Although gold is the subject of one of the most ancient themes of investigation in science, its renaissance now leads to an exponentially increasing number of publications, especially in the context of emerging nanoscience and nanotechnology with nanoparticles and self-assembled monolayers (SAMs). We will limit the present review to gold nanoparticles (AuNPs), also called gold colloids. AuNPs are the most stable metal nanoparticles, and they present fascinating aspects such as their assembly of multiple types involving materials science, the behavior of the individual particles, size-related electronic, magnetic and optical properties (quantum size effect), and their applications to catalysis and biology. Their promises are in these fields as well as in the bottom-up approach of nanotechnology, and they will be key materials and building block in the 21st century. Whereas the extraction of gold started in the 5th millennium B.C. near Varna (Bulgaria) and reached 10 tons per year in Egypt around 1200-1300 B.C. when the marvelous statue of Touthankamon was constructed, it is probable that “soluble” gold appeared around the 5th or 4th century B.C. in Egypt and China. In antiquity, materials were used in an ecological sense for both aesthetic and curative purposes. Colloidal gold was used to make ruby glass 293 Chem. Rev. 2004, 104, 293−346

Gold nanoparticles: assembly, supramolecular chemistry, quantum-size-related properties, and applications toward biology, catalysis, and nanotechnology.

Detection of chemical and biological agents plays a fundamental role in biomedical, forensic and environmental sciences1–4 as well as in anti bioterrorism applications.5–7 The development of highly sensitive, cost effective, miniature sensors is therefore in high demand which requires advanced technology coupled with fundamental knowledge in chemistry, biology and material sciences.8–13

In general, sensors feature two functional components: a recognition element to provide selective/specific binding with the target analytes and a transducer component for signaling the binding event. An efficient sensor relies heavily on these two essential components for the recognition process in terms of response time, signal to noise (S/N) ratio, selectivity and limits of detection (LOD).14,15 Therefore, designing sensors with higher efficacy depends on the development of novel materials to improve both the recognition and transduction processes. Nanomaterials feature unique physicochemical properties that can be of great utility in creating new recognition and transduction processes for chemical and biological sensors15–27 as well as improving the S/N ratio by miniaturization of the sensor elements.28

Gold nanoparticles (AuNPs) possess distinct physical and chemical attributes that make them excellent scaffolds for the fabrication of novel chemical and biological sensors (Figure 1).29–36 First, AuNPs can be synthesized in a straightforward manner and can be made highly stable. Second, they possess unique optoelectronic properties. Third, they provide high surface-to-volume ratio with excellent biocompatibility using appropriate ligands.30 Fourth, these properties of AuNPs can be readily tuned varying their size, shape and the surrounding chemical environment. For example, the binding event between recognition element and the analyte can alter physicochemical properties of transducer AuNPs, such as plasmon resonance absorption, conductivity, redox behavior, etc. that in turn can generate a detectable response signal. Finally, AuNPs offer a suitable platform for multi-functionalization with a wide range of organic or biological ligands for the selective binding and detection of small molecules and biological targets.30–32,36 Each of these attributes of AuNPs has allowed researchers to develop novel sensing strategies with improved sensitivity, stability and selectivity. In the last decade of research, the advent of AuNP as a sensory element provided us a broad spectrum of innovative approaches for the detection of metal ions, small molecules, proteins, nucleic acids, malignant cells, etc. in a rapid and efficient manner.37



Figure 1

Physical properties of AuNPs and schematic illustration of an AuNP-based detection system.



In this current review, we have highlighted the several synthetic routes and properties of AuNPs that make them excellent probes for different sensing strategies. Furthermore, we will discuss various sensing strategies and major advances in the last two decades of research utilizing AuNPs in the detection of variety of target analytes including metal ions, organic molecules, proteins, nucleic acids, and microorganisms.

/pdf/gold-nanoparticles-in-chemical-and-biological-sensing-5e2qojkdzn.pdf

Gold nanoparticles in chemical and biological sensing.

https://is.muni.cz/el/1431/podzim2006/C7780/um/Read/2711172/SAM_str_grwth_ProgSurfSci00_151.pdf

Structure and growth of self-assembling monolayers

Atomic layer deposition(ALD), a chemical vapor deposition technique based on sequential self-terminating gas–solid reactions, has for about four decades been applied for manufacturing conformal inorganic material layers with thickness down to the nanometer range. Despite the numerous successful applications of material growth by ALD, many physicochemical processes that control ALD growth are not yet sufficiently understood. To increase understanding of ALD processes, overviews are needed not only of the existing ALD processes and their applications, but also of the knowledge of the surface chemistry of specific ALD processes. This work aims to start the overviews on specific ALD processes by reviewing the experimental information available on the surface chemistry of the trimethylaluminum/water process. This process is generally known as a rather ideal ALD process, and plenty of information is available on its surface chemistry. This in-depth summary of the surface chemistry of one representative ALD process aims also to provide a view on the current status of understanding the surface chemistry of ALD, in general. The review starts by describing the basic characteristics of ALD, discussing the history of ALD—including the question who made the first ALD experiments—and giving an overview of the two-reactant ALD processes investigated to date. Second, the basic concepts related to the surface chemistry of ALD are described from a generic viewpoint applicable to all ALD processes based on compound reactants. This description includes physicochemical requirements for self-terminating reactions,reaction kinetics, typical chemisorption mechanisms, factors causing saturation, reasons for growth of less than a monolayer per cycle, effect of the temperature and number of cycles on the growth per cycle (GPC), and the growth mode. A comparison is made of three models available for estimating the sterically allowed value of GPC in ALD. Third, the experimental information on the surface chemistry in the trimethylaluminum/water ALD process are reviewed using the concepts developed in the second part of this review. The results are reviewed critically, with an aim to combine the information obtained in different types of investigations, such as growth experiments on flat substrates and reaction chemistry investigation on high-surface-area materials. Although the surface chemistry of the trimethylaluminum/water ALD process is rather well understood, systematic investigations of the reaction kinetics and the growth mode on different substrates are still missing. The last part of the review is devoted to discussing issues which may hamper surface chemistry investigations of ALD, such as problematic historical assumptions, nonstandard terminology, and the effect of experimental conditions on the surface chemistry of ALD. I hope that this review can help the newcomer get acquainted with the exciting and challenging field of surface chemistry of ALD and can serve as a useful guide for the specialist towards the fifth decade of ALD research.

Surface chemistry of atomic layer deposition: A case study for the trimethylaluminum/water process

The Interaction of Water with Solid Surfaces: Fundamental Aspects Revisited

The formation and growth of self-assembled octadecylsiloxane monolayers on native silicon and mica substrates have been studied using atomic force microscopy, ellipsometry, and infrared spectroscop...

Formation of Self-Assembled Octadecylsiloxane Monolayers on Mica and Silicon Surfaces Studied by Atomic Force Microscopy and Infrared Spectroscopy

Experimental results that provide new insights into nanomanipulation phenomena are presented. Reliable and accurate positioning of colloidal nanoparticles on a surface is achieved by pushing them with the tip of an atomic force microscope under control of software that compensates for instrument errors. Mechanical pushing operations can be monitored in real time by acquiring simultaneously the cantilever deflection and the feedback signal (cantilever non-contact vibration amplitude). Understanding of the underlying phenomena and real-time monitoring of the operations are important for the design of strategies and control software to manipulate nanoparticles automatically. Manipulation by pushing can be accomplished in a variety of environments and materials. The resulting patterns of nanoparticles have many potential applications, from high-density data storage to single-electron electronics, and prototyping and fabrication of nanoelectromechanical systems.

https://iopscience.iop.org/article/10.1088/0957-4484/9/4/011/pdf

Nanoparticle manipulation by mechanical pushing: underlying phenomena and real-time monitoring

Hydroxylamine-seeding of colloidal gold particles has been used to fabricate gold nanostructures on a SiO2 substrate. Gold nanoparticles (15 nm diameter) were randomly deposited on a SiO2 surface that had been modified with aminopropyltrimethoxysilane (APTS). The nanoparticles were then manipulated using a scanning force microscope (SFM) tip to produce 1-D templates for gold deposition. We demonstrate the utility of this approach by fabricating a gold nanowire by using 13 nanoparticles as a template. The junction between joined (coated) particles was examined by mechanical manipulation, and homogeneous deposition was shown to form stable structures. This approach was also used to fabricate nanostructures in a small gap between two gold electrodes. Particles were pushed into the gap, and then gold deposition was used to “connect” the particles and electrodes. Although the particular structure tested was not electrically connected to the electrode, we suggest that this approach will be useful in tackling th...

Fabrication of Nanostructures by Hydroxylamine Seeding of Gold Nanoparticle Templates

AFM studies on ZnS thin films grown by atomic layer epitaxy

Manipulation of nanoparticles with the scanning force microscope (SFM) has been limited until now to clearing areas on a surface or to moving single particles sequentially to create two-dimensional patterns. The research reported here uses a previously described setup for nanomanipulation with the SFM to (i) build a simple three-dimensional pyramidal structure by pushing a nanoparticle on top of two others and (ii) rotate and translate a linked two-particle structure. The experiments are conducted in air and at room temperature with gold nanoparticles deposited on silicon previously coated with a silane layer.

R. Resch

Papers

Formation of Self-Assembled Octadecylsiloxane Monolayers on Mica and Silicon Surfaces Studied by Atomic Force Microscopy and Infrared Spectroscopy

Nanoparticle manipulation by mechanical pushing: underlying phenomena and real-time monitoring

Fabrication of Nanostructures by Hydroxylamine Seeding of Gold Nanoparticle Templates

AFM studies on ZnS thin films grown by atomic layer epitaxy

Building and Manipulating Three-Dimensional and Linked Two-Dimensional Structures of Nanoparticles Using Scanning Force Microscopy