official published version of record. People interested in the research are advised to contact the author for the final version of the publication, or visit the DOI to the publisher's website. • The final author version and the galley proof are versions of the publication after peer review. • The final published version features the final layout of the paper including the volume, issue and page numbers.

Intelligent broadcasting inmobile ad hoc networks: three classes of adaptive protocols

Abstract: Because adaptability greatly improves the performance of a broadcast protocol, we identify three ways in which machine learning can be applied to broadcasting in a mobile ad hoc network (MANET). We chose broadcasting because it functions as a foundation of MANET communication. Unicast, multicast, and geocast protocols utilize broadcasting as a building block, providing important control and route establishment functionality. Therefore, any improvements to the process of broadcasting can be immediately realized by higher-level MANET functionality and applications. While efficient broadcast protocols have been proposed, no single broadcasting protocol works well in all possible MANET conditions. Furthermore, protocols tend to fail catastrophically in severe network environments. Our three classes of adaptive protocols are pure machine learning, intra-protocol learning, and inter-protocol learning. In the pure machine learning approach, we exhibit a new approach to the design of a broadcast protocol: the decision of whether to rebroadcast a packet is cast as a classification problem. Each mobile node (MN) builds a classifier and trains it on data collected from the network environment. Using intra-protocol learning, each MN consults a simple machine model for the optimal value of one of its free parameters. Lastly, in inter-protocol learning, MNs learn to switch between different broadcasting protocols based on network conditions. For each class of learning method, we create a prototypical protocol and examine its performance in simulation.

Efficient delay tracking methods with sidelobes cancellation for BOC-modulated signals

Abstract: In positioning applications, where the line of sight (LOS) is needed with high accuracy, the accurate delay estimation is an important task. The new satellite-based positioning systems, such as Galileo and modernized GPS, will use a new modulation type, that is, the binary offset carrier (BOC) modulation. This type of modulation creates multiple peaks (ambiguities) in the envelope of the correlation function, and thus triggers new challenges in the delay-frequency acquisition and tracking stages. Moreover, the properties of BOC-modulated signals are yet not well studied in the context of fading multipath channels. In this paper, sidelobe cancellation techniques are applied with various tracking structures in order to remove or diminish the side peaks, while keeping a sharp and narrow main lobe, thus allowing a better tracking. Five sidelobe cancellation methods (SCM) are proposed and studied: SCM with interference cancellation (IC), SCM with narrow correlator, SCM with high-resolution correlator (HRC), SCM with differential correlation (DC), and SCM with threshold. Compared to other delay tracking methods, the proposed SCM approaches have the advantage that they can be applied to any sine or cosine BOC-modulated signal. We analyze the performances of various tracking techniques in the presence of fading multipath channels and we compare them with other methods existing in the literature. The SCM approaches bring improvement also in scenarios with closely-spaced paths, which are the most problematic from the accurate positioning point of view.

An analysis framework for mobility metrics in mobile ad hoc networks

Abstract: Mobile ad hoc networks (MANETs) have inherently dynamic topologies. Under these difficult circumstances, it is essential to have some dependable way of determining the reliability of communication paths. Mobility metrics are well suited to this purpose. Several mobility metrics have been proposed in the literature, including link persistence, link duration, link availability, link residual time, and their path equivalents. However, no method has been provided for their exact calculation. Instead, only statistical approximations have been given. In this paper, exact expressions are derived for each of the aforementioned metrics, applicable to both links and paths. We further show relationships between the different metrics, where they exist. Such exact expressions constitute precise mathematical relationships between network connectivity and node mobility. These expressions can, therefore, be employed in a number of ways to improve performance of MANETs such as in the development of efficient algorithms for routing, in route caching, proactive routing, and clustering schemes.

Smart MIMO: an energy-aware adaptive MIMO-OFDM radio link control for next-generation wireless local area networks

Abstract: Multiantenna systems and more particularly those operating on multiple input and multiple output (MIMO) channels are currently a must to improve wireless links spectrum efficiency and/or robustness. There exists a fundamental tradeoff between potential spectrum efficiency and robustness increase. However, multiantenna techniques also come with an overhead in silicon implementation area and power consumption due, at least, to the duplication of part of the transmitter and receiver radio front-ends. Although the area overhead may be acceptable in view of the performance improvement, low power consumption must be preserved for integration in nomadic devices. In this case, it is the tradeoff between performance (e.g., the net throughput on top of the medium access control layer) and average power consumption that really matters. It has been shown that adaptive schemes were mandatory to avoid that multiantenna techniques hamper this system tradeoff. In this paper, we derive smart MIMO: an adaptive multiantenna approach which, next to simply adapting the modulation and code rate as traditionally considered, decides packet-per-packet, depending on the MIMO channel state, to use either space-division multiplexing (increasing spectrum efficiency), space-time coding (increasing robustness), or to stick to single-antenna transmission. Contrarily tomany of such adaptive schemes, the focus is set on using multiantenna transmission to improve the link energy efficiency in real operation conditions. Based on a model calibrated on an existing reconfigurable multiantenna transceiver setup, the link energy efficiency with the proposed scheme is shown to be improved by up to 30% when compared to nonadaptive schemes. The average throughput is, on the other hand, improved by up to 50% when compared to single-antenna transmission.

Reseach Article Channel Impulse Response Length and Noise Variance Estimation for OFDM Systems with Adaptive Guard Interval

Abstract: A new algorithm estimating channel impulse response (CIR) length and noise variance for orthogonal frequency-division multiplexing (OFDM) systems with adaptive guard interval (GI) length is proposed. To estimate the CIR length and the noise variance, the different statistical characteristics of the additive noise and the mobile radio channels are exploited. This difference is due to the fact that the variance of the channel coefficients depends on the position within the CIR, whereas the noise variance of each estimated channel tap is equal. Moreover, the channel can vary rapidly, but its length changes more slowly than its coefficients. An auxiliary function is established to distinguish these characteristics. The CIR length and the noise variance are estimated by varying the parameters of this function. The proposed method provides reliable information of the estimated CIR length and the noise variance even at signal-to-noise ratio (SNR) of 0 dB. This information can be applied to an OFDM system with adaptive GI length, where the length of the GI is adapted to the current length of the CIR. The length of the GI can therefore be optimized. Consequently, the spectral efficiency of the system is increased.

An energy-efficient adaptive modulation suitable for wireless sensor networks with SER and throughput constraints

Abstract: We consider the problem of minimizing transmission energy in wireless sensor networks by taking into account that every sensor may require a different bit rate and reliability according to its particular application. We propose a cross-layer approach to tackle such a minimization in centralized networks for the total transmission energy consumption of the network: in the physical layer, for each sensor the sink estimates the channel gain and adaptively selects a modulation scheme; in the MAC layer, each sensor is correspondingly assigned a number of time slots. The modulation level and the number of allocated time slots for every sensor are constrained to attain their applications bit rates in a global energy-efficient manner. The signal-to-noise ratio gap approximation is used in our exposition in order to jointly handle required bit rates, transmission energies, and symbol error rates.

On traffic load distribution and load balancing in dense wireless multihop networks

Abstract: We study the load balancing problem in a dense wireless multihop network, where a typical path consists of a large number of hops, that is, the spatial scales of a typical distance between source and destination and mean distance between the neighboring nodes are strongly separated. In this limit, we present a general framework for analyzing the traffic load resulting from a given set of paths and traffic demands. We formulate the load balancing problem as a minmax problem and give two lower bounds for the achievable minimal maximum traffic load. The framework is illustrated by considering the load balancing problem of uniformly distributed traffic demands in a unit disk. For this special case, we derive efficient expressions for computing the resulting traffic load for a given set of paths. By using these expressions, we are able to optimize a parameterized set of paths yielding a particularly flat traffic load distribution which decreases the maximum traffic load in the network by 40% in comparison with the shortest-path routing.

A comprehensive evaluation of indoor ranging using ultra-wideband technology

Abstract: Ultra-wideband technology shows promise for precision ranging due to its fine time resolution to resolve multipath fading and the presence of lower frequencies in the baseband to penetrate walls.While a concerted effort has been conducted in the extensive modeling of the indoor UWB channel in recent years, to our knowledge only two papers have reported ranging performance, but for limited range and fixed bandwidth and center frequency. In principle, boosting power can guarantee connectivity between transmitter and receiver, but not precision due to the distorting effects of walls and other objects in the direct path. In order to gauge the limits of UWB ranging, we carry out 5000 measurements up to an unprecedented 45m in non-line-of-sight conditions in four separate buildings with dominant wall material varying from sheet rock to steel. In addition, we report performance for varying bandwidth and center frequency of the system.

Channel impulse response length and noise variance estimation for OFDM systems with adaptive guard interval

Abstract: A new algorithm estimating channel impulse response (CIR) length and noise variance for orthogonal frequency-division multiplexing (OFDM) systems with adaptive guard interval (GI) length is proposed. To estimate the CIR length and the noise variance, the different statistical characteristics of the additive noise and the mobile radio channels are exploited. This difference is due to the fact that the variance of the channel coefficients depends on the position within the CIR, whereas the noise variance of each estimated channel tap is equal. Moreover, the channel can vary rapidly, but its length changes more slowly than its coefficients. An auxiliary function is established to distinguish these characteristics. The CIR length and the noise variance are estimated by varying the parameters of this function. The proposed method provides reliable information of the estimated CIR length and the noise variance even at signal-to-noise ratio (SNR) of 0 dB. This information can be applied to an OFDM system with adaptive GI length, where the length of the GI is adapted to the current length of the CIR. The length of the GI can therefore be optimized. Consequently, the spectral efficiency of the system is increased.

Wireless mesh networks to support video surveillance: architecture, protocol, and implementation issues

Abstract: Current video-surveillance systems typically consist of many video sources distributed over a wide area, transmitting live video streams to a central location for processing and monitoring. The target of this paper is to present an experience of implementation of a large-scale video-surveillance system based on a wireless mesh network infrastructure, discussing architecture, protocol, and implementation issues. More specifically, the paper proposes an architecture for a video-surveillance system, and mainly centers its focus on the routing protocol to be used in the wireless mesh network, evaluating its impact on performance at the receiver side. A wireless mesh network was chosen to support a video-surveillance application in order to reduce the overall system costs and increase scalability and performance. The paper analyzes the performance of the network in order to choose design parameters that will achieve the best trade-off between video encoding quality and the network traffic generated.

Characteristics of MIMO-OFDM channels in indoor environments

Abstract: We present the results of multiple-input multiple-output orthogonal frequency-division multiplexing (MIMO-OFDM) channel measurements. The measurements were performed in indoor environments using four transmitters and four receivers with 40MHz bandwidth at 5.25 GHz. Our measurements reveal two-dimensional small-scale fading, and correlation between MIMO subchannels. In the line-of-sight (LoS) case, the MIMO-OFDM channel capacity is found to be strongly dependent on the local scattering environment; and much less dependent in the non-LoS (NLoS) case. Also, MIMO channel capacity is found to be largely uncorrelated over 20MHz in NLoS, while a strong correlation is found over 40MHz in some LoS environments. The validity of the conventional Kronecker correlation channel model is tested, along with a recently proposed joint correlation model. The effects of varying antenna element spacing are also investigated, taking into account such effects as mutual coupling, radiation efficiency, and radiation pattern.

Adaptive bandwidth management and joint call Admission control to enhance system utilization and QoS in heterogeneous wireless networks

Abstract: The coexistence of different cellular networks in the same area necessitates joint radio resource management for enhanced QoS provisioning and efficient radio resource utilization. We propose adaptive bandwidth management and joint call admission control (JCAC) scheme for heterogeneous cellular networks. The objectives of the proposed adaptive JCAC scheme are to enhance average system utilization, guarantee QoS requirements of all accepted calls, and reduce new call blocking probability and handoff call dropping probability in heterogeneous wireless networks. We develop a Markov chain model for the adaptive JCAC scheme and derive new call blocking probability, handoff call dropping probability, and average system utilization. Performance of the proposed adaptive JCAC scheme is compared with that of nonadaptive JCAC scheme in the same heterogeneous wireless network. Results show an improvement in average system utilization of up to 20%. Results also show that connection-level QoS can be significantly improved by using the proposed adaptive JCAC scheme.

Enhancement of unequal error protection properties of LDPC codes

Abstract: It has been widely recognized in the literature that irregular low-density parity-check (LDPC) codes exhibit naturally an unequal error protection (UEP) behavior. In this paper, we propose a general method to emphasize and control the UEP properties of LDPC codes. The method is based on a hierarchical optimization of the bit node irregularity profile for each sensitivity class within the codeword by maximizing the average bit node degree while guaranteeing a minimum degree as high as possible. We show that this optimization strategy is efficient, since the codes that we optimize show better UEP capabilities than the codes optimized for the additive white Gaussian noise channel.