DC microgrids (MGs) have been gaining a continually increasing interest over the past couple of years both in academia and industry. The advantages of dc distribution when compared to its ac counterpart are well known. The most important ones include higher reliability and efficiency, simpler control and natural interface with renewable energy sources, and electronic loads and energy storage systems. With rapid emergence of these components in modern power systems, the importance of dc in today's society is gradually being brought to a whole new level. A broad class of traditional dc distribution applications, such as traction, telecom, vehicular, and distributed power systems can be classified under dc MG framework and ongoing development, and expansion of the field is largely influenced by concepts used over there. This paper aims first to shed light on the practical design aspects of dc MG technology concerning typical power hardware topologies and their suitability for different emerging smart grid applications. Then, an overview of the state of the art in dc MG protection and grounding is provided. Owing to the fact that there is no zero-current crossing, an arc that appears upon breaking dc current cannot be extinguished naturally, making the protection of dc MGs a challenging problem. In relation with this, a comprehensive overview of protection schemes, which discusses both design of practical protective devices and their integration into overall protection systems, is provided. Closely coupled with protection, conflicting grounding objectives, e.g., minimization of stray current and common-mode voltage, are explained and several practical solutions are presented. Also, standardization efforts for dc systems are addressed. Finally, concluding remarks and important future research directions are pointed out.

/pdf/dc-microgrids-part-ii-a-review-of-power-architectures-69j8nn2rpd.pdf

DC Microgrids—Part II: A Review of Power Architectures, Applications, and Standardization Issues

Although it has long been argued that electronic power converters can help improve system controllability, reliability, size, and efficiency, their penetration in power systems is still quite low. The often-cited barriers of higher cost and lower reliability of the power converters are quite high if power electronics is used as direct, one-to-one, replacement for the existing electromechanical equipment. However, if the whole power distribution system were designed as a system of controllable converters, the overall system cost and reliability could actually improve, as is currently the case at low power levels within computer and telecom equipment. Starting from the example of a computer power system, the paper contemplates possible future ac and dc electronic power distribution system architectures, especially in the presence of renewable energy sources. The proposed nanogrid-microgrid-…-grid structure achieves hierarchical dynamic decoupling of generation, distribution, and consumption by using bidirectional converters as energy control centers. This is illustrated by the description and simulation of static and dynamic operation of a dc nanogrid in a hypothetical future sustainable home. Several ideas for modeling, analysis, and system-level design of such systems, including power flow control, protection, stability, and subsystem interactions, are presented.

Future electronic power distribution systems a contemplative view

DC microgrids and distribution systems: An overview

To meet the fast-growing energy demand and, at the same time, tackle environmental concerns resulting from conventional energy sources, renewable energy sources are getting integrated in power networks to ensure reliable and affordable energy for the public and industrial sectors However, the integration of renewable energy in the ageing electrical grids can result in new risks/challenges, such as security of supply, base load energy capacity, seasonal effects, and so on Recent research and development in microgrids have proved that microgrids, which are fueled by renewable energy sources and managed by smart grids (use of smart sensors and smart energy management system), can offer higher reliability and more efficient energy systems in a cost-effective manner Further improvement in the reliability and efficiency of electrical grids can be achieved by utilizing dc distribution in microgrid systems DC microgrid is an attractive technology in the modern electrical grid system because of its natural interface with renewable energy sources, electric loads, and energy storage systems In the recent past, an increase in research work has been observed in the area of dc microgrid, which brings this technology closer to practical implementation This paper presents the state-of-the-art dc microgrid technology that covers ac interfaces, architectures, possible grounding schemes, power quality issues, and communication systems The advantages of dc grids can be harvested in many applications to improve their reliability and efficiency This paper also discusses benefits and challenges of using dc grid systems in several applications This paper highlights the urgent need of standardizations for dc microgrid technology and presents recent updates in this area

DC Microgrid Technology: System Architectures, AC Grid Interfaces, Grounding Schemes, Power Quality, Communication Networks, Applications, and Standardizations Aspects

Isolated high-output current DC/DC converters are critical for future data center power architecture. LLC converters with matrix transformer are suitable for these applications due to its high efficiency and high power density. Different matrix transformer structures are investigated in this paper. To improve the current design practice, a high-frequency transformer loss model is developed and a detailed design methodology is proposed. Moreover, a novel matrix transformer structure is proposed to integrate four elemental transformers into one magnetic core with simple four-layer print circuit board windings implementation and further reduced core loss. By pushing switching frequency up to megahertz with GaN devices, the proposed matrix transformer can achieve high efficiency, high power density, and automatic manufacturing for magnetic components. A 1-MHz 380 V/12 V 800-W LLC converter with GaN devices is demonstrated. The prototype achieves a peak efficiency of 97.6% and a power density of 900 W/in3.

High-Efficiency High-Power-Density LLC Converter With an Integrated Planar Matrix Transformer for High-Output Current Applications

In a typical data center, less than half the energy consumed is delivered to the compute load, with the rest lost in power conversion, distribution and cooling. Traditionally power distribution is at 400/480 V AC in data centers and at -48 V DC in telco facilities. Higher voltage DC has been proposed as an energy efficient distribution option for both types of facilities, and this paper presents an analytical evaluation of several data center power delivery architectures over a range of loads, showing that a 400 V facility-level DC distribution option is the most efficient. The equipment required to support such an architecture is discussed and results from a small scale demonstration are included.

Evaluation of 400V DC distribution in telco and data centers to improve energy efficiency

A switched capacitor converter has a supply voltage input, an output circuit with one or more load capacitors, a semiconductor switch network. The switch network is connected at a switch junction point and across the voltage input, and has one or more pairs of said first and second switches. Each pair of switches is associated with one of the load capacitors and each pair is connected in series. The converter also has a charging capacitor network connected across the semiconductor switch network and across the voltage input. The charging capacitor network has one or more charging capacitors and inductances connected between the switch junction point and the output circuit. Each of the charging capacitors and inductances is associated with one of the load capacitors. The load capacitors are each charged by the associated charging capacitor when the associated first switch is closed and the associated second switch is open. And the load capacitors are each discharged by the associated inductance when the associated first switch is closed and the associated second switch is open.

Switched capacitor converters

Realistic estimation of power MOSFET switching losses is critical for predicting the maximum junction temperature and efficiency of power electronics circuits. The purpose of this paper is to investigate the internal physics of MOSFET switching processes using a physically based semiconductor device modeling approach, and subsequently examine the commonly used power loss calculation method based on the new physical insights. The widely accepted output capacitance loss term in this calculation method is found to be redundant and erroneous. In addition, the current method of approximating switching times with power MOSFET gate charge parameters grossly overestimates the switching power loss. This paper recommends a new MOSFET gate charge parameter specification and an effective switching time estimation method to compensate for the power loss calculation error introduced by the two slope voltage transition waveform of the power MOSFET.

Power MOSFET Switching Loss Analysis: A New Insight

A fully integrated digitally controlled two-phase buck voltage regulator (VR) with on-die solenoid inductors with a planar magnetic core is demonstrated in 14-nm tri-gate CMOS for fine-grained power delivery/management domains of high power density in system-on-chips while enabling ultra-thin (z-height) packages. The VR achieves 1-A/mm2 power density for 400-mA load current with a measured peak efficiency of 84% at 100-MHz switching frequency including a digital PWM with >9 bits (8 ps) of resolution.

A Digitally Controlled Fully Integrated Voltage Regulator With On-Die Solenoid Inductor With Planar Magnetic Core in 14-nm Tri-Gate CMOS

A fully on-die, digitally controlled, 500MHz switching, 250mA rated output buck Voltage Regulator (VR) implemented in 22nm Tri-Gate CMOS is presented. The silicon measured a peak efficiency of 68% and consumed an area of 0.6mm
 2
 (without output decoupling) with a power density of about 410 mW/mm
 2
. The paper also demonstrates a controller bandwidth of 43MHz; the highest reported to date for any digital controller, resulting in output voltage ramp rates as high as 10V/μsec.

Pavan Kumar

Papers

Evaluation of 400V DC distribution in telco and data centers to improve energy efficiency

Switched capacitor converters

Power MOSFET Switching Loss Analysis: A New Insight

A Digitally Controlled Fully Integrated Voltage Regulator With On-Die Solenoid Inductor With Planar Magnetic Core in 14-nm Tri-Gate CMOS

A 500 MHz, 68% efficient, fully on-die digitally controlled buck Voltage Regulator on 22nm Tri-Gate CMOS